Remove trailing whitespaces. No functional change.
Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@canonical.com --- drivers/gpu/drm/gma500/backlight.c | 4 +-- drivers/gpu/drm/gma500/cdv_intel_dp.c | 50 +++++++++++++-------------- 2 files changed, 26 insertions(+), 28 deletions(-)
diff --git a/drivers/gpu/drm/gma500/backlight.c b/drivers/gpu/drm/gma500/backlight.c index 35600d070cb5..9e90258541a4 100644 --- a/drivers/gpu/drm/gma500/backlight.c +++ b/drivers/gpu/drm/gma500/backlight.c @@ -42,7 +42,7 @@ void gma_backlight_disable(struct drm_device *dev) dev_priv->backlight_device->props.brightness = 0; do_gma_backlight_set(dev); } -#endif +#endif }
void gma_backlight_set(struct drm_device *dev, int v) @@ -54,7 +54,7 @@ void gma_backlight_set(struct drm_device *dev, int v) dev_priv->backlight_device->props.brightness = v; do_gma_backlight_set(dev); } -#endif +#endif }
int gma_backlight_init(struct drm_device *dev) diff --git a/drivers/gpu/drm/gma500/cdv_intel_dp.c b/drivers/gpu/drm/gma500/cdv_intel_dp.c index 6d3ada39ff86..595b765ecc71 100644 --- a/drivers/gpu/drm/gma500/cdv_intel_dp.c +++ b/drivers/gpu/drm/gma500/cdv_intel_dp.c @@ -245,7 +245,7 @@ i2c_dp_aux_add_bus(struct i2c_adapter *adapter) if (W && !in_dbg_master()) msleep(W); \ } \ ret__; \ -}) +})
#define wait_for(COND, MS) _wait_for(COND, MS, 1)
@@ -386,7 +386,7 @@ static void cdv_intel_edp_panel_vdd_on(struct gma_encoder *intel_encoder) if (intel_dp->panel_on) { DRM_DEBUG_KMS("Skip VDD on because of panel on\n"); return; - } + } DRM_DEBUG_KMS("\n");
pp = REG_READ(PP_CONTROL); @@ -433,7 +433,7 @@ static bool cdv_intel_edp_panel_on(struct gma_encoder *intel_encoder) DRM_DEBUG_KMS("Error in Powering up eDP panel, status %x\n", REG_READ(PP_STATUS)); intel_dp->panel_on = false; } else - intel_dp->panel_on = true; + intel_dp->panel_on = true; msleep(intel_dp->panel_power_up_delay);
return false; @@ -449,7 +449,7 @@ static void cdv_intel_edp_panel_off (struct gma_encoder *intel_encoder)
pp = REG_READ(PP_CONTROL);
- if ((pp & POWER_TARGET_ON) == 0) + if ((pp & POWER_TARGET_ON) == 0) return;
intel_dp->panel_on = false; @@ -464,7 +464,7 @@ static void cdv_intel_edp_panel_off (struct gma_encoder *intel_encoder) DRM_DEBUG_KMS("PP_STATUS %x\n", REG_READ(PP_STATUS));
if (wait_for((REG_READ(PP_STATUS) & idle_off_mask) == 0, 1000)) { - DRM_DEBUG_KMS("Error in turning off Panel\n"); + DRM_DEBUG_KMS("Error in turning off Panel\n"); }
msleep(intel_dp->panel_power_cycle_delay); @@ -535,7 +535,7 @@ cdv_intel_dp_mode_valid(struct drm_connector *connector, if (cdv_intel_dp_link_required(mode->clock, 24) > cdv_intel_dp_max_data_rate(max_link_clock, max_lanes)) return MODE_CLOCK_HIGH; - + } if (mode->clock < 10000) return MODE_CLOCK_LOW; @@ -606,7 +606,7 @@ cdv_intel_dp_aux_ch(struct gma_encoder *encoder, for (i = 0; i < send_bytes; i += 4) REG_WRITE(ch_data + i, pack_aux(send + i, send_bytes - i)); - + /* Send the command and wait for it to complete */ REG_WRITE(ch_ctl, DP_AUX_CH_CTL_SEND_BUSY | @@ -623,7 +623,7 @@ cdv_intel_dp_aux_ch(struct gma_encoder *encoder, break; udelay(100); } - + /* Clear done status and any errors */ REG_WRITE(ch_ctl, status | @@ -659,7 +659,7 @@ cdv_intel_dp_aux_ch(struct gma_encoder *encoder, DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT); if (recv_bytes > recv_size) recv_bytes = recv_size; - + for (i = 0; i < recv_bytes; i += 4) unpack_aux(REG_READ(ch_data + i), recv + i, recv_bytes - i); @@ -870,7 +870,7 @@ cdv_intel_dp_i2c_init(struct gma_connector *connector, ret = i2c_dp_aux_add_bus(&intel_dp->adapter); if (is_edp(encoder)) cdv_intel_edp_panel_vdd_off(encoder); - + return ret; }
@@ -1291,13 +1291,13 @@ cdv_intel_get_adjust_train(struct gma_encoder *encoder) if (this_p > p) p = this_p; } - + if (v >= CDV_DP_VOLTAGE_MAX) v = CDV_DP_VOLTAGE_MAX | DP_TRAIN_MAX_SWING_REACHED;
if (p == DP_TRAIN_PRE_EMPHASIS_MASK) p |= DP_TRAIN_MAX_PRE_EMPHASIS_REACHED; - + for (lane = 0; lane < 4; lane++) intel_dp->train_set[lane] = v | p; } @@ -1358,7 +1358,6 @@ cdv_intel_dp_set_link_train(struct gma_encoder *encoder, uint32_t dp_reg_value, uint8_t dp_train_pat) { - struct drm_device *dev = encoder->base.dev; int ret; struct cdv_intel_dp *intel_dp = encoder->dev_priv; @@ -1384,7 +1383,6 @@ static bool cdv_intel_dplink_set_level(struct gma_encoder *encoder, uint8_t dp_train_pat) { - int ret; struct cdv_intel_dp *intel_dp = encoder->dev_priv;
@@ -1462,7 +1460,7 @@ cdv_intel_dp_set_vswing_premph(struct gma_encoder *encoder, uint8_t signal_level /* ;gfx_dpio_set_reg(0x8124, 0x00004000) */ index = 2 * premph + 1; cdv_sb_write(dev, ddi_reg->PreEmph2, dp_vswing_premph_table[index]); - return; + return; }
@@ -1481,8 +1479,8 @@ cdv_intel_dp_start_link_train(struct gma_encoder *encoder)
DP |= DP_PORT_EN; DP &= ~DP_LINK_TRAIN_MASK; - - reg = DP; + + reg = DP; reg |= DP_LINK_TRAIN_PAT_1; /* Enable output, wait for it to become active */ REG_WRITE(intel_dp->output_reg, reg); @@ -1556,7 +1554,7 @@ cdv_intel_dp_start_link_train(struct gma_encoder *encoder) if (!clock_recovery) { DRM_DEBUG_KMS("failure in DP patter 1 training, train set %x\n", intel_dp->train_set[0]); } - + intel_dp->DP = DP; }
@@ -1747,7 +1745,7 @@ static int cdv_intel_dp_get_modes(struct drm_connector *connector) if (is_edp(intel_encoder)) { struct drm_device *dev = connector->dev; struct drm_psb_private *dev_priv = dev->dev_private; - + cdv_intel_edp_panel_vdd_off(intel_encoder); if (ret) { if (edp && !intel_dp->panel_fixed_mode) { @@ -1942,11 +1940,11 @@ static void cdv_disable_intel_clock_gating(struct drm_device *dev) DPCUNIT_CLOCK_GATE_DISABLE | DPLSUNIT_CLOCK_GATE_DISABLE | DPOUNIT_CLOCK_GATE_DISABLE | - DPIOUNIT_CLOCK_GATE_DISABLE); + DPIOUNIT_CLOCK_GATE_DISABLE);
REG_WRITE(DSPCLK_GATE_D, reg_value);
- udelay(500); + udelay(500); }
void @@ -1990,7 +1988,7 @@ cdv_intel_dp_init(struct drm_device *dev, struct psb_intel_mode_device *mode_dev gma_encoder->dev_priv=intel_dp; intel_dp->encoder = gma_encoder; intel_dp->output_reg = output_reg; - + drm_encoder_helper_add(encoder, &cdv_intel_dp_helper_funcs); drm_connector_helper_add(connector, &cdv_intel_dp_connector_helper_funcs);
@@ -2027,7 +2025,7 @@ cdv_intel_dp_init(struct drm_device *dev, struct psb_intel_mode_device *mode_dev pp_on = REG_READ(PP_CONTROL); pp_on &= ~PANEL_UNLOCK_MASK; pp_on |= PANEL_UNLOCK_REGS; - + REG_WRITE(PP_CONTROL, pp_on);
pwm_ctrl = REG_READ(BLC_PWM_CTL2); @@ -2037,7 +2035,7 @@ cdv_intel_dp_init(struct drm_device *dev, struct psb_intel_mode_device *mode_dev pp_on = REG_READ(PP_ON_DELAYS); pp_off = REG_READ(PP_OFF_DELAYS); pp_div = REG_READ(PP_DIVISOR); - + /* Pull timing values out of registers */ cur.t1_t3 = (pp_on & PANEL_POWER_UP_DELAY_MASK) >> PANEL_POWER_UP_DELAY_SHIFT; @@ -2085,9 +2083,9 @@ cdv_intel_dp_init(struct drm_device *dev, struct psb_intel_mode_device *mode_dev goto err_connector; } else { DRM_DEBUG_KMS("DPCD: Rev=%x LN_Rate=%x LN_CNT=%x LN_DOWNSP=%x\n", - intel_dp->dpcd[0], intel_dp->dpcd[1], + intel_dp->dpcd[0], intel_dp->dpcd[1], intel_dp->dpcd[2], intel_dp->dpcd[3]); - + } /* The CDV reference driver moves pnale backlight setup into the displays that have a backlight: this is a good idea and one we should probably adopt, however