[PATCH 15/15] ARM: dts: sun8i: r40: Enable HDMI output on BananaPi M2 Ultra

Since HDMI can be considered as main output, most capable mixer is connected to it (mixer0).

Signed-off-by: Jernej Skrabec jernej.skrabec@siol.net --- .../boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 50 +++++++++++++++++++ 1 file changed, 50 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts index 27d9ccd0ef2f..66b492ad5847 100644 --- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts +++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts @@ -58,6 +58,17 @@ stdout-path = "serial0:115200n8"; };

+ connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds";

@@ -93,6 +104,10 @@ }; };

+&de { + status = "okay"; +}; + &ehci1 { status = "okay"; }; @@ -101,6 +116,22 @@ status = "okay"; };

+&hdmi { + status = "okay"; +}; + +&hdmi_in { + hdmi_in_tcon_tv0: endpoint { + remote-endpoint = <&tcon_tv0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { status = "okay";

@@ -161,6 +192,12 @@ regulator-name = "vcc-wifi"; };

+&mixer0_out { + mixer0_out_tcon_tv0: endpoint { + remote-endpoint = <&tcon_tv0_in_mixer0>; + }; +}; + &mmc0 { vmmc-supply = <&reg_dcdc1>; bus-width = <4>; @@ -195,6 +232,19 @@ status = "okay"; };

+&tcon_tv0_in { + tcon_tv0_in_mixer0: endpoint { + remote-endpoint = <&mixer0_out_tcon_tv0>; + }; +}; + +&tcon_tv0_out { + tcon_tv0_out_hdmi: endpoint@1 { + reg = <1>; + remote-endpoint = <&hdmi_in_tcon_tv0>; + }; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>;