This patch adds Raydium Semiconductor Corporation rm68200 5.5" 720x1280 TFT LCD panel driver (MIPI-DSI video mode).
Signed-off-by: Philippe Cornu philippe.cornu@st.com --- drivers/gpu/drm/panel/Kconfig | 8 + drivers/gpu/drm/panel/Makefile | 1 + drivers/gpu/drm/panel/panel-raydium-rm68200.c | 464 ++++++++++++++++++++++++++ 3 files changed, 473 insertions(+) create mode 100755 drivers/gpu/drm/panel/panel-raydium-rm68200.c
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index 988048ebcc22..08d99dd46765 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -108,6 +108,14 @@ config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN Pi 7" Touchscreen. To compile this driver as a module, choose M here.
+config DRM_PANEL_RAYDIUM_RM68200 + tristate "Raydium rm68200 720x1280 dsi 2dl video mode panel" + depends on OF + depends on DRM_MIPI_DSI + help + Say Y here if you want to enable support for Raydium rm68200 + 720x1280 dsi 2dl video mode panel + config DRM_PANEL_SAMSUNG_S6E3HA2 tristate "Samsung S6E3HA2 DSI video mode panel" depends on OF diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile index 3d2a88d0e965..f26efc11d746 100644 --- a/drivers/gpu/drm/panel/Makefile +++ b/drivers/gpu/drm/panel/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o obj-$(CONFIG_DRM_PANEL_ORISETECH_OTM8009A) += panel-orisetech-otm8009a.o obj-$(CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00) += panel-panasonic-vvx10f034n00.o obj-$(CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN) += panel-raspberrypi-touchscreen.o +obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM68200) += panel-raydium-rm68200.o obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2) += panel-samsung-s6e3ha2.o obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03) += panel-samsung-s6e63j0x03.o diff --git a/drivers/gpu/drm/panel/panel-raydium-rm68200.c b/drivers/gpu/drm/panel/panel-raydium-rm68200.c new file mode 100755 index 000000000000..f3e15873d05a --- /dev/null +++ b/drivers/gpu/drm/panel/panel-raydium-rm68200.c @@ -0,0 +1,464 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) STMicroelectronics SA 2017 + * + * Authors: Philippe Cornu philippe.cornu@st.com + * Yannick Fertre yannick.fertre@st.com + */ + +#include <drm/drmP.h> +#include <drm/drm_mipi_dsi.h> +#include <drm/drm_panel.h> +#include <linux/backlight.h> +#include <linux/gpio/consumer.h> +#include <linux/regulator/consumer.h> +#include <video/mipi_display.h> + +#define DRV_NAME "raydium_rm68200" + +/*** Manufacturer Command Set ***/ +#define MCS_CMD_MODE_SW 0xFE /* CMD Mode Switch */ +#define MCS_CMD1_UCS 0x00 /* User Command Set (UCS = CMD1) */ +#define MCS_CMD2_P0 0x01 /* Manufacture Command Set Page0 (CMD2 P0) */ +#define MCS_CMD2_P1 0x02 /* Manufacture Command Set Page1 (CMD2 P1) */ +#define MCS_CMD2_P2 0x03 /* Manufacture Command Set Page2 (CMD2 P2) */ +#define MCS_CMD2_P3 0x04 /* Manufacture Command Set Page3 (CMD2 P3) */ + +/* CMD2 P0 commands (Display Options and Power) */ +#define MCS_STBCTR 0x12 /* TE1 Output Setting Zig-Zag Connection */ +#define MCS_SGOPCTR 0x16 /* Source Bias Current */ +#define MCS_SDCTR 0x1A /* Source Output Delay Time */ +#define MCS_INVCTR 0x1B /* Inversion Type */ +#define MCS_EXT_PWR_IC 0x24 /* External PWR IC Control */ +#define MCS_SETAVDD 0x27 /* PFM Control for AVDD Output */ +#define MCS_SETAVEE 0x29 /* PFM Control for AVEE Output */ +#define MCS_BT2CTR 0x2B /* DDVDL Charge Pump Control */ +#define MCS_BT3CTR 0x2F /* VGH Charge Pump Control */ +#define MCS_BT4CTR 0x34 /* VGL Charge Pump Control */ +#define MCS_VCMCTR 0x46 /* VCOM Output Level Control */ +#define MCS_SETVGN 0x52 /* VG M/S N Control */ +#define MCS_SETVGP 0x54 /* VG M/S P Control */ +#define MCS_SW_CTRL 0x5F /* Interface Control for PFM and MIPI */ + +/* CMD2 P2 commands (GOA Timing Control) - no description in datasheet */ +#define GOA_VSTV1 0x00 +#define GOA_VSTV2 0x07 +#define GOA_VCLK1 0x0E +#define GOA_VCLK2 0x17 +#define GOA_VCLK_OPT1 0x20 +#define GOA_BICLK1 0x2A +#define GOA_BICLK2 0x37 +#define GOA_BICLK3 0x44 +#define GOA_BICLK4 0x4F +#define GOA_BICLK_OPT1 0x5B +#define GOA_BICLK_OPT2 0x60 +#define MCS_GOA_GPO1 0x6D +#define MCS_GOA_GPO2 0x71 +#define MCS_GOA_EQ 0x74 +#define MCS_GOA_CLK_GALLON 0x7C +#define MCS_GOA_FS_SEL0 0x7E +#define MCS_GOA_FS_SEL1 0x87 +#define MCS_GOA_FS_SEL2 0x91 +#define MCS_GOA_FS_SEL3 0x9B +#define MCS_GOA_BS_SEL0 0xAC +#define MCS_GOA_BS_SEL1 0xB5 +#define MCS_GOA_BS_SEL2 0xBF +#define MCS_GOA_BS_SEL3 0xC9 +#define MCS_GOA_BS_SEL4 0xD3 + +/* CMD2 P3 commands (Gamma) */ +#define MCS_GAMMA_VP 0x60 /* Gamma VP1~VP16 */ +#define MCS_GAMMA_VN 0x70 /* Gamma VN1~VN16 */ + +struct rm68200 { + struct device *dev; + struct drm_panel panel; + struct gpio_desc *reset_gpio; + struct regulator *supply; + struct backlight_device *bl_dev; + bool prepared; + bool enabled; +}; + +static const struct drm_display_mode default_mode = { + .clock = 52582, + .hdisplay = 720, + .hsync_start = 720 + 38, + .hsync_end = 720 + 38 + 8, + .htotal = 720 + 38 + 8 + 38, + .vdisplay = 1280, + .vsync_start = 1280 + 12, + .vsync_end = 1280 + 12 + 4, + .vtotal = 1280 + 12 + 4 + 12, + .vrefresh = 50, + .flags = 0, + .width_mm = 68, + .height_mm = 122, +}; + +static inline struct rm68200 *panel_to_rm68200(struct drm_panel *panel) +{ + return container_of(panel, struct rm68200, panel); +} + +static void rm68200_dcs_write_buf(struct rm68200 *ctx, const void *data, + size_t len) +{ + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + + if (mipi_dsi_dcs_write_buffer(dsi, data, len) < 0) + DRM_WARN("mipi dsi dcs write buffer failed\n"); +} + +static void rm68200_dcs_write_cmd(struct rm68200 *ctx, u8 cmd, u8 value) +{ + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + + if (mipi_dsi_dcs_write(dsi, cmd, &value, 1) < 0) + DRM_WARN("mipi dsi dcs write failed\n"); +} + +#define dcs_write_seq(ctx, seq...) \ +({ \ + static const u8 d[] = { seq }; \ + rm68200_dcs_write_buf(ctx, d, ARRAY_SIZE(d)); \ +}) + +/* + * This panel is not able to auto-increment all cmd addresses so for some of + * them, we need to send them one by one... + */ +#define dcs_write_cmd_seq(ctx, cmd, seq...) \ +({ \ + static const u8 d[] = { seq }; \ + static int i; \ + for (i = 0; i < ARRAY_SIZE(d) ; i++) \ + rm68200_dcs_write_cmd(ctx, cmd + i, d[i]); \ +}) + +static void rm68200_init_sequence(struct rm68200 *ctx) +{ + /* Enter CMD2 with page 0 */ + dcs_write_seq(ctx, MCS_CMD_MODE_SW, MCS_CMD2_P0); + dcs_write_cmd_seq(ctx, MCS_EXT_PWR_IC, 0xC0, 0x53, 0x00); + dcs_write_seq(ctx, MCS_BT2CTR, 0xE5); + dcs_write_seq(ctx, MCS_SETAVDD, 0x0A); + dcs_write_seq(ctx, MCS_SETAVEE, 0x0A); + dcs_write_seq(ctx, MCS_SGOPCTR, 0x52); + dcs_write_seq(ctx, MCS_BT3CTR, 0x53); + dcs_write_seq(ctx, MCS_BT4CTR, 0x5A); + dcs_write_seq(ctx, MCS_INVCTR, 0x00); + dcs_write_seq(ctx, MCS_STBCTR, 0x0A); + dcs_write_seq(ctx, MCS_SDCTR, 0x06); + dcs_write_seq(ctx, MCS_VCMCTR, 0x56); + dcs_write_seq(ctx, MCS_SETVGN, 0xA0, 0x00); + dcs_write_seq(ctx, MCS_SETVGP, 0xA0, 0x00); + dcs_write_seq(ctx, MCS_SW_CTRL, 0x11); /* 2 data lanes, see doc */ + + dcs_write_seq(ctx, MCS_CMD_MODE_SW, MCS_CMD2_P2); + dcs_write_seq(ctx, GOA_VSTV1, 0x05); + dcs_write_seq(ctx, 0x02, 0x0B); + dcs_write_seq(ctx, 0x03, 0x0F); + dcs_write_seq(ctx, 0x04, 0x7D, 0x00, 0x50); + dcs_write_cmd_seq(ctx, GOA_VSTV2, 0x05, 0x16, 0x0D, 0x11, 0x7D, 0x00, + 0x50); + dcs_write_cmd_seq(ctx, GOA_VCLK1, 0x07, 0x08, 0x01, 0x02, 0x00, 0x7D, + 0x00, 0x85, 0x08); + dcs_write_cmd_seq(ctx, GOA_VCLK2, 0x03, 0x04, 0x05, 0x06, 0x00, 0x7D, + 0x00, 0x85, 0x08); + dcs_write_seq(ctx, GOA_VCLK_OPT1, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00); + dcs_write_cmd_seq(ctx, GOA_BICLK1, 0x07, 0x08); + dcs_write_seq(ctx, 0x2D, 0x01); + dcs_write_seq(ctx, 0x2F, 0x02, 0x00, 0x40, 0x05, 0x08, 0x54, 0x7D, + 0x00); + dcs_write_cmd_seq(ctx, GOA_BICLK2, 0x03, 0x04, 0x05, 0x06, 0x00); + dcs_write_seq(ctx, 0x3D, 0x40); + dcs_write_seq(ctx, 0x3F, 0x05, 0x08, 0x54, 0x7D, 0x00); + dcs_write_seq(ctx, GOA_BICLK3, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00); + dcs_write_seq(ctx, GOA_BICLK4, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00); + dcs_write_seq(ctx, 0x58, 0x00, 0x00, 0x00); + dcs_write_seq(ctx, GOA_BICLK_OPT1, 0x00, 0x00, 0x00, 0x00, 0x00); + dcs_write_seq(ctx, GOA_BICLK_OPT2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00); + dcs_write_seq(ctx, MCS_GOA_GPO1, 0x00, 0x00, 0x00, 0x00); + dcs_write_seq(ctx, MCS_GOA_GPO2, 0x00, 0x20, 0x00); + dcs_write_seq(ctx, MCS_GOA_EQ, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, + 0x00, 0x00); + dcs_write_seq(ctx, MCS_GOA_CLK_GALLON, 0x00, 0x00); + dcs_write_cmd_seq(ctx, MCS_GOA_FS_SEL0, 0xBF, 0x02, 0x06, 0x14, 0x10, + 0x16, 0x12, 0x08, 0x3F); + dcs_write_cmd_seq(ctx, MCS_GOA_FS_SEL1, 0x3F, 0x3F, 0x3F, 0x3F, 0x0C, + 0x0A, 0x0E, 0x3F, 0x3F, 0x00); + dcs_write_cmd_seq(ctx, MCS_GOA_FS_SEL2, 0x04, 0x3F, 0x3F, 0x3F, 0x3F, + 0x05, 0x01, 0x3F, 0x3F, 0x0F); + dcs_write_cmd_seq(ctx, MCS_GOA_FS_SEL3, 0x0B, 0x0D, 0x3F, 0x3F, 0x3F, + 0x3F); + dcs_write_cmd_seq(ctx, 0xA2, 0x3F, 0x09, 0x13, 0x17, 0x11, 0x15); + dcs_write_cmd_seq(ctx, 0xA9, 0x07, 0x03, 0x3F); + dcs_write_cmd_seq(ctx, MCS_GOA_BS_SEL0, 0x3F, 0x05, 0x01, 0x17, 0x13, + 0x15, 0x11, 0x0F, 0x3F); + dcs_write_cmd_seq(ctx, MCS_GOA_BS_SEL1, 0x3F, 0x3F, 0x3F, 0x3F, 0x0B, + 0x0D, 0x09, 0x3F, 0x3F, 0x07); + dcs_write_cmd_seq(ctx, MCS_GOA_BS_SEL2, 0x03, 0x3F, 0x3F, 0x3F, 0x3F, + 0x02, 0x06, 0x3F, 0x3F, 0x08); + dcs_write_cmd_seq(ctx, MCS_GOA_BS_SEL3, 0x0C, 0x0A, 0x3F, 0x3F, 0x3F, + 0x3F, 0x3F, 0x0E, 0x10, 0x14); + dcs_write_cmd_seq(ctx, MCS_GOA_BS_SEL4, 0x12, 0x16, 0x00, 0x04, 0x3F); + dcs_write_seq(ctx, 0xDC, 0x02); + dcs_write_seq(ctx, 0xDE, 0x12); + + dcs_write_seq(ctx, MCS_CMD_MODE_SW, 0x0E); /* No documentation */ + dcs_write_seq(ctx, 0x01, 0x75); + + dcs_write_seq(ctx, MCS_CMD_MODE_SW, MCS_CMD2_P3); + dcs_write_cmd_seq(ctx, MCS_GAMMA_VP, 0x00, 0x0C, 0x12, 0x0E, 0x06, + 0x12, 0x0E, 0x0B, 0x15, 0x0B, 0x10, 0x07, 0x0F, + 0x12, 0x0C, 0x00); + dcs_write_cmd_seq(ctx, MCS_GAMMA_VN, 0x00, 0x0C, 0x12, 0x0E, 0x06, + 0x12, 0x0E, 0x0B, 0x15, 0x0B, 0x10, 0x07, 0x0F, + 0x12, 0x0C, 0x00); + + /* Exit CMD2 */ + dcs_write_seq(ctx, MCS_CMD_MODE_SW, MCS_CMD1_UCS); +} + +static int rm68200_disable(struct drm_panel *panel) +{ + struct rm68200 *ctx = panel_to_rm68200(panel); + + if (!ctx->enabled) + return 0; + + if (ctx->bl_dev) { + ctx->bl_dev->props.power = FB_BLANK_POWERDOWN; + ctx->bl_dev->props.state |= BL_CORE_FBBLANK; + backlight_update_status(ctx->bl_dev); + } + + ctx->enabled = false; + + return 0; +} + +static int rm68200_unprepare(struct drm_panel *panel) +{ + struct rm68200 *ctx = panel_to_rm68200(panel); + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + int ret; + + if (!ctx->prepared) + return 0; + + ret = mipi_dsi_dcs_set_display_off(dsi); + if (ret) + DRM_WARN("failed to set display off: %d\n", ret); + + ret = mipi_dsi_dcs_enter_sleep_mode(dsi); + if (ret) + DRM_WARN("failed to enter sleep mode: %d\n", ret); + + msleep(120); + + if (ctx->reset_gpio) { + gpiod_set_value_cansleep(ctx->reset_gpio, 1); + msleep(20); + } + + regulator_disable(ctx->supply); + + ctx->prepared = false; + + return 0; +} + +static int rm68200_prepare(struct drm_panel *panel) +{ + struct rm68200 *ctx = panel_to_rm68200(panel); + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + int ret; + + if (ctx->prepared) + return 0; + + ret = regulator_enable(ctx->supply); + if (ret < 0) { + DRM_ERROR("failed to enable supply: %d\n", ret); + return ret; + } + + if (ctx->reset_gpio) { + gpiod_set_value_cansleep(ctx->reset_gpio, 0); + gpiod_set_value_cansleep(ctx->reset_gpio, 1); + msleep(20); + gpiod_set_value_cansleep(ctx->reset_gpio, 0); + msleep(100); + } + + rm68200_init_sequence(ctx); + + ret = mipi_dsi_dcs_exit_sleep_mode(dsi); + if (ret) + return ret; + + msleep(125); + + ret = mipi_dsi_dcs_set_display_on(dsi); + if (ret) + return ret; + + msleep(20); + + ctx->prepared = true; + + return 0; +} + +static int rm68200_enable(struct drm_panel *panel) +{ + struct rm68200 *ctx = panel_to_rm68200(panel); + + if (ctx->enabled) + return 0; + + if (ctx->bl_dev) { + ctx->bl_dev->props.state &= ~BL_CORE_FBBLANK; + ctx->bl_dev->props.power = FB_BLANK_UNBLANK; + backlight_update_status(ctx->bl_dev); + } + + ctx->enabled = true; + + return 0; +} + +static int rm68200_get_modes(struct drm_panel *panel) +{ + struct drm_display_mode *mode; + + mode = drm_mode_duplicate(panel->drm, &default_mode); + if (!mode) { + DRM_ERROR("failed to add mode %ux%ux@%u\n", + default_mode.hdisplay, default_mode.vdisplay, + default_mode.vrefresh); + return -ENOMEM; + } + + drm_mode_set_name(mode); + + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; + drm_mode_probed_add(panel->connector, mode); + + panel->connector->display_info.width_mm = mode->width_mm; + panel->connector->display_info.height_mm = mode->height_mm; + + return 1; +} + +static const struct drm_panel_funcs rm68200_drm_funcs = { + .disable = rm68200_disable, + .unprepare = rm68200_unprepare, + .prepare = rm68200_prepare, + .enable = rm68200_enable, + .get_modes = rm68200_get_modes, +}; + +static int rm68200_probe(struct mipi_dsi_device *dsi) +{ + struct device *dev = &dsi->dev; + struct device_node *backlight; + struct rm68200 *ctx; + int ret; + + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(ctx->reset_gpio)) { + dev_err(dev, "cannot get reset-gpio\n"); + return PTR_ERR(ctx->reset_gpio); + } + + ctx->supply = devm_regulator_get(dev, "power"); + if (IS_ERR(ctx->supply)) { + dev_err(dev, "cannot get regulator\n"); + return PTR_ERR(ctx->supply); + } + + backlight = of_parse_phandle(dev->of_node, "backlight", 0); + if (backlight) { + ctx->bl_dev = of_find_backlight_by_node(backlight); + of_node_put(backlight); + + if (!ctx->bl_dev) + return -EPROBE_DEFER; + } + + mipi_dsi_set_drvdata(dsi, ctx); + + ctx->dev = dev; + + dsi->lanes = 2; + dsi->format = MIPI_DSI_FMT_RGB888; + dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST | + MIPI_DSI_MODE_LPM; + + drm_panel_init(&ctx->panel); + ctx->panel.dev = dev; + ctx->panel.funcs = &rm68200_drm_funcs; + + drm_panel_add(&ctx->panel); + + ret = mipi_dsi_attach(dsi); + if (ret < 0) { + dev_err(dev, "mipi_dsi_attach failed. Is host ready?\n"); + drm_panel_remove(&ctx->panel); + if (ctx->bl_dev) + put_device(&ctx->bl_dev->dev); + return ret; + } + + DRM_INFO(DRV_NAME "_panel %ux%u@%u %ubpp dsi %udl - ready\n", + default_mode.hdisplay, default_mode.vdisplay, + default_mode.vrefresh, + mipi_dsi_pixel_format_to_bpp(dsi->format), dsi->lanes); + + return 0; +} + +static int rm68200_remove(struct mipi_dsi_device *dsi) +{ + struct rm68200 *ctx = mipi_dsi_get_drvdata(dsi); + + if (ctx->bl_dev) + put_device(&ctx->bl_dev->dev); + + mipi_dsi_detach(dsi); + drm_panel_remove(&ctx->panel); + + return 0; +} + +static const struct of_device_id raydium_rm68200_of_match[] = { + { .compatible = "raydium,rm68200" }, + { } +}; +MODULE_DEVICE_TABLE(of, raydium_rm68200_of_match); + +static struct mipi_dsi_driver raydium_rm68200_driver = { + .probe = rm68200_probe, + .remove = rm68200_remove, + .driver = { + .name = DRV_NAME "_panel", + .of_match_table = raydium_rm68200_of_match, + }, +}; +module_mipi_dsi_driver(raydium_rm68200_driver); + +MODULE_AUTHOR("Philippe Cornu philippe.cornu@st.com"); +MODULE_AUTHOR("Yannick Fertre yannick.fertre@st.com"); +MODULE_DESCRIPTION("DRM Driver for Raydium RM68200 MIPI DSI panel"); +MODULE_LICENSE("GPL v2");