On 03/30/2016 04:03 PM, Jani Nikula wrote:
From: Deepak M m.deepak@intel.com
Adding new DCS commands which are specified in the DCS 1.3 spec related to CABC.
v2: Sorted the Macro`s by value (Andrzej)
v3 by Jani: sort all of enum, refer to MIPI DCS 1.3
Cc: Andrzej Hajda a.hajda@samsung.com Cc: Thierry Reding thierry.reding@gmail.com Cc: David Airlie airlied@linux.ie Cc: Ville Syrjälä ville.syrjala@linux.intel.com Cc: Daniel Vetter daniel.vetter@intel.com Cc: dri-devel@lists.freedesktop.org Suggested-by: Jani Nikula jani.nikula@intel.com Signed-off-by: Deepak M m.deepak@intel.com Signed-off-by: Jani Nikula jani.nikula@intel.com
DCS 1.3 introduces also: get_error_count_on_DSI 05h get_image_checksum_ct 15h get_image_checksum_rgb 14h read_PPS_continue a9h read_PPS_start A2h
It would be good to add them, but as the patch says it adds only CABC related commands so no big deal.
Reviewed-by: Andrzej Hajda a.hajda@samsung.com
Regards Andrzej
include/video/mipi_display.h | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/include/video/mipi_display.h b/include/video/mipi_display.h index ddcc8ca7316b..19aa65a35546 100644 --- a/include/video/mipi_display.h +++ b/include/video/mipi_display.h @@ -115,6 +115,14 @@ enum { MIPI_DCS_READ_MEMORY_CONTINUE = 0x3E, MIPI_DCS_SET_TEAR_SCANLINE = 0x44, MIPI_DCS_GET_SCANLINE = 0x45,
- MIPI_DCS_SET_DISPLAY_BRIGHTNESS = 0x51, /* MIPI DCS 1.3 */
- MIPI_DCS_GET_DISPLAY_BRIGHTNESS = 0x52, /* MIPI DCS 1.3 */
- MIPI_DCS_WRITE_CONTROL_DISPLAY = 0x53, /* MIPI DCS 1.3 */
- MIPI_DCS_GET_CONTROL_DISPLAY = 0x54, /* MIPI DCS 1.3 */
- MIPI_DCS_WRITE_POWER_SAVE = 0x55, /* MIPI DCS 1.3 */
- MIPI_DCS_GET_POWER_SAVE = 0x56, /* MIPI DCS 1.3 */
- MIPI_DCS_SET_CABC_MIN_BRIGHTNESS = 0x5E, /* MIPI DCS 1.3 */
- MIPI_DCS_GET_CABC_MIN_BRIGHTNESS = 0x5F, /* MIPI DCS 1.3 */ MIPI_DCS_READ_DDB_START = 0xA1, MIPI_DCS_READ_DDB_CONTINUE = 0xA8,
};