W dniu 21.09.2021 o 18:22, Dmitry Baryshkov pisze:
The DSI host might be left in some state by the bootloader. If this state generates an IRQ, it might hang the system by holding the interrupt line before the driver sets up the DSI host to the known state.
Move the request/free_irq calls into msm_dsi_host_power_on/_off calls, so that we can be sure that the interrupt is delivered when the host is in the known state.
The established practice is to request IRQ in probe, to avoid auto-enabling use IRQF_NO_AUTOEN flag.
Then you can call enable_irq in power-on.
Regards
Andrzej
Fixes: a689554ba6ed ("drm/msm: Initial add DSI connector support") Signed-off-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org
drivers/gpu/drm/msm/dsi/dsi_host.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c index e269df285136..cd842347a6b1 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_host.c +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c @@ -1951,15 +1951,6 @@ int msm_dsi_host_modeset_init(struct mipi_dsi_host *host, return ret; }
- ret = devm_request_irq(&pdev->dev, msm_host->irq,
dsi_host_irq, IRQF_TRIGGER_HIGH | IRQF_ONESHOT,"dsi_isr", msm_host);- if (ret < 0) {
DRM_DEV_ERROR(&pdev->dev, "failed to request IRQ%u: %d\n",msm_host->irq, ret);return ret;- }
- msm_host->dev = dev; ret = cfg_hnd->ops->tx_buf_alloc(msm_host, SZ_4K); if (ret) {
@@ -2413,6 +2404,16 @@ int msm_dsi_host_power_on(struct mipi_dsi_host *host, if (msm_host->disp_en_gpio) gpiod_set_value(msm_host->disp_en_gpio, 1);
- ret = devm_request_irq(&msm_host->pdev->dev, msm_host->irq,
dsi_host_irq, IRQF_TRIGGER_HIGH | IRQF_ONESHOT,"dsi_isr", msm_host);- if (ret < 0) {
DRM_DEV_ERROR(&msm_host->pdev->dev, "failed to request IRQ%u: %d\n",msm_host->irq, ret);return ret;- }
- msm_host->power_on = true; mutex_unlock(&msm_host->dev_mutex);
@@ -2439,6 +2440,8 @@ int msm_dsi_host_power_off(struct mipi_dsi_host *host) goto unlock_ret; }
devm_free_irq(&msm_host->pdev->dev, msm_host->irq, msm_host);
dsi_ctrl_config(msm_host, false, NULL, NULL);
if (msm_host->disp_en_gpio)