From: Jernej Skrabec jernej.skrabec@siol.net
This adds DW-HDMI driver a glue option to disable loading of the CEC sub-driver.
On some SoCs, the CEC functionality is enabled in the IP config bits, but the CEC bus is non-functional like on Amlogic SoCs, where the CEC config bit is set but the DW-HDMI CEC signal is not connected to a physical pin, leading to some confusion when the DW-HDMI CEC controller can't communicate on the bus.
Reviewed-by: Neil Armstrong narmstrong@baylibre.com Signed-off-by: Jernej Skrabec jernej.skrabec@siol.net Signed-off-by: Neil Armstrong narmstrong@baylibre.com --- drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 2 +- include/drm/bridge/dw_hdmi.h | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c index dda4fa9a1a08..ae97513ef886 100644 --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c @@ -3421,7 +3421,7 @@ struct dw_hdmi *dw_hdmi_probe(struct platform_device *pdev, hdmi->audio = platform_device_register_full(&pdevinfo); }
- if (config0 & HDMI_CONFIG0_CEC) { + if (!plat_data->disable_cec && (config0 & HDMI_CONFIG0_CEC)) { cec.hdmi = hdmi; cec.ops = &dw_hdmi_cec_ops; cec.irq = irq; diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h index ea34ca146b82..6a5716655619 100644 --- a/include/drm/bridge/dw_hdmi.h +++ b/include/drm/bridge/dw_hdmi.h @@ -153,6 +153,8 @@ struct dw_hdmi_plat_data { const struct dw_hdmi_phy_config *phy_config; int (*configure_phy)(struct dw_hdmi *hdmi, void *data, unsigned long mpixelclock); + + unsigned int disable_cec : 1; };
struct dw_hdmi *dw_hdmi_probe(struct platform_device *pdev,