This converts the v3d bindings to yaml format.
Signed-off-by: Stefan Wahren stefan.wahren@i2se.com --- .../devicetree/bindings/gpu/brcm,bcm-v3d.txt | 33 ---------- .../devicetree/bindings/gpu/brcm,bcm-v3d.yaml | 76 ++++++++++++++++++++++ 2 files changed, 76 insertions(+), 33 deletions(-) delete mode 100644 Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt create mode 100644 Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml
diff --git a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt deleted file mode 100644 index b2df82b..0000000 --- a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt +++ /dev/null @@ -1,33 +0,0 @@ -Broadcom V3D GPU - -Only the Broadcom V3D 3.x and newer GPUs are covered by this binding. -For V3D 2.x, see brcm,bcm-vc4.txt. - -Required properties: -- compatible: Should be "brcm,7268-v3d" or "brcm,7278-v3d" -- reg: Physical base addresses and lengths of the register areas -- reg-names: Names for the register areas. The "hub" and "core0" - register areas are always required. The "gca" register area - is required if the GCA cache controller is present. The - "bridge" register area is required if an external reset - controller is not present. -- interrupts: The interrupt numbers. The first interrupt is for the hub, - while the following interrupts are separate interrupt lines - for the cores (if they don't share the hub's interrupt). - See bindings/interrupt-controller/interrupts.txt - -Optional properties: -- clocks: The core clock the unit runs on -- resets: The reset line for v3d, if not using a mapping of the bridge - See bindings/reset/reset.txt - -v3d { - compatible = "brcm,7268-v3d"; - reg = <0xf1204000 0x100>, - <0xf1200000 0x4000>, - <0xf1208000 0x4000>, - <0xf1204100 0x100>; - reg-names = "bridge", "hub", "core0", "gca"; - interrupts = <0 78 4>, - <0 77 4>; -}; diff --git a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml new file mode 100644 index 0000000..a2b06d42 --- /dev/null +++ b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpu/brcm,bcm-v3d.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom V3D GPU Bindings + +maintainers: + - Eric Anholt eric@anholt.net + - Nicolas Saenz Julienne nsaenzjulienne@suse.de + +properties: + $nodename: + pattern: '^gpu@[a-f0-9]+$' + + compatible: + enum: + - brcm,7268-v3d + - brcm,7278-v3d + + reg: + items: + - description: hub register + - description: core0 register + - description: GCA cache controller register (if GCA controller) + - description: bridge register (if no external reset controller) + minItems: 2 + maxItems: 4 + + reg-names: + items: + enum: [ bridge, core0, gca, hub ] + minItems: 2 + maxItems: 4 + + interrupts: + items: + - description: hub interrupt + - description: core interrupt (if it doesn't share the hub's interrupt) + minItems: 1 + maxItems: 2 + + clocks: + maxItems: 1 + + clock-names: + maxItems: 1 + + resets: + maxItems: 1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + gpu@f1200000 { + compatible = "brcm,7268-v3d"; + reg = <0xf1204000 0x100>, + <0xf1200000 0x4000>, + <0xf1208000 0x4000>, + <0xf1204100 0x100>; + reg-names = "bridge", "hub", "core0", "gca"; + interrupts = <0 78 4>, + <0 77 4>; + }; + +...