On monitor hot plug/unplug, update ELD and set/clear SDVO_AUDIO_ENABLE or DP_AUDIO_OUTPUT_ENABLE accordingly. So that the audio driver will receive hot plug events and take action to refresh its device state and ELD contents.
A new callback ->hotplug() is added to struct drm_connector_funcs which will be called immediately after ->detect() knowing that the monitor is either plugged or unplugged.
It's noticed that X may not call ->mode_set() at monitor hot plug, so it's necessary to call drm_edid_to_eld() earlier at ->detect() time rather than in intel_ddc_get_modes(), so that intel_write_eld() can see the new ELD in ->hotplug.
The call sequence on hot plug is (the difference part lies in ->mode_set vs ->hotplug)
- KMS console ->detect drm_edid_to_eld ->mode_set intel_write_eld set SDVO_AUDIO_ENABLE/DP_AUDIO_OUTPUT_ENABLE - X ->detect drm_edid_to_eld ->hotplug intel_write_eld set SDVO_AUDIO_ENABLE/DP_AUDIO_OUTPUT_ENABLE
On hot remove, the call sequence is
->hotplug clear SDVO_AUDIO_ENABLE/DP_AUDIO_OUTPUT_ENABLE
cc: Wang Zhenyu zhenyu.z.wang@intel.com Signed-off-by: Wu Fengguang fengguang.wu@intel.com --- drivers/gpu/drm/drm_crtc_helper.c | 5 ++- drivers/gpu/drm/i915/intel_dp.c | 44 +++++++++++++++++++++------ drivers/gpu/drm/i915/intel_hdmi.c | 31 +++++++++++++++++++ drivers/gpu/drm/i915/intel_modes.c | 2 - include/drm/drm_crtc.h | 1 5 files changed, 71 insertions(+), 12 deletions(-)
--- linux.orig/drivers/gpu/drm/i915/intel_dp.c 2011-11-21 11:26:09.000000000 +0800 +++ linux/drivers/gpu/drm/i915/intel_dp.c 2011-11-21 14:12:21.000000000 +0800 @@ -28,6 +28,7 @@ #include <linux/i2c.h> #include <linux/slab.h> #include <linux/export.h> +#include <drm/drm_edid.h> #include "drmP.h" #include "drm.h" #include "drm_crtc.h" @@ -1970,20 +1971,44 @@ intel_dp_detect(struct drm_connector *co if (status != connector_status_connected) return status;
- if (intel_dp->force_audio) { - intel_dp->has_audio = intel_dp->force_audio > 0; - } else { - edid = intel_dp_get_edid(connector, &intel_dp->adapter); - if (edid) { - intel_dp->has_audio = drm_detect_monitor_audio(edid); - connector->display_info.raw_edid = NULL; - kfree(edid); - } + edid = intel_dp_get_edid(connector, &intel_dp->adapter); + if (edid) { + intel_dp->has_audio = drm_detect_monitor_audio(edid); + drm_edid_to_eld(connector, edid); + connector->display_info.raw_edid = NULL; + kfree(edid); }
+ if (intel_dp->force_audio) + intel_dp->has_audio = intel_dp->force_audio > 0; + return connector_status_connected; }
+static void intel_dp_hotplug(struct drm_connector *connector) +{ + struct intel_dp *intel_dp = intel_attached_dp(connector); + struct drm_device *dev = intel_dp->base.base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_crtc *crtc = intel_dp->base.base.crtc; + + DRM_DEBUG_DRIVER("DisplayPort hotplug status %d crtc %p eld %#x\n", + connector->status, + crtc, + (unsigned int)connector->eld[0]); + + if (connector->status == connector_status_disconnected) { + intel_dp->DP &= ~DP_AUDIO_OUTPUT_ENABLE; + } else if (connector->status == connector_status_connected && crtc) { + intel_write_eld(&intel_dp->base.base, &crtc->mode); + intel_dp->DP |= DP_AUDIO_OUTPUT_ENABLE; + } else { + return; + } + I915_WRITE(intel_dp->output_reg, intel_dp->DP); + POSTING_READ(intel_dp->output_reg); +} + static int intel_dp_get_modes(struct drm_connector *connector) { struct intel_dp *intel_dp = intel_attached_dp(connector); @@ -2143,6 +2168,7 @@ static const struct drm_connector_funcs .detect = intel_dp_detect, .fill_modes = drm_helper_probe_single_connector_modes, .set_property = intel_dp_set_property, + .hotplug = intel_dp_hotplug, .destroy = intel_dp_destroy, };
--- linux.orig/drivers/gpu/drm/i915/intel_hdmi.c 2011-11-21 11:26:09.000000000 +0800 +++ linux/drivers/gpu/drm/i915/intel_hdmi.c 2011-11-21 14:12:26.000000000 +0800 @@ -337,6 +337,7 @@ intel_hdmi_detect(struct drm_connector * status = connector_status_connected; intel_hdmi->has_hdmi_sink = drm_detect_hdmi_monitor(edid); intel_hdmi->has_audio = drm_detect_monitor_audio(edid); + drm_edid_to_eld(connector, edid); } connector->display_info.raw_edid = NULL; kfree(edid); @@ -350,6 +351,35 @@ intel_hdmi_detect(struct drm_connector * return status; }
+static void intel_hdmi_hotplug(struct drm_connector *connector) +{ + struct intel_hdmi *intel_hdmi = intel_attached_hdmi(connector); + struct drm_i915_private *dev_priv = connector->dev->dev_private; + struct drm_crtc *crtc = intel_hdmi->base.base.crtc; + u32 temp; + + DRM_DEBUG_DRIVER("HDMI hotplug status %d crtc %p eld %#x\n", + connector->status, + crtc, + (unsigned int)connector->eld[0]); + + if (connector->status == connector_status_disconnected) { + temp = I915_READ(intel_hdmi->sdvox_reg) & ~SDVO_AUDIO_ENABLE; + } else if (connector->status == connector_status_connected && crtc) { + /* + * It's for X only, which may not call ->mode_set on hot plug. + * KMS console has NULL crtc at this time and will + * call ->mode_set to enable HDMI audio a bit later. + */ + intel_write_eld(&intel_hdmi->base.base, &crtc->mode); + temp = I915_READ(intel_hdmi->sdvox_reg) | SDVO_AUDIO_ENABLE; + } else { + return; + } + I915_WRITE(intel_hdmi->sdvox_reg, temp); + POSTING_READ(intel_hdmi->sdvox_reg); +} + static int intel_hdmi_get_modes(struct drm_connector *connector) { struct intel_hdmi *intel_hdmi = intel_attached_hdmi(connector); @@ -459,6 +489,7 @@ static const struct drm_connector_funcs .detect = intel_hdmi_detect, .fill_modes = drm_helper_probe_single_connector_modes, .set_property = intel_hdmi_set_property, + .hotplug = intel_hdmi_hotplug, .destroy = intel_hdmi_destroy, };
--- linux.orig/drivers/gpu/drm/drm_crtc_helper.c 2011-11-21 11:26:09.000000000 +0800 +++ linux/drivers/gpu/drm/drm_crtc_helper.c 2011-11-21 11:26:14.000000000 +0800 @@ -903,8 +903,11 @@ static void output_poll_execute(struct w connector->base.id, drm_get_connector_name(connector), old_status, connector->status); - if (old_status != connector->status) + if (old_status != connector->status) { changed = true; + connector->funcs->hotplug(connector); + } + }
mutex_unlock(&dev->mode_config.mutex); --- linux.orig/include/drm/drm_crtc.h 2011-11-21 11:26:09.000000000 +0800 +++ linux/include/drm/drm_crtc.h 2011-11-21 11:26:14.000000000 +0800 @@ -419,6 +419,7 @@ struct drm_connector_funcs { int (*fill_modes)(struct drm_connector *connector, uint32_t max_width, uint32_t max_height); int (*set_property)(struct drm_connector *connector, struct drm_property *property, uint64_t val); + void (*hotplug)(struct drm_connector *connector); void (*destroy)(struct drm_connector *connector); void (*force)(struct drm_connector *connector); }; --- linux.orig/drivers/gpu/drm/i915/intel_modes.c 2011-11-21 11:26:09.000000000 +0800 +++ linux/drivers/gpu/drm/i915/intel_modes.c 2011-11-21 11:26:14.000000000 +0800 @@ -26,7 +26,6 @@ #include <linux/slab.h> #include <linux/i2c.h> #include <linux/fb.h> -#include <drm/drm_edid.h> #include "drmP.h" #include "intel_drv.h" #include "i915_drv.h" @@ -75,7 +74,6 @@ int intel_ddc_get_modes(struct drm_conne if (edid) { drm_mode_connector_update_edid_property(connector, edid); ret = drm_add_edid_modes(connector, edid); - drm_edid_to_eld(connector, edid); connector->display_info.raw_edid = NULL; kfree(edid); }