Convert the common GPIO, LED, and PWM backlight bindings to DT schema format.
Given there's only 2 common properties and the descriptions are slightly different, I opted to not create a common backlight schema.
Cc: Lee Jones lee.jones@linaro.org Cc: Daniel Thompson daniel.thompson@linaro.org Cc: Jingoo Han jingoohan1@gmail.com Cc: Sam Ravnborg sam@ravnborg.org Signed-off-by: Rob Herring robh@kernel.org --- v2: - Reformat descriptions - drop default-brightness-level dependency on brightness-levels for led-backlight --- .../leds/backlight/gpio-backlight.txt | 16 --- .../leds/backlight/gpio-backlight.yaml | 41 +++++++ .../bindings/leds/backlight/led-backlight.txt | 28 ----- .../leds/backlight/led-backlight.yaml | 57 ++++++++++ .../bindings/leds/backlight/pwm-backlight.txt | 61 ---------- .../leds/backlight/pwm-backlight.yaml | 104 ++++++++++++++++++ 6 files changed, 202 insertions(+), 105 deletions(-) delete mode 100644 Documentation/devicetree/bindings/leds/backlight/gpio-backlight.txt create mode 100644 Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml delete mode 100644 Documentation/devicetree/bindings/leds/backlight/led-backlight.txt create mode 100644 Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml delete mode 100644 Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt create mode 100644 Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml
diff --git a/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.txt deleted file mode 100644 index 321be6640533..000000000000 --- a/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.txt +++ /dev/null @@ -1,16 +0,0 @@ -gpio-backlight bindings - -Required properties: - - compatible: "gpio-backlight" - - gpios: describes the gpio that is used for enabling/disabling the backlight. - refer to bindings/gpio/gpio.txt for more details. - -Optional properties: - - default-on: enable the backlight at boot. - -Example: - backlight { - compatible = "gpio-backlight"; - gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>; - default-on; - }; diff --git a/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml new file mode 100644 index 000000000000..75cc569b9c55 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/backlight/gpio-backlight.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: gpio-backlight bindings + +maintainers: + - Lee Jones lee.jones@linaro.org + - Daniel Thompson daniel.thompson@linaro.org + - Jingoo Han jingoohan1@gmail.com + +properties: + compatible: + const: gpio-backlight + + gpios: + description: The gpio that is used for enabling/disabling the backlight. + maxItems: 1 + + default-on: + description: enable the backlight at boot. + type: boolean + +required: + - compatible + - gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + backlight { + compatible = "gpio-backlight"; + gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>; + default-on; + }; + +... diff --git a/Documentation/devicetree/bindings/leds/backlight/led-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/led-backlight.txt deleted file mode 100644 index 4c7dfbe7f67a..000000000000 --- a/Documentation/devicetree/bindings/leds/backlight/led-backlight.txt +++ /dev/null @@ -1,28 +0,0 @@ -led-backlight bindings - -This binding is used to describe a basic backlight device made of LEDs. -It can also be used to describe a backlight device controlled by the output of -a LED driver. - -Required properties: - - compatible: "led-backlight" - - leds: a list of LEDs - -Optional properties: - - brightness-levels: Array of distinct brightness levels. The levels must be - in the range accepted by the underlying LED devices. - This is used to translate a backlight brightness level - into a LED brightness level. If it is not provided, the - identity mapping is used. - - - default-brightness-level: The default brightness level. - -Example: - - backlight { - compatible = "led-backlight"; - - leds = <&led1>, <&led2>; - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <6>; - }; diff --git a/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml new file mode 100644 index 000000000000..625082bf3892 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/backlight/led-backlight.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: led-backlight bindings + +maintainers: + - Lee Jones lee.jones@linaro.org + - Daniel Thompson daniel.thompson@linaro.org + - Jingoo Han jingoohan1@gmail.com + +description: + This binding is used to describe a basic backlight device made of LEDs. It + can also be used to describe a backlight device controlled by the output of + a LED driver. + +properties: + compatible: + const: led-backlight + + leds: + description: A list of LED nodes + $ref: /schemas/types.yaml#/definitions/phandle-array + + brightness-levels: + description: + Array of distinct brightness levels. The levels must be in the range + accepted by the underlying LED devices. This is used to translate a + backlight brightness level into a LED brightness level. If it is not + provided, the identity mapping is used. + $ref: /schemas/types.yaml#/definitions/uint32-array + + default-brightness-level: + description: + The default brightness level (index into the array defined by the + "brightness-levels" property). + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - leds + +additionalProperties: false + +examples: + - | + backlight { + compatible = "led-backlight"; + + leds = <&led1>, <&led2>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; + +... diff --git a/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt deleted file mode 100644 index 64fa2fbd98c9..000000000000 --- a/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt +++ /dev/null @@ -1,61 +0,0 @@ -pwm-backlight bindings - -Required properties: - - compatible: "pwm-backlight" - - pwms: OF device-tree PWM specification (see PWM binding[0]) - - power-supply: regulator for supply voltage - -Optional properties: - - pwm-names: a list of names for the PWM devices specified in the - "pwms" property (see PWM binding[0]) - - enable-gpios: contains a single GPIO specifier for the GPIO which enables - and disables the backlight (see GPIO binding[1]) - - post-pwm-on-delay-ms: Delay in ms between setting an initial (non-zero) PWM - and enabling the backlight using GPIO. - - pwm-off-delay-ms: Delay in ms between disabling the backlight using GPIO - and setting PWM value to 0. - - brightness-levels: Array of distinct brightness levels. Typically these - are in the range from 0 to 255, but any range starting at - 0 will do. The actual brightness level (PWM duty cycle) - will be interpolated from these values. 0 means a 0% duty - cycle (darkest/off), while the last value in the array - represents a 100% duty cycle (brightest). - - default-brightness-level: The default brightness level (index into the - array defined by the "brightness-levels" property). - - num-interpolated-steps: Number of interpolated steps between each value - of brightness-levels table. This way a high - resolution pwm duty cycle can be used without - having to list out every possible value in the - brightness-level array. - -[0]: Documentation/devicetree/bindings/pwm/pwm.txt -[1]: Documentation/devicetree/bindings/gpio/gpio.txt - -Example: - - backlight { - compatible = "pwm-backlight"; - pwms = <&pwm 0 5000000>; - - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <6>; - - power-supply = <&vdd_bl_reg>; - enable-gpios = <&gpio 58 0>; - post-pwm-on-delay-ms = <10>; - pwm-off-delay-ms = <10>; - }; - -Example using num-interpolation-steps: - - backlight { - compatible = "pwm-backlight"; - pwms = <&pwm 0 5000000>; - - brightness-levels = <0 2048 4096 8192 16384 65535>; - num-interpolated-steps = <2048>; - default-brightness-level = <4096>; - - power-supply = <&vdd_bl_reg>; - enable-gpios = <&gpio 58 0>; - }; diff --git a/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml new file mode 100644 index 000000000000..fcb8429f3088 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml @@ -0,0 +1,104 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/backlight/pwm-backlight.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: pwm-backlight bindings + +maintainers: + - Lee Jones lee.jones@linaro.org + - Daniel Thompson daniel.thompson@linaro.org + - Jingoo Han jingoohan1@gmail.com + +properties: + compatible: + const: pwm-backlight + + pwms: + maxItems: 1 + + pwm-names: true + + power-supply: + description: regulator for supply voltage + + enable-gpios: + description: + Contains a single GPIO specifier for the GPIO which enables and disables + the backlight. + maxItems: 1 + + post-pwm-on-delay-ms: + description: + Delay in ms between setting an initial (non-zero) PWM and enabling the + backlight using GPIO. + + pwm-off-delay-ms: + description: + Delay in ms between disabling the backlight using GPIO and setting PWM + value to 0. + + brightness-levels: + description: + Array of distinct brightness levels. Typically these are in the range + from 0 to 255, but any range starting at 0 will do. The actual brightness + level (PWM duty cycle) will be interpolated from these values. 0 means a + 0% duty cycle (darkest/off), while the last value in the array represents + a 100% duty cycle (brightest). + $ref: /schemas/types.yaml#/definitions/uint32-array + + default-brightness-level: + description: + The default brightness level (index into the array defined by the + "brightness-levels" property). + $ref: /schemas/types.yaml#/definitions/uint32 + + num-interpolated-steps: + description: + Number of interpolated steps between each value of brightness-levels + table. This way a high resolution pwm duty cycle can be used without + having to list out every possible value in the brightness-level array. + $ref: /schemas/types.yaml#/definitions/uint32 + +dependencies: + default-brightness-level: [brightness-levels] + num-interpolated-steps: [brightness-levels] + +required: + - compatible + - pwms + - power-supply + +additionalProperties: false + +examples: + - | + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 5000000>; + + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + + power-supply = <&vdd_bl_reg>; + enable-gpios = <&gpio 58 0>; + post-pwm-on-delay-ms = <10>; + pwm-off-delay-ms = <10>; + }; + + - | + // Example using num-interpolation-steps: + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 5000000>; + + brightness-levels = <0 2048 4096 8192 16384 65535>; + num-interpolated-steps = <2048>; + default-brightness-level = <4096>; + + power-supply = <&vdd_bl_reg>; + enable-gpios = <&gpio 58 0>; + }; + +...