Sean Paul seanpaul@chromium.org writes:
Instead of duplicating common code from panel-simple, use the panel-common helpers.
Signed-off-by: Sean Paul seanpaul@chromium.org
drivers/gpu/drm/panel/Kconfig | 1 + drivers/gpu/drm/panel/panel-sharp-lq101r1sx01.c | 79 +++++++------------------ 2 files changed, 24 insertions(+), 56 deletions(-)
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index be8590724042..98db78d22a13 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -73,6 +73,7 @@ config DRM_PANEL_SHARP_LQ101R1SX01 depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE
- select DRM_PANEL_COMMON help Say Y here if you want to enable support for Sharp LQ101R1SX01 TFT-LCD modules. The panel has a 2560x1600 resolution and uses
diff --git a/drivers/gpu/drm/panel/panel-sharp-lq101r1sx01.c b/drivers/gpu/drm/panel/panel-sharp-lq101r1sx01.c index 3cce3ca19601..fb2bf67449ab 100644 --- a/drivers/gpu/drm/panel/panel-sharp-lq101r1sx01.c +++ b/drivers/gpu/drm/panel/panel-sharp-lq101r1sx01.c @@ -6,11 +6,8 @@
- published by the Free Software Foundation.
*/
-#include <linux/backlight.h> -#include <linux/gpio/consumer.h> #include <linux/module.h> #include <linux/of.h> -#include <linux/regulator/consumer.h>
#include <drm/drmP.h> #include <drm/drm_crtc.h> @@ -19,17 +16,17 @@
#include <video/mipi_display.h>
+#include "panel-common.h"
struct sharp_panel { struct drm_panel base;
- struct panel_common common;
- /* the datasheet refers to them as DSI-LINK1 and DSI-LINK2 */ struct mipi_dsi_device *link1; struct mipi_dsi_device *link2;
struct backlight_device *backlight;
struct regulator *supply;
bool prepared;
bool enabled;
const struct drm_display_mode *mode;
}; @@ -93,17 +90,7 @@ static int sharp_panel_disable(struct drm_panel *panel) { struct sharp_panel *sharp = to_sharp_panel(panel);
- if (!sharp->enabled)
return 0;- if (sharp->backlight) {
sharp->backlight->props.power = FB_BLANK_POWERDOWN;backlight_update_status(sharp->backlight);- }
- sharp->enabled = false;
- return 0;
- return panel_common_disable(&sharp->common, 0);
}
static int sharp_panel_unprepare(struct drm_panel *panel) @@ -126,11 +113,13 @@ static int sharp_panel_unprepare(struct drm_panel *panel)
msleep(120);
- regulator_disable(sharp->supply);
err = panel_common_unprepare(&sharp->common, 0);
if (err < 0)
dev_err(panel->dev, "failed common unprepare: %d\n", err);sharp->prepared = false;
- return 0;
- return err;
}
static int sharp_setup_symmetrical_split(struct mipi_dsi_device *left, @@ -176,17 +165,15 @@ static int sharp_panel_prepare(struct drm_panel *panel) if (sharp->prepared) return 0;
- err = regulator_enable(sharp->supply);
- if (err < 0)
return err;- /*
*/
- According to the datasheet, the panel needs around 10 ms to fully
- power up. At least another 120 ms is required before exiting sleep
- mode to make sure the panel is ready. Throw in another 20 ms for
- good measure.
- msleep(150);
- err = panel_common_prepare(&sharp->common, 150);
- if (err < 0)
return err;
Aside: I like how 120 + 20 = 150, because always round up your delays :)
err = mipi_dsi_dcs_exit_sleep_mode(sharp->link1); if (err < 0) { @@ -252,7 +239,7 @@ static int sharp_panel_prepare(struct drm_panel *panel) return 0;
poweroff:
- regulator_disable(sharp->supply);
- panel_common_unprepare(&sharp->common, 0); return err;
}
@@ -260,17 +247,7 @@ static int sharp_panel_enable(struct drm_panel *panel) { struct sharp_panel *sharp = to_sharp_panel(panel);
- if (sharp->enabled)
return 0;- if (sharp->backlight) {
sharp->backlight->props.power = FB_BLANK_UNBLANK;backlight_update_status(sharp->backlight);- }
- sharp->enabled = true;
- return 0;
- return panel_common_enable(&sharp->common, 0);
}
static const struct drm_display_mode default_mode = { @@ -324,23 +301,15 @@ MODULE_DEVICE_TABLE(of, sharp_of_match);
static int sharp_panel_add(struct sharp_panel *sharp) {
struct device_node *np; int err;
sharp->mode = &default_mode;
- sharp->prepared = false;
- sharp->supply = devm_regulator_get(&sharp->link1->dev, "power");
- if (IS_ERR(sharp->supply))
return PTR_ERR(sharp->supply);- np = of_parse_phandle(sharp->link1->dev.of_node, "backlight", 0);
- if (np) {
sharp->backlight = of_find_backlight_by_node(np);of_node_put(np);if (!sharp->backlight)return -EPROBE_DEFER;- }
- err = panel_common_init(&sharp->link1->dev, &sharp->common, "supply",
"gpio", "backlight");- if (err < 0)
return err;
Looks like you've incidentally changed the regulator name from "power" to "supply". Seems like it should be a called out in the commit message, if intentional.