On Mon, Jul 9, 2018 at 11:40 AM Sean Paul seanpaul@chromium.org wrote:
Signed-off-by: Sean Paul seanpaul@chromium.org
arch/arm64/boot/dts/qcom/sdm845.dtsi | 194 +++++++++++++++++++++++++++ 1 file changed, 194 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index cdaabeb3c995..339afed856de 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -5,6 +5,8 @@
- Copyright (c) 2018, The Linux Foundation. All rights reserved.
*/
+#include <dt-bindings/clock/qcom,dispcc-sdm845.h> +#include <dt-bindings/clock/qcom,gcc-sdm845.h> #include <dt-bindings/interrupt-controller/arm-gic.h>
/ { @@ -221,6 +223,198 @@ #interrupt-cells = <2>; };
mdss: mdss@ae00000 {compatible = "qcom,dpu-mdss";reg = <0xae00000 0x1000>;reg-names = "mdss_phys";power-domains = <&dispcc 0>;clocks = <&gcc GCC_DISP_AHB_CLK>,<&gcc GCC_DISP_AXI_CLK>,<&dispcc DISP_CC_MDSS_MDP_CLK>;clock-names = "iface", "bus", "core";clock-frequency = <0 0 300000000>;interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;interrupt-controller;#interrupt-cells = <1>;/* iommus = <&apps_iommu 0>; */#address-cells = <1>;#size-cells = <1>;ranges;mdss_mdp: mdp@ae01000 {compatible = "qcom,dpu";
Needs an SoC specific compatible. Did this binding get reviewed?
reg = <0x0ae01000 0x8f000>,<0x0aeb0000 0x2008>;reg-names = "mdp_phys", "vbif_phys";clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,<&dispcc DISP_CC_MDSS_AXI_CLK>,<&dispcc DISP_CC_MDSS_MDP_CLK>,<&dispcc DISP_CC_MDSS_VSYNC_CLK>;clock-names = "iface", "bus", "core", "vsync";clock-frequency = <0 0 300000000 19200000>;
That's abusing clock-frequency which is generally 1 value. Use assigned-clock-rates instead.
interrupt-parent = <&mdss>;interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;ports {#address-cells = <1>;#size-cells = <0>;port@0 {reg = <0>;dpu_intf1_out: endpoint {remote-endpoint = <&dsi0_in>;};};port@1 {reg = <1>;dpu_intf2_out: endpoint {remote-endpoint = <&dsi1_in>;};};};};dsi0: dsi@ae94000 {compatible = "qcom,mdss-dsi-ctrl";
Needs an SoC specific compatible.
reg = <0xae94000 0x400>;reg-names = "dsi_ctrl";interrupt-parent = <&mdss>;interrupts = <4 0>;clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,<&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,<&dispcc DISP_CC_MDSS_PCLK0_CLK>,<&dispcc DISP_CC_MDSS_ESC0_CLK>,<&dispcc DISP_CC_MDSS_AHB_CLK>,<&dispcc DISP_CC_MDSS_AXI_CLK>;clock-names = "byte_clk","byte_intf_clk","pixel_clk","core_clk","iface_clk","bus_clk";
Should have found this in binding review, but the "_clk" part is redundant.
phys = <&dsi0_phy>;phy-names = "dsi-phy";#address-cells = <1>;#size-cells = <0>;ports {#address-cells = <1>;#size-cells = <0>;port@0 {reg = <0>;dsi0_in: endpoint {remote-endpoint = <&dpu_intf1_out>;};};port@1 {reg = <1>;dsi0_out: endpoint {};};};};dsi0_phy: dsi-phy@ae94400 {compatible = "qcom,dsi-phy-10nm";reg = <0xae94400 0x200>,<0xae94a00 0x1e0>,<0xae94600 0x280>;reg-names = "dsi_phy","dsi_pll","dsi_phy_lane";#clock-cells = <1>;#phy-cells = <0>;clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>;clock-names = "iface_clk";};dsi1: dsi@ae96000 {compatible = "qcom,mdss-dsi-ctrl";reg = <0xae96000 0x400>;reg-names = "dsi_ctrl";interrupt-parent = <&mdss>;interrupts = <5 0>;clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,<&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,<&dispcc DISP_CC_MDSS_PCLK1_CLK>,<&dispcc DISP_CC_MDSS_ESC1_CLK>,<&dispcc DISP_CC_MDSS_AHB_CLK>,<&dispcc DISP_CC_MDSS_AXI_CLK>;clock-names = "byte_clk","byte_intf_clk","pixel_clk","core_clk","iface_clk","bus_clk";phys = <&dsi1_phy>;phy-names = "dsi-phy";#address-cells = <1>;#size-cells = <0>;ports {#address-cells = <1>;#size-cells = <0>;port@0 {reg = <0>;dsi1_in: endpoint {remote-endpoint = <&dpu_intf2_out>;};};port@1 {reg = <1>;dsi1_out: endpoint {};};};};dsi1_phy: dsi-phy@ae96400 {compatible = "qcom,dsi-phy-10nm";reg = <0xae96400 0x200>,<0xae96a00 0x10e>,<0xae96600 0x280>;reg-names = "dsi_phy","dsi_pll","dsi_phy_lane";#clock-cells = <1>;#phy-cells = <0>;clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>;clock-names = "iface_clk";};};dispcc: qcom,dispcc@af00000 {compatible = "qcom,sdm845-dispcc";reg = <0xaf00000 0x10000>;#clock-cells = <1>;#reset-cells = <1>;#power-domain-cells = <1>;};spmi_bus: spmi@c440000 { compatible = "qcom,spmi-pmic-arb"; reg = <0xc440000 0x1100>,-- Sean Paul, Software Engineer, Google / Chromium OS