On Wed, Oct 02, 2019 at 09:56:01AM -0700, Matthias Kaehlcke wrote:
pwm_backlight_probe() re-assigns pb->levels for every brightness level. This is not needed and was likely not intended, since neither side of the assignment changes during the loop. Assign the field only once.
Signed-off-by: Matthias Kaehlcke mka@chromium.org
Reviewed-by: Daniel Thompson daniel.thompson@linaro.org
Changes in v2:
- removed curly braces from for loop
drivers/video/backlight/pwm_bl.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c index 746eebc411df..05d3b3802658 100644 --- a/drivers/video/backlight/pwm_bl.c +++ b/drivers/video/backlight/pwm_bl.c @@ -564,18 +564,17 @@ static int pwm_backlight_probe(struct platform_device *pdev) memset(&props, 0, sizeof(struct backlight_properties));
if (data->levels) {
pb->levels = data->levels;- /*
*/
- For the DT case, only when brightness levels is defined
- data->levels is filled. For the non-DT case, data->levels
- can come from platform data, however is not usual.
for (i = 0; i <= data->max_brightness; i++) {
for (i = 0; i <= data->max_brightness; i++) if (data->levels[i] > pb->scale) pb->scale = data->levels[i];
pb->levels = data->levels;}- if (pwm_backlight_is_linear(data)) props.scale = BACKLIGHT_SCALE_LINEAR; else
-- 2.23.0.444.g18eeb5a265-goog
dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel