Hi,
Here's some patches to enable the HDR output in the RPi4/BCM2711 HDMI controller.
Let me know what you think, Maxime
Changes from v3: - Don't dereference the connector->state pointer if kzalloc failed
Changes from v2: - Rebased on current drm-misc-next - Fixed a bug that was dropping the refresh rate when the bpc count was increased
Changes from v1: - Added the coccinelle script to the first patch - Fixed the pixel_rate ramp up
Maxime Ripard (8): drm/vc4: hvs: Align the HVS atomic hooks to the new API drm/vc4: Pass the atomic state to encoder hooks drm/vc4: hdmi: Don't access the connector state in reset if kmalloc fails drm/vc4: hdmi: Create a custom connector state drm/vc4: hdmi: Store pixel frequency in the connector state drm/vc4: hdmi: Use the connector state pixel rate for the PHY drm/vc4: hdmi: Limit the BCM2711 to the max without scrambling drm/vc4: hdmi: Enable 10/12 bpc output
drivers/gpu/drm/vc4/vc4_crtc.c | 22 ++-- drivers/gpu/drm/vc4/vc4_drv.h | 14 +-- drivers/gpu/drm/vc4/vc4_hdmi.c | 151 +++++++++++++++++++++++++--- drivers/gpu/drm/vc4/vc4_hdmi.h | 21 +++- drivers/gpu/drm/vc4/vc4_hdmi_phy.c | 8 +- drivers/gpu/drm/vc4/vc4_hdmi_regs.h | 9 ++ drivers/gpu/drm/vc4/vc4_hvs.c | 8 +- drivers/gpu/drm/vc4/vc4_txp.c | 8 +- 8 files changed, 193 insertions(+), 48 deletions(-)