Hi Ulrich,
Thank you for the patch.
On Tuesday, 14 August 2018 16:50:04 EEST Ulrich Hecht wrote:
Adds LVDS decoder, HDMI encoder and connector for Draak boards.
Signed-off-by: Ulrich Hecht uli+renesas@fpond.eu Reviewed-by: Laurent Pinchart laurent.pinchart@ideasonboard.com
I'm afraid I'll have to revoke that, as it applied to the patch before the addition of the max-clock and min-vrefresh properties. Let's discuss them in replies to patch 05/10 in this series.
arch/arm64/boot/dts/renesas/r8a77995-draak.dts | 84 +++++++++++++++++++++++ 1 file changed, 84 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts index bd5c6fa..157adf9 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts +++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts @@ -24,6 +24,41 @@ stdout-path = "serial0:115200n8"; };
- lvds-decoder {
compatible = "thine,thc63lvd1024";
vcc-supply = <®_3p3v>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
thc63lvd1024_in: endpoint {
remote-endpoint = <&lvds0_out>;
};
};
port@2 {
reg = <2>;
thc63lvd1024_out: endpoint {
remote-endpoint = <&adv7511_in>;
};
};
};
- };
- hdmi-out {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_out: endpoint {
remote-endpoint = <&adv7511_out>;
};
};
- };
- vga { compatible = "vga-connector";
@@ -218,6 +253,43 @@
};
- hdmi@39 {
compatible = "adi,adv7511w";
reg = <0x39>, <0x3f>, <0x38>, <0x3c>;
reg-names = "main", "edid", "packet", "cec";
interrupt-parent = <&gpio1>;
interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
/* Depends on LVDS */
max-clock = <135000000>;
min-vrefresh = <50>;
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
adi,input-style = <1>;
adi,input-justification = "evenly";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
adv7511_in: endpoint {
remote-endpoint = <&thc63lvd1024_out>;
};
};
port@1 {
reg = <1>;
adv7511_out: endpoint {
remote-endpoint = <&hdmi_con_out>;
};
};
};
- };
- hdmi-decoder@4c { compatible = "adi,adv7612"; reg = <0x4c>;
@@ -283,6 +355,18 @@ }; };
+&lvds0 {
- status = "okay";
- ports {
port@1 {
lvds0_out: endpoint {
remote-endpoint = <&thc63lvd1024_in>;
};
};
- };
+};
&ehci0 { status = "okay"; };