2017-01-31 9:23 GMT+01:00 Wladimir J. van der Laan laanwj@gmail.com:
Shaders using sin/cos instructions were not working on GC3000.
The reason for this turns out to be that these chips implement sin/cos in a different way (but using the same opcodes):
Need their input scaled by 1/pi instead of 2/pi.
Output an x and y component, which need to be multiplied to get the result.
tex_amode needs to be set to 1.
Add a new bit to the compiler specs and generate these instructions as necessary.
Signed-Off-By: Wladimir J. van der Laan laanwj@gmail.com
Acked-by: Christian Gmeiner christian.gmeiner@gmail.com
src/gallium/drivers/etnaviv/etnaviv_compiler.c | 37 +++++++++++++++++++++++++- src/gallium/drivers/etnaviv/etnaviv_internal.h | 2 ++ src/gallium/drivers/etnaviv/etnaviv_screen.c | 2 ++ 3 files changed, 40 insertions(+), 1 deletion(-)
diff --git a/src/gallium/drivers/etnaviv/etnaviv_compiler.c b/src/gallium/drivers/etnaviv/etnaviv_compiler.c index 59e1452..c4519e7 100644 --- a/src/gallium/drivers/etnaviv/etnaviv_compiler.c +++ b/src/gallium/drivers/etnaviv/etnaviv_compiler.c @@ -1444,7 +1444,42 @@ static void trans_trig(const struct instr_translater *t, struct etna_compile *c, const struct tgsi_full_instruction *inst, struct etna_inst_src *src) {
- if (c->specs->has_sin_cos_sqrt) {
- if (c->specs->has_new_sin_cos) { /* Alternative SIN/COS */
/* On newer chips alternative SIN/COS instructions are implemented,* which:* - Need their input scaled by 1/pi instead of 2/pi* - Output an x and y component, which need to be multiplied to* get the result*//* TGSI lowering should deal with SCS */assert(inst->Instruction.Opcode != TGSI_OPCODE_SCS);struct etna_native_reg temp = etna_compile_get_inner_temp(c); /* only using .xyz */emit_inst(c, &(struct etna_inst) {.opcode = INST_OPCODE_MUL,.sat = 0,.dst = etna_native_to_dst(temp, INST_COMPS_Z),.src[0] = src[0], /* any swizzling happens here */.src[1] = alloc_imm_f32(c, 1.0f / M_PI),});emit_inst(c, &(struct etna_inst) {.opcode = inst->Instruction.Opcode == TGSI_OPCODE_COS? INST_OPCODE_COS: INST_OPCODE_SIN,.sat = 0,.dst = etna_native_to_dst(temp, INST_COMPS_X | INST_COMPS_Y),.src[2] = etna_native_to_src(temp, SWIZZLE(Z, Z, Z, Z)),.tex = { .amode=1 }, /* Unknown bit needs to be set */});emit_inst(c, &(struct etna_inst) {.opcode = INST_OPCODE_MUL,.sat = inst->Instruction.Saturate,.dst = convert_dst(c, &inst->Dst[0]),.src[0] = etna_native_to_src(temp, SWIZZLE(X, X, X, X)),.src[1] = etna_native_to_src(temp, SWIZZLE(Y, Y, Y, Y)),});- } else if (c->specs->has_sin_cos_sqrt) { /* TGSI lowering should deal with SCS */ assert(inst->Instruction.Opcode != TGSI_OPCODE_SCS);
diff --git a/src/gallium/drivers/etnaviv/etnaviv_internal.h b/src/gallium/drivers/etnaviv/etnaviv_internal.h index f340116..2f09d55 100644 --- a/src/gallium/drivers/etnaviv/etnaviv_internal.h +++ b/src/gallium/drivers/etnaviv/etnaviv_internal.h @@ -70,6 +70,8 @@ struct etna_specs { unsigned has_sign_floor_ceil : 1; /* can use VS_RANGE, PS_RANGE registers*/ unsigned has_shader_range_registers : 1;
- /* has the new sin/cos functions */
- unsigned has_new_sin_cos : 1; /* can use any kind of wrapping mode on npot textures */ unsigned npot_tex_any_wrap; /* number of bits per TS tile */
diff --git a/src/gallium/drivers/etnaviv/etnaviv_screen.c b/src/gallium/drivers/etnaviv/etnaviv_screen.c index 53a31c5..0af7078 100644 --- a/src/gallium/drivers/etnaviv/etnaviv_screen.c +++ b/src/gallium/drivers/etnaviv/etnaviv_screen.c @@ -620,6 +620,8 @@ etna_get_specs(struct etna_screen *screen) screen->model >= 0x1000 || screen->model == 0x880; screen->specs.npot_tex_any_wrap = VIV_FEATURE(screen, chipMinorFeatures1, NON_POWER_OF_TWO);
screen->specs.has_new_sin_cos =
VIV_FEATURE(screen, chipMinorFeatures3, HAS_FAST_TRANSCENDENTALS);if (instruction_count > 256) { /* unified instruction memory? */ screen->specs.vs_offset = 0xC000;
-- 2.7.4
greets -- Christian Gmeiner, MSc
https://www.youtube.com/user/AloryOFFICIAL https://soundcloud.com/christian-gmeiner