Hi Alexandru
On Thu, Sep 24, 2020 at 03:05:06PM -0500, Alexandru Gagniuc wrote:
The sii902x chip family requires IO and core voltages to reach the correct voltage before chip initialization. Add binding for describing the two supplies.
Signed-off-by: Alexandru Gagniuc mr.nuke.me@gmail.com
It is not mandatory but encouraged to convert a binding to DT schema format before updating it. This is in order to reach a point in time where all bindings are in DT Schema format thus allowing much better verification of the DT files.
Sam
Documentation/devicetree/bindings/display/bridge/sii902x.txt | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/bridge/sii902x.txt b/Documentation/devicetree/bindings/display/bridge/sii902x.txt index 0d1db3f9da84..02c21b584741 100644 --- a/Documentation/devicetree/bindings/display/bridge/sii902x.txt +++ b/Documentation/devicetree/bindings/display/bridge/sii902x.txt @@ -8,6 +8,8 @@ Optional properties:
- interrupts: describe the interrupt line used to inform the host about hotplug events.
- reset-gpios: OF device-tree gpio specification for RST_N pin.
- iovcc-supply: I/O Supply Voltage (1.8V or 3.3V)
- cvcc12-supply: Digital Core Supply Voltage (1.2V)
HDMI audio properties:
- #sound-dai-cells: <0> or <1>. <0> if only i2s or spdif pin
@@ -54,6 +56,8 @@ Example: compatible = "sil,sii9022"; reg = <0x39>; reset-gpios = <&pioA 1 0>;
iovcc-supply = <&v3v3_hdmi>;cvcc12-supply = <&v1v2_hdmi>;#sound-dai-cells = <0>; sil,i2s-data-lanes = < 0 1 2 >;
-- 2.25.4
dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel