On Mon, Oct 3, 2016 at 11:58 PM, Peter Rosin peda@axentia.se wrote:
On 2016-10-03 20:46, Rob Herring wrote:
On Tue, Sep 27, 2016 at 12:27:11AM +0200, Peter Rosin wrote:
The Sharp 15" LQ150X1LG11 panel is an XGA TFT LCD panel.
Signed-off-by: Peter Rosin peda@axentia.se
.../bindings/display/panel/sharp,lq150x1lg11.txt | 36 ++++++++++++++++++++++ 1 file changed, 36 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt
diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt b/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt new file mode 100644 index 000000000000..715ff7e332f2 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/sharp,lq150x1lg11.txt @@ -0,0 +1,36 @@ +Sharp 15" LQ150X1LG11 XGA TFT LCD panel
+Required properties: +- compatible: should be "sharp,lq150x1lg11" +- power-supply: regulator to provide the VCC supply voltage (3.3 volts)
Should be named according to the input, so vcc-supply.
Right, I wanted to do that, but the simple-panel bindings has power-supply as required and I desperately wanted to be compatible in order to make use of the simple-panel driver. That driver does require this entry, so I do not see any way around it. Any advice for this situation?
Okay, it's fine given it's a single supply.
Rob