From: Gustavo Padovan gustavo.padovan@collabora.co.uk
We need to get hdisplay and vdisplay in a few places so create a helper to make our job easier.
Note that drm_crtc_check_viewport() and intel_modeset_pipe_config() were previously making adjustments for doublescan modes and vscan > 1 modes, which was incorrect. Using our new helper fixes this mistake.
v2 (by Matt): Use new stereo doubling function (suggested by Ville)
v3 (by Matt): - Add missing kerneldoc (Daniel) - Use drm_mode_copy() (Jani)
v4 (by Matt): - Drop stereo doubling function again; add 'stereo only' flag to drm_mode_set_crtcinfo() instead (Ville)
v5 (by Matt): - Note behavioral change in drm_crtc_check_viewport() and intel_modeset_pipe_config(). (Ander) - Describe new adjustment flags in drm_mode_set_crtcinfo()'s kerneldoc. (Ander)
Cc: dri-devel@lists.freedesktop.org Suggested-by: Ville Syrjälä ville.syrjala@linux.intel.com Signed-off-by: Gustavo Padovan gustavo.padovan@collabora.co.uk Signed-off-by: Matt Roper matthew.d.roper@intel.com --- drivers/gpu/drm/drm_crtc.c | 32 ++++++++++++++++++++++---------- drivers/gpu/drm/drm_modes.c | 26 ++++++++++++++++---------- drivers/gpu/drm/i915/intel_display.c | 6 +++--- include/drm/drm_crtc.h | 2 ++ include/drm/drm_modes.h | 3 +++ 5 files changed, 46 insertions(+), 23 deletions(-)
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index de79283..2985e3f 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -2550,6 +2550,27 @@ int drm_mode_set_config_internal(struct drm_mode_set *set) EXPORT_SYMBOL(drm_mode_set_config_internal);
/** + * drm_crtc_get_hv_timing - Fetches hdisplay/vdisplay for given mode + * @mode: mode to query + * @hdisplay: hdisplay value to fill in + * @vdisplay: vdisplay value to fill in + * + * The vdisplay value will be doubled if the specified mode is a stereo mode of + * the appropriate layout. + */ +void drm_crtc_get_hv_timing(const struct drm_display_mode *mode, + int *hdisplay, int *vdisplay) +{ + struct drm_display_mode adjusted; + + drm_mode_copy(&adjusted, mode); + drm_mode_set_crtcinfo(&adjusted, CRTC_STEREO_DOUBLE_ONLY); + *hdisplay = adjusted.crtc_hdisplay; + *vdisplay = adjusted.crtc_vdisplay; +} +EXPORT_SYMBOL(drm_crtc_get_hv_timing); + +/** * drm_crtc_check_viewport - Checks that a framebuffer is big enough for the * CRTC viewport * @crtc: CRTC that framebuffer will be displayed on @@ -2566,16 +2587,7 @@ int drm_crtc_check_viewport(const struct drm_crtc *crtc, { int hdisplay, vdisplay;
- hdisplay = mode->hdisplay; - vdisplay = mode->vdisplay; - - if (drm_mode_is_stereo(mode)) { - struct drm_display_mode adjusted = *mode; - - drm_mode_set_crtcinfo(&adjusted, CRTC_STEREO_DOUBLE); - hdisplay = adjusted.crtc_hdisplay; - vdisplay = adjusted.crtc_vdisplay; - } + drm_crtc_get_hv_timing(mode, &hdisplay, &vdisplay);
if (crtc->invert_dimensions) swap(hdisplay, vdisplay); diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c index 6d8b941..7689c14 100644 --- a/drivers/gpu/drm/drm_modes.c +++ b/drivers/gpu/drm/drm_modes.c @@ -739,6 +739,8 @@ EXPORT_SYMBOL(drm_mode_vrefresh); * - The CRTC_STEREO_DOUBLE flag can be used to compute the timings for * buffers containing two eyes (only adjust the timings when needed, eg. for * "frame packing" or "side by side full"). + * - The CRTC_NO_DBLSCAN and CRTC_NO_VSCAN flags request that adjustment *not* + * be performed for doublescan and vscan > 1 modes respectively. */ void drm_mode_set_crtcinfo(struct drm_display_mode *p, int adjust_flags) { @@ -765,18 +767,22 @@ void drm_mode_set_crtcinfo(struct drm_display_mode *p, int adjust_flags) } }
- if (p->flags & DRM_MODE_FLAG_DBLSCAN) { - p->crtc_vdisplay *= 2; - p->crtc_vsync_start *= 2; - p->crtc_vsync_end *= 2; - p->crtc_vtotal *= 2; + if (!(adjust_flags & CRTC_NO_DBLSCAN)) { + if (p->flags & DRM_MODE_FLAG_DBLSCAN) { + p->crtc_vdisplay *= 2; + p->crtc_vsync_start *= 2; + p->crtc_vsync_end *= 2; + p->crtc_vtotal *= 2; + } }
- if (p->vscan > 1) { - p->crtc_vdisplay *= p->vscan; - p->crtc_vsync_start *= p->vscan; - p->crtc_vsync_end *= p->vscan; - p->crtc_vtotal *= p->vscan; + if (!(adjust_flags & CRTC_NO_VSCAN)) { + if (p->vscan > 1) { + p->crtc_vdisplay *= p->vscan; + p->crtc_vsync_start *= p->vscan; + p->crtc_vsync_end *= p->vscan; + p->crtc_vtotal *= p->vscan; + } }
if (adjust_flags & CRTC_STEREO_DOUBLE) { diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index c424c36..bda58f9 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -10275,9 +10275,9 @@ intel_modeset_pipe_config(struct drm_crtc *crtc, * computation to clearly distinguish it from the adjusted mode, which * can be changed by the connectors in the below retry loop. */ - drm_mode_set_crtcinfo(&pipe_config->requested_mode, CRTC_STEREO_DOUBLE); - pipe_config->pipe_src_w = pipe_config->requested_mode.crtc_hdisplay; - pipe_config->pipe_src_h = pipe_config->requested_mode.crtc_vdisplay; + drm_crtc_get_hv_timing(&pipe_config->requested_mode, + &pipe_config->pipe_src_w, + &pipe_config->pipe_src_h);
encoder_retry: /* Ensure the port clock defaults are reset when retrying. */ diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index dd2c16e..969da0f 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -1161,6 +1161,8 @@ extern int drm_plane_init(struct drm_device *dev, extern void drm_plane_cleanup(struct drm_plane *plane); extern unsigned int drm_plane_index(struct drm_plane *plane); extern void drm_plane_force_disable(struct drm_plane *plane); +extern void drm_crtc_get_hv_timing(const struct drm_display_mode *mode, + int *hdisplay, int *vdisplay); extern int drm_crtc_check_viewport(const struct drm_crtc *crtc, int x, int y, const struct drm_display_mode *mode, diff --git a/include/drm/drm_modes.h b/include/drm/drm_modes.h index 91d0582..8f17811 100644 --- a/include/drm/drm_modes.h +++ b/include/drm/drm_modes.h @@ -90,6 +90,9 @@ enum drm_mode_status {
#define CRTC_INTERLACE_HALVE_V (1 << 0) /* halve V values for interlacing */ #define CRTC_STEREO_DOUBLE (1 << 1) /* adjust timings for stereo modes */ +#define CRTC_NO_DBLSCAN (1 << 2) /* don't adjust doublescan */ +#define CRTC_NO_VSCAN (1 << 3) /* don't adjust doublescan */ +#define CRTC_STEREO_DOUBLE_ONLY (CRTC_NO_DBLSCAN | CRTC_NO_VSCAN)
#define DRM_MODE_FLAG_3D_MAX DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF