We use __fls() to find the most significant bit. Using that, the loop can be avoided. A second trick is to use the mod(32) behaviour of the rotate instructions on x86 to expand the range of the unsigned int to float conversion to the full 32 bits.
The routine is now exact up to 2^24. Above that, we truncate which is equivalent to rounding towards zero.
Signed-off-by: Steven Fuerst svfuerst@gmail.com --- drivers/gpu/drm/radeon/r600_blit_kms.c | 53 ++++++++++++++------------------ 1 file changed, 23 insertions(+), 30 deletions(-)
diff --git a/drivers/gpu/drm/radeon/r600_blit_kms.c b/drivers/gpu/drm/radeon/r600_blit_kms.c index 2bef854..8307558 100644 --- a/drivers/gpu/drm/radeon/r600_blit_kms.c +++ b/drivers/gpu/drm/radeon/r600_blit_kms.c @@ -455,44 +455,37 @@ set_default_state(struct radeon_device *rdev) radeon_ring_write(ring, sq_stack_resource_mgmt_2); }
-#define I2F_MAX_BITS 15 -#define I2F_MAX_INPUT ((1 << I2F_MAX_BITS) - 1) -#define I2F_SHIFT (24 - I2F_MAX_BITS) +/* 23 bits of float fractional data */ +#define I2F_FRAC_BITS 23 +#define I2F_MASK ((1 << I2F_FRAC_BITS) - 1)
/* * Converts unsigned integer into 32-bit IEEE floating point representation. - * Conversion is not universal and only works for the range from 0 - * to 2^I2F_MAX_BITS-1. Currently we only use it with inputs between - * 0 and 16384 (inclusive), so I2F_MAX_BITS=15 is enough. If necessary, - * I2F_MAX_BITS can be increased, but that will add to the loop iterations - * and slow us down. Conversion is done by shifting the input and counting - * down until the first 1 reaches bit position 23. The resulting counter - * and the shifted input are, respectively, the exponent and the fraction. - * The sign is always zero. + * Will be exact from 0 to 2^24. Above that, we round towards zero + * as the fractional bits will not fit in a float. (It would be better to + * round towards even as the fpu does, but that is slower.) + * This routine depends on the mod(32) behaviour of the rotate instructions + * on x86. */ -static uint32_t i2f(uint32_t input) +static uint32_t i2f(uint32_t x) { - u32 result, i, exponent, fraction; + uint32_t msb, exponent, fraction;
- WARN_ON_ONCE(input > I2F_MAX_INPUT); + /* Zero is special */ + if (!x) return 0;
- if ((input & I2F_MAX_INPUT) == 0) - result = 0; - else { - exponent = 126 + I2F_MAX_BITS; - fraction = (input & I2F_MAX_INPUT) << I2F_SHIFT; + /* Get location of the most significant bit */ + msb = __fls(x);
- for (i = 0; i < I2F_MAX_BITS; i++) { - if (fraction & 0x800000) - break; - else { - fraction = fraction << 1; - exponent = exponent - 1; - } - } - result = exponent << 23 | (fraction & 0x7fffff); - } - return result; + /* + * Use a rotate instead of a shift because that works both leftwards + * and rightwards due to the mod(32) beahviour. This means we don't + * need to check to see if we are above 2^24 or not. + */ + fraction = ror32(x, msb - I2F_FRAC_BITS) & I2F_MASK; + exponent = (127 + msb) << I2F_FRAC_BITS; + + return fraction + exponent; }
int r600_blit_init(struct radeon_device *rdev)