Currently the FRL training mode (Concurrent, Sequential) and training type (Normal, Extended) are not defined properly and are passed as bool values in drm_helpers for pcon configuration for FRL training.
This patch: -Add register masks for Sequential and Normal FRL training options. -Fixes the drm_helpers for FRL Training configuration to use the appropriate masks. -Modifies the calls to the above drm_helpers in i915/intel_dp as per the above change.
v2: Re-used the register masks for these options, instead of enum. (Ville)
Signed-off-by: Ankit Nautiyal ankit.k.nautiyal@intel.com Reviewed-by: Ville Syrjälä ville.syrjala@linux.intel.com --- drivers/gpu/drm/drm_dp_helper.c | 24 ++++++++++++++---------- drivers/gpu/drm/i915/display/intel_dp.c | 10 ++++------ include/drm/drm_dp_helper.h | 6 ++++-- 3 files changed, 22 insertions(+), 18 deletions(-)
diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c index eedbb48815b7..cb2f53e56685 100644 --- a/drivers/gpu/drm/drm_dp_helper.c +++ b/drivers/gpu/drm/drm_dp_helper.c @@ -2635,14 +2635,16 @@ EXPORT_SYMBOL(drm_dp_pcon_is_frl_ready); * drm_dp_pcon_frl_configure_1() - Set HDMI LINK Configuration-Step1 * @aux: DisplayPort AUX channel * @max_frl_gbps: maximum frl bw to be configured between PCON and HDMI sink - * @concurrent_mode: true if concurrent mode or operation is required, - * false otherwise. + * @frl_mode: FRL Training mode, it can be either Concurrent or Sequential. + * In Concurrent Mode, the FRL link bring up can be done along with + * DP Link training. In Sequential mode, the FRL link bring up is done prior to + * the DP Link training. * * Returns 0 if success, else returns negative error code. */
int drm_dp_pcon_frl_configure_1(struct drm_dp_aux *aux, int max_frl_gbps, - bool concurrent_mode) + u8 frl_mode) { int ret; u8 buf; @@ -2651,7 +2653,7 @@ int drm_dp_pcon_frl_configure_1(struct drm_dp_aux *aux, int max_frl_gbps, if (ret < 0) return ret;
- if (concurrent_mode) + if (frl_mode == DP_PCON_ENABLE_CONCURRENT_LINK) buf |= DP_PCON_ENABLE_CONCURRENT_LINK; else buf &= ~DP_PCON_ENABLE_CONCURRENT_LINK; @@ -2694,21 +2696,23 @@ EXPORT_SYMBOL(drm_dp_pcon_frl_configure_1); * drm_dp_pcon_frl_configure_2() - Set HDMI Link configuration Step-2 * @aux: DisplayPort AUX channel * @max_frl_mask : Max FRL BW to be tried by the PCON with HDMI Sink - * @extended_train_mode : true for Extended Mode, false for Normal Mode. - * In Normal mode, the PCON tries each frl bw from the max_frl_mask starting - * from min, and stops when link training is successful. In Extended mode, all - * frl bw selected in the mask are trained by the PCON. + * @frl_type : FRL training type, can be Extended, or Normal. + * In Normal FRL training, the PCON tries each frl bw from the max_frl_mask + * starting from min, and stops when link training is successful. In Extended + * FRL training, all frl bw selected in the mask are trained by the PCON. * * Returns 0 if success, else returns negative error code. */ int drm_dp_pcon_frl_configure_2(struct drm_dp_aux *aux, int max_frl_mask, - bool extended_train_mode) + u8 frl_type) { int ret; u8 buf = max_frl_mask;
- if (extended_train_mode) + if (frl_type == DP_PCON_FRL_LINK_TRAIN_EXTENDED) buf |= DP_PCON_FRL_LINK_TRAIN_EXTENDED; + else + buf &= ~DP_PCON_FRL_LINK_TRAIN_EXTENDED;
ret = drm_dp_dpcd_writeb(aux, DP_PCON_HDMI_LINK_CONFIG_2, buf); if (ret < 0) diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c index 1400c5b44c83..1f6f4d0c8e2d 100644 --- a/drivers/gpu/drm/i915/display/intel_dp.c +++ b/drivers/gpu/drm/i915/display/intel_dp.c @@ -2073,10 +2073,6 @@ static int intel_dp_hdmi_sink_max_frl(struct intel_dp *intel_dp)
static int intel_dp_pcon_start_frl_training(struct intel_dp *intel_dp) { -#define PCON_EXTENDED_TRAIN_MODE (1 > 0) -#define PCON_CONCURRENT_MODE (1 > 0) -#define PCON_SEQUENTIAL_MODE !PCON_CONCURRENT_MODE -#define PCON_NORMAL_TRAIN_MODE !PCON_EXTENDED_TRAIN_MODE #define TIMEOUT_FRL_READY_MS 500 #define TIMEOUT_HDMI_LINK_ACTIVE_MS 1000
@@ -2110,10 +2106,12 @@ static int intel_dp_pcon_start_frl_training(struct intel_dp *intel_dp) return -ETIMEDOUT;
max_frl_bw_mask = intel_dp_pcon_set_frl_mask(max_frl_bw); - ret = drm_dp_pcon_frl_configure_1(&intel_dp->aux, max_frl_bw, PCON_SEQUENTIAL_MODE); + ret = drm_dp_pcon_frl_configure_1(&intel_dp->aux, max_frl_bw, + DP_PCON_ENABLE_SEQUENTIAL_LINK); if (ret < 0) return ret; - ret = drm_dp_pcon_frl_configure_2(&intel_dp->aux, max_frl_bw_mask, PCON_NORMAL_TRAIN_MODE); + ret = drm_dp_pcon_frl_configure_2(&intel_dp->aux, max_frl_bw_mask, + DP_PCON_FRL_LINK_TRAIN_NORMAL); if (ret < 0) return ret; ret = drm_dp_pcon_frl_enable(&intel_dp->aux); diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h index 632ad7faa006..85d728f4aad0 100644 --- a/include/drm/drm_dp_helper.h +++ b/include/drm/drm_dp_helper.h @@ -1176,6 +1176,7 @@ struct drm_device; # define DP_PCON_ENABLE_MAX_BW_48GBPS 6 # define DP_PCON_ENABLE_SOURCE_CTL_MODE (1 << 3) # define DP_PCON_ENABLE_CONCURRENT_LINK (1 << 4) +# define DP_PCON_ENABLE_SEQUENTIAL_LINK (0 << 4) # define DP_PCON_ENABLE_LINK_FRL_MODE (1 << 5) # define DP_PCON_ENABLE_HPD_READY (1 << 6) # define DP_PCON_ENABLE_HDMI_LINK (1 << 7) @@ -1190,6 +1191,7 @@ struct drm_device; # define DP_PCON_FRL_BW_MASK_40GBPS (1 << 4) # define DP_PCON_FRL_BW_MASK_48GBPS (1 << 5) # define DP_PCON_FRL_LINK_TRAIN_EXTENDED (1 << 6) +# define DP_PCON_FRL_LINK_TRAIN_NORMAL (0 << 6)
/* PCON HDMI LINK STATUS */ #define DP_PCON_HDMI_TX_LINK_STATUS 0x303B @@ -2154,9 +2156,9 @@ int drm_dp_get_pcon_max_frl_bw(const u8 dpcd[DP_RECEIVER_CAP_SIZE], int drm_dp_pcon_frl_prepare(struct drm_dp_aux *aux, bool enable_frl_ready_hpd); bool drm_dp_pcon_is_frl_ready(struct drm_dp_aux *aux); int drm_dp_pcon_frl_configure_1(struct drm_dp_aux *aux, int max_frl_gbps, - bool concurrent_mode); + u8 frl_mode); int drm_dp_pcon_frl_configure_2(struct drm_dp_aux *aux, int max_frl_mask, - bool extended_train_mode); + u8 frl_type); int drm_dp_pcon_reset_frl_config(struct drm_dp_aux *aux); int drm_dp_pcon_frl_enable(struct drm_dp_aux *aux);