Convert display/msm/gmu.txt to display/msm/gmu.yaml and remove the old text bindings.
Signed-off-by: Jordan Crouse jcrouse@codeaurora.org ---
.../devicetree/bindings/display/msm/gmu.txt | 116 ------------------ .../devicetree/bindings/display/msm/gmu.yaml | 130 +++++++++++++++++++++ 2 files changed, 130 insertions(+), 116 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/msm/gmu.txt create mode 100644 Documentation/devicetree/bindings/display/msm/gmu.yaml
diff --git a/Documentation/devicetree/bindings/display/msm/gmu.txt b/Documentation/devicetree/bindings/display/msm/gmu.txt deleted file mode 100644 index bf9c7a2..0000000 --- a/Documentation/devicetree/bindings/display/msm/gmu.txt +++ /dev/null @@ -1,116 +0,0 @@ -Qualcomm adreno/snapdragon GMU (Graphics management unit) - -The GMU is a programmable power controller for the GPU. the CPU controls the -GMU which in turn handles power controls for the GPU. - -Required properties: -- compatible: "qcom,adreno-gmu-XYZ.W", "qcom,adreno-gmu" - for example: "qcom,adreno-gmu-630.2", "qcom,adreno-gmu" - Note that you need to list the less specific "qcom,adreno-gmu" - for generic matches and the more specific identifier to identify - the specific device. -- reg: Physical base address and length of the GMU registers. -- reg-names: Matching names for the register regions - * "gmu" - * "gmu_pdc" - * "gmu_pdc_seg" -- interrupts: The interrupt signals from the GMU. -- interrupt-names: Matching names for the interrupts - * "hfi" - * "gmu" -- clocks: phandles to the device clocks -- clock-names: Matching names for the clocks - * "gmu" - * "cxo" - * "axi" - * "mnoc" -- power-domains: should be: - <&clock_gpucc GPU_CX_GDSC> - <&clock_gpucc GPU_GX_GDSC> -- power-domain-names: Matching names for the power domains -- iommus: phandle to the adreno iommu -- operating-points-v2: phandle to the OPP operating points - -Optional properties: -- sram: phandle to the On Chip Memory (OCMEM) that's present on some Snapdragon - SoCs. See Documentation/devicetree/bindings/sram/qcom,ocmem.yaml. - -Example: - -/ { - ... - - gmu: gmu@506a000 { - compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu"; - - reg = <0x506a000 0x30000>, - <0xb280000 0x10000>, - <0xb480000 0x10000>; - reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq"; - - interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hfi", "gmu"; - - clocks = <&gpucc GPU_CC_CX_GMU_CLK>, - <&gpucc GPU_CC_CXO_CLK>, - <&gcc GCC_DDRSS_GPU_AXI_CLK>, - <&gcc GCC_GPU_MEMNOC_GFX_CLK>; - clock-names = "gmu", "cxo", "axi", "memnoc"; - - power-domains = <&gpucc GPU_CX_GDSC>, - <&gpucc GPU_GX_GDSC>; - power-domain-names = "cx", "gx"; - - iommus = <&adreno_smmu 5>; - - operating-points-v2 = <&gmu_opp_table>; - }; -}; - -a3xx example with OCMEM support: - -/ { - ... - - gpu: adreno@fdb00000 { - compatible = "qcom,adreno-330.2", - "qcom,adreno"; - reg = <0xfdb00000 0x10000>; - reg-names = "kgsl_3d0_reg_memory"; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "kgsl_3d0_irq"; - clock-names = "core", - "iface", - "mem_iface"; - clocks = <&mmcc OXILI_GFX3D_CLK>, - <&mmcc OXILICX_AHB_CLK>, - <&mmcc OXILICX_AXI_CLK>; - sram = <&gmu_sram>; - power-domains = <&mmcc OXILICX_GDSC>; - operating-points-v2 = <&gpu_opp_table>; - iommus = <&gpu_iommu 0>; - }; - - ocmem@fdd00000 { - compatible = "qcom,msm8974-ocmem"; - - reg = <0xfdd00000 0x2000>, - <0xfec00000 0x180000>; - reg-names = "ctrl", - "mem"; - - clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, - <&mmcc OCMEMCX_OCMEMNOC_CLK>; - clock-names = "core", - "iface"; - - #address-cells = <1>; - #size-cells = <1>; - - gmu_sram: gmu-sram@0 { - reg = <0x0 0x100000>; - ranges = <0 0 0xfec00000 0x100000>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/display/msm/gmu.yaml b/Documentation/devicetree/bindings/display/msm/gmu.yaml new file mode 100644 index 0000000..776ff92 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/gmu.yaml @@ -0,0 +1,130 @@ +# SPDX-License-Identifier: GPL-2.0-only +# Copyright 2019-2020, The Linux Foundation, All Rights Reserved +%YAML 1.2 +--- + +$id: "http://devicetree.org/schemas/display/msm/gmu.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Devicetree bindings for the GMU attached to certain Adreno GPUs + +maintainers: + - Rob Clark robdclark@gmail.com + +description: | + These bindings describe the Graphics Management Unit (GMU) that is attached + to members of the Adreno A6xx GPU family. The GMU provides on-device power + management and support to improve power efficiency and reduce the load on + the CPU. + +properties: + compatible: + items: + - enum: + - qcom,adreno-gmu-630.2 + - const: qcom,adreno-gmu + + reg: + items: + - description: Core GMU registers + - description: GMU PDC registers + - description: GMU PDC sequence registers + + reg-names: + items: + - const: gmu + - const: gmu_pdc + - const: gmu_pdc_seq + + clocks: + items: + - description: GMU clock + - description: GPU CX clock + - description: GPU AXI clock + - description: GPU MEMNOC clock + + clock-names: + items: + - const: gmu + - const: cxo + - const: axi + - const: memnoc + + interrupts: + items: + - description: GMU HFI interrupt + - description: GMU interrupt + + + interrupt-names: + items: + - const: hfi + - const: gmu + + power-domains: + items: + - description: CX power domain + - description: GX power domain + + power-domain-names: + items: + - const: cx + - const: gx + + iommus: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + Phandle to a IOMMU device and stream ID. Refer to ../../iommu/iommu.txt + for more information. + + operating-points-v2: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the OPP table for the available GMU frequencies. Refer to + ../../opp/opp.txt for more information. + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - interrupts + - interrupt-names + - power-domains + - power-domain-names + - iommus + - operating-points-v2 + +examples: + - | + #include <dt-bindings/clock/qcom,gpucc-sdm845.h> + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + gmu: gmu@506a000 { + compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu"; + + reg = <0x506a000 0x30000>, + <0xb280000 0x10000>, + <0xb480000 0x10000>; + reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq"; + + clocks = <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>; + clock-names = "gmu", "cxo", "axi", "memnoc"; + + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hfi", "gmu"; + + power-domains = <&gpucc GPU_CX_GDSC>, + <&gpucc GPU_GX_GDSC>; + power-domain-names = "cx", "gx"; + + iommus = <&adreno_smmu 5>; + operating-points-v2 = <&gmu_opp_table>; + };