Add driver for Seiko Instruments Inc. 4.3" WVGA (800 x RGB x 480) TFT with Touch-Panel.
Datasheet available at: http://www.glyn.de/data/glyn/media/doc/43wvf1g-0.pdf
Seiko 43WVF1G panel has two power supplies: avdd and dvdd and they require a specific power on/down sequence. For this reason the simple panel driver cannot be used to drive this panel, so create a new one heavily based on simple panel.
Based on initial patch submission from Breno Lima.
Signed-off-by: Marco Franchi marco.franchi@nxp.com --- Changes since v1: -Change supply names to dvdd-supply and avdd-supply .../bindings/display/panel/seiko,43wvf1g.txt | 23 ++ drivers/gpu/drm/panel/Kconfig | 9 + drivers/gpu/drm/panel/Makefile | 1 + drivers/gpu/drm/panel/panel-seiko-43wvf1g.c | 372 +++++++++++++++++++++ 4 files changed, 405 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.txt create mode 100644 drivers/gpu/drm/panel/panel-seiko-43wvf1g.c
diff --git a/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.txt b/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.txt new file mode 100644 index 0000000..aae57ef --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.txt @@ -0,0 +1,23 @@ +Seiko Instruments Inc. 4.3" WVGA (800 x RGB x 480) TFT with Touch-Panel + +Required properties: +- compatible: should be "sii,43wvf1g". +- "dvdd-supply": 3v3 digital regulator. +- "avdd-supply": 5v analog regulator. + +Optional properties: +- backlight: phandle for the backlight control. + +Example: + + panel { + compatible = "sii,43wvf1g"; + backlight = <&backlight_display>; + dvdd-supply = <®_lcd_3v3>; + avdd-supply = <®_lcd_5v>; + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index d84a031..09b0717 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -86,6 +86,15 @@ config DRM_PANEL_SAMSUNG_S6E8AA0 select DRM_MIPI_DSI select VIDEOMODE_HELPERS
+config DRM_PANEL_SEIKO_43WVF1G + tristate "Seiko 43WVF1G panel" + depends on OF + depends on BACKLIGHT_CLASS_DEVICE + select VIDEOMODE_HELPERS + help + Say Y here if you want to enable support for the Seiko + 43WVF1G controller for 800x480 LCD panels + config DRM_PANEL_SHARP_LQ101R1SX01 tristate "Sharp LQ101R1SX01 panel" depends on OF diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile index 9f6610d..183c6bf 100644 --- a/drivers/gpu/drm/panel/Makefile +++ b/drivers/gpu/drm/panel/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00) += panel-panasonic-vvx10f034n00.o obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2) += panel-samsung-s6e3ha2.o obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0) += panel-samsung-s6e8aa0.o +obj-$(CONFIG_DRM_PANEL_SEIKO_43WVF1G) += panel-seiko-43wvf1g.o obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o diff --git a/drivers/gpu/drm/panel/panel-seiko-43wvf1g.c b/drivers/gpu/drm/panel/panel-seiko-43wvf1g.c new file mode 100644 index 0000000..71c09ed --- /dev/null +++ b/drivers/gpu/drm/panel/panel-seiko-43wvf1g.c @@ -0,0 +1,372 @@ +/* + * Copyright (C) 2017 NXP Semiconductors. + * Author: Marco Franchi marco.franchi@nxp.com + * + * Based on Panel Simple driver by Thierry Reding treding@nvidia.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + */ + +#include <linux/backlight.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/regulator/consumer.h> + +#include <drm/drmP.h> +#include <drm/drm_crtc.h> +#include <drm/drm_panel.h> + +#include <video/display_timing.h> +#include <video/videomode.h> + +struct seiko_panel_desc { + const struct drm_display_mode *modes; + unsigned int num_modes; + const struct display_timing *timings; + unsigned int num_timings; + + unsigned int bpc; + + /** + * @width: width (in millimeters) of the panel's active display area + * @height: height (in millimeters) of the panel's active display area + */ + struct { + unsigned int width; + unsigned int height; + } size; + + u32 bus_format; + u32 bus_flags; +}; + +struct seiko_panel { + struct drm_panel base; + bool prepared; + bool enabled; + const struct seiko_panel_desc *desc; + struct backlight_device *backlight; + struct regulator *dvdd; + struct regulator *avdd; +}; + +static inline struct seiko_panel *to_seiko_panel(struct drm_panel *panel) +{ + return container_of(panel, struct seiko_panel, base); +} + +static int seiko_panel_get_fixed_modes(struct seiko_panel *panel) +{ + struct drm_connector *connector = panel->base.connector; + struct drm_device *drm = panel->base.drm; + struct drm_display_mode *mode; + unsigned int i, num = 0; + + if (!panel->desc) + return 0; + + for (i = 0; i < panel->desc->num_timings; i++) { + const struct display_timing *dt = &panel->desc->timings[i]; + struct videomode vm; + + videomode_from_timing(dt, &vm); + mode = drm_mode_create(drm); + if (!mode) { + dev_err(drm->dev, "failed to add mode %ux%u\n", + dt->hactive.typ, dt->vactive.typ); + continue; + } + + drm_display_mode_from_videomode(&vm, mode); + + mode->type |= DRM_MODE_TYPE_DRIVER; + + if (panel->desc->num_timings == 1) + mode->type |= DRM_MODE_TYPE_PREFERRED; + + drm_mode_probed_add(connector, mode); + num++; + } + + for (i = 0; i < panel->desc->num_modes; i++) { + const struct drm_display_mode *m = &panel->desc->modes[i]; + + mode = drm_mode_duplicate(drm, m); + if (!mode) { + dev_err(drm->dev, "failed to add mode %ux%u@%u\n", + m->hdisplay, m->vdisplay, m->vrefresh); + continue; + } + + mode->type |= DRM_MODE_TYPE_DRIVER; + + if (panel->desc->num_modes == 1) + mode->type |= DRM_MODE_TYPE_PREFERRED; + + drm_mode_set_name(mode); + + drm_mode_probed_add(connector, mode); + num++; + } + + connector->display_info.bpc = panel->desc->bpc; + connector->display_info.width_mm = panel->desc->size.width; + connector->display_info.height_mm = panel->desc->size.height; + if (panel->desc->bus_format) + drm_display_info_set_bus_formats(&connector->display_info, + &panel->desc->bus_format, 1); + connector->display_info.bus_flags = panel->desc->bus_flags; + + return num; +} + +static int seiko_panel_disable(struct drm_panel *panel) +{ + struct seiko_panel *p = to_seiko_panel(panel); + + if (!p->enabled) + return 0; + + if (p->backlight) { + p->backlight->props.power = FB_BLANK_POWERDOWN; + p->backlight->props.state |= BL_CORE_FBBLANK; + backlight_update_status(p->backlight); + } + + p->enabled = false; + + return 0; +} + +static int seiko_panel_unprepare(struct drm_panel *panel) +{ + struct seiko_panel *p = to_seiko_panel(panel); + + if (!p->prepared) + return 0; + + regulator_disable(p->avdd); + + /* Add a 100ms delay as per the panel datasheet */ + msleep(100); + + regulator_disable(p->dvdd); + + p->prepared = false; + + return 0; +} + +static int seiko_panel_prepare(struct drm_panel *panel) +{ + struct seiko_panel *p = to_seiko_panel(panel); + int err; + + if (p->prepared) + return 0; + + err = regulator_enable(p->dvdd); + if (err < 0) { + dev_err(panel->dev, "failed to enable dvdd: %d\n", err); + return err; + } + + /* Add a 100ms delay as per the panel datasheet */ + msleep(100); + + err = regulator_enable(p->avdd); + if (err < 0) { + dev_err(panel->dev, "failed to enable avdd: %d\n", err); + goto disable_dvdd; + } + + p->prepared = true; + + return 0; + +disable_dvdd: + regulator_disable(p->dvdd); + return err; +} + +static int seiko_panel_enable(struct drm_panel *panel) +{ + struct seiko_panel *p = to_seiko_panel(panel); + + if (p->enabled) + return 0; + + if (p->backlight) { + p->backlight->props.state &= ~BL_CORE_FBBLANK; + p->backlight->props.power = FB_BLANK_UNBLANK; + backlight_update_status(p->backlight); + } + + p->enabled = true; + + return 0; +} + +static int seiko_panel_get_modes(struct drm_panel *panel) +{ + struct seiko_panel *p = to_seiko_panel(panel); + + /* add hard-coded panel modes */ + return seiko_panel_get_fixed_modes(p); +} + +static int seiko_panel_get_timings(struct drm_panel *panel, + unsigned int num_timings, + struct display_timing *timings) +{ + struct seiko_panel *p = to_seiko_panel(panel); + unsigned int i; + + if (p->desc->num_timings < num_timings) + num_timings = p->desc->num_timings; + + if (timings) + for (i = 0; i < num_timings; i++) + timings[i] = p->desc->timings[i]; + + return p->desc->num_timings; +} + +static const struct drm_panel_funcs seiko_panel_funcs = { + .disable = seiko_panel_disable, + .unprepare = seiko_panel_unprepare, + .prepare = seiko_panel_prepare, + .enable = seiko_panel_enable, + .get_modes = seiko_panel_get_modes, + .get_timings = seiko_panel_get_timings, +}; + +static int seiko_panel_probe(struct device *dev, + const struct seiko_panel_desc *desc) +{ + struct device_node *backlight; + struct seiko_panel *panel; + int err; + + panel = devm_kzalloc(dev, sizeof(*panel), GFP_KERNEL); + if (!panel) + return -ENOMEM; + + panel->enabled = false; + panel->prepared = false; + panel->desc = desc; + + panel->dvdd = devm_regulator_get(dev, "dvdd"); + if (IS_ERR(panel->dvdd)) + return PTR_ERR(panel->dvdd); + + panel->avdd = devm_regulator_get(dev, "avdd"); + if (IS_ERR(panel->avdd)) + return PTR_ERR(panel->avdd); + + backlight = of_parse_phandle(dev->of_node, "backlight", 0); + if (backlight) { + panel->backlight = of_find_backlight_by_node(backlight); + of_node_put(backlight); + + if (!panel->backlight) + return -EPROBE_DEFER; + } + + drm_panel_init(&panel->base); + panel->base.dev = dev; + panel->base.funcs = &seiko_panel_funcs; + + err = drm_panel_add(&panel->base); + if (err < 0) + return err; + + dev_set_drvdata(dev, panel); + + return 0; +} + +static int seiko_panel_remove(struct platform_device *pdev) +{ + struct seiko_panel *panel = dev_get_drvdata(&pdev->dev); + + drm_panel_detach(&panel->base); + drm_panel_remove(&panel->base); + + seiko_panel_disable(&panel->base); + + if (panel->backlight) + put_device(&panel->backlight->dev); + + return 0; +} + +static void seiko_panel_shutdown(struct platform_device *pdev) +{ + struct seiko_panel *panel = dev_get_drvdata(&pdev->dev); + + seiko_panel_disable(&panel->base); +} + +static const struct display_timing seiko_43wvf1g_timing = { + .pixelclock = { 33500000, 33500000, 33500000 }, + .hactive = { 800, 800, 800 }, + .hfront_porch = { 164, 164, 164 }, + .hback_porch = { 89, 89, 89 }, + .hsync_len = { 10, 10, 10 }, + .vactive = { 480, 480, 480 }, + .vfront_porch = { 10, 10, 10 }, + .vback_porch = { 23, 23, 23 }, + .vsync_len = { 10, 10, 10 }, + .flags = DISPLAY_FLAGS_DE_LOW, +}; + +static const struct seiko_panel_desc seiko_43wvf1g = { + .timings = &seiko_43wvf1g_timing, + .num_timings = 1, + .bpc = 8, + .size = { + .width = 93, + .height = 57, + }, + .bus_format = MEDIA_BUS_FMT_RGB888_1X24, + .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_NEGEDGE, +}; + +static const struct of_device_id platform_of_match[] = { + { + .compatible = "sii,43wvf1g", + .data = &seiko_43wvf1g, + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(of, platform_of_match); + +static int seiko_panel_platform_probe(struct platform_device *pdev) +{ + const struct of_device_id *id; + + id = of_match_node(platform_of_match, pdev->dev.of_node); + if (!id) + return -ENODEV; + + return seiko_panel_probe(&pdev->dev, id->data); +} + +static struct platform_driver seiko_panel_platform_driver = { + .driver = { + .name = "seiko_panel", + .of_match_table = platform_of_match, + }, + .probe = seiko_panel_platform_probe, + .remove = seiko_panel_remove, + .shutdown = seiko_panel_shutdown, +}; +module_platform_driver(seiko_panel_platform_driver); + +MODULE_AUTHOR("Marco Franchi <marco.franchi@nxp.com"); +MODULE_DESCRIPTION("Seiko 43WVF1G panel driver"); +MODULE_LICENSE("GPL v2");