Hi Andy,
This patch adds the reg-io-width binding.
Hence the binding patch should come before it.
On 11/11/14 12:53, Andy Yan wrote:
On rockchip rk3288, only word(32-bit) accesses are permitted for hdmi registers. Byte width accesses (writeb, readb) generate an imprecise external abort.
Signed-off-by: Andy Yan andy.yan@rock-chips.com
}
static void hdmi_modb(struct dw_hdmi *hdmi, u8 data, u8 mask, unsigned reg) @@ -1499,6 +1527,23 @@ static int dw_hdmi_bind(struct device *dev, struct device *master, void *data) struct device_node *ddc_node; struct resource *iores; int ret, irq;
- u32 val = 1;
- of_property_read_u32(np, "reg-io-width", &val);
- switch (val) {
- case 4:
hdmi->write = dw_hdmi_writel;hdmi->read = dw_hdmi_readl;break;- case 1:
hdmi->write = dw_hdmi_writeb;hdmi->read = dw_hdmi_readb;break;- default:
dev_err(dev, "reg-io-width must be 1 or 4\n");return -EINVAL;- }
The binding patch says this is an optional property. But here if undefined it returns -EINVAL.
I would keep it optional and default it to byte access.
Regards, ZubairLK