The panel uses the same driver IC and has the same resolution but a slightly different default mode. It seems it can work with the same init sequence.
Signed-off-by: Guido Günther agx@sigxcpu.org Reviewed-by: Linus Walleij linus.walleij@linaro.org --- drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c b/drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c index b057857165b0..30f28ad4df6b 100644 --- a/drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c +++ b/drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c @@ -205,6 +205,21 @@ static const struct drm_display_mode default_mode_mantix = { .height_mm = 130, };
+static const struct drm_display_mode default_mode_ys = { + .hdisplay = 720, + .hsync_start = 720 + 45, + .hsync_end = 720 + 45 + 14, + .htotal = 720 + 45 + 14 + 25, + .vdisplay = 1440, + .vsync_start = 1440 + 175, + .vsync_end = 1440 + 175 + 8, + .vtotal = 1440 + 175 + 8 + 50, + .clock = 85298, + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, + .width_mm = 65, + .height_mm = 130, +}; + static int mantix_get_modes(struct drm_panel *panel, struct drm_connector *connector) { @@ -326,6 +341,7 @@ static int mantix_remove(struct mipi_dsi_device *dsi)
static const struct of_device_id mantix_of_match[] = { { .compatible = "mantix,mlaf057we51-x", .data = &default_mode_mantix }, + { .compatible = "ys,ys57pss36bh5gq", .data = &default_mode_ys }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, mantix_of_match);