Wanted to send out v3 of this patch set improving the EDID probing on the adv7511 used on HiKey.
The first three patches are fixups that are hopefully straight forward, integrating feedback I got from Laurant.
The last two patches try to clean up and resue code to avoid an issue I'm seeing where something is going wrong with the regmap cache state for the ADV7511_REG_EDID_I2C_ADDR (0x43) register which results in i2c_transfer errors if we don't do the regcache_sync/_mark_dirty() calls. I suspect there might be a better solution there, so suggestions will be very welcome.
Thoughts and feedback would be appreciated!
thanks -john
New in v3: * Addressed naming improvements and drm_kms_helper_hotplug_event usage corrections as suggested by Laurent.
Cc: David Airlie airlied@linux.ie Cc: Archit Taneja architt@codeaurora.org Cc: Wolfram Sang wsa+renesas@sang-engineering.com Cc: Lars-Peter Clausen lars@metafoo.de Cc: Laurent Pinchart laurent.pinchart@ideasonboard.com Cc: dri-devel@lists.freedesktop.org
Archit Taneja (1): drm/bridge: adv7511: Enable HPD interrupts to support hotplug and improve monitor detection
John Stultz (4): drm/bridge: adv7511: Use work_struct to defer hotplug handing to out of irq context drm/bridge: adv7511: Switch to using drm_kms_helper_hotplug_event() drm/bridge: adv7511: Rework adv7511_power_on/off() so they can be reused internally drm/bridge: adv7511: Reuse __adv7511_power_on/off() when probing EDID
drivers/gpu/drm/bridge/adv7511/adv7511.h | 2 + drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 62 +++++++++++++++++++--------- 2 files changed, 44 insertions(+), 20 deletions(-)