Hi Vinay.
On Thu, Jul 02, 2020 at 06:06:33PM +0530, Vinay Simha BN wrote:
Signed-off-by: Vinay Simha BN simhavcs@gmail.com
v1: Initial version wast .txt file
v2: From txt to yaml file format
v3:
Andrzej Hajda review comments incorporated dual port lvds implemented
Laurent Pinchart review comments incorporated dsi lanes property removed and it is dynamically picked from the dsi ports VESA/JEIDA format picked from panel-lvds dts
v4:
- Sam Ravnborg review comments incorporated }' is indented properly in examples data-lanes description for single-link and dual-link lvds
.../display/bridge/toshiba,tc358775.yaml | 215 ++++++++++++++++++ 1 file changed, 215 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml new file mode 100644 index 000000000000..9ddd63bee403 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml @@ -0,0 +1,215 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2
One detail that I missed - any specific reason this is not (GPL-2.0-only OR BSD-2-Clause) This is the preferred license for new bindings - as checkpatch also tells you.
Sam
+--- +$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358775.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml#
+title: Toshiba TC358775 DSI to LVDS bridge bindings
+maintainers:
- Vinay Simha BN simhavcs@gmail.com
+description: |
- This binding supports DSI to LVDS bridge TC358775
- MIPI DSI-RX Data 4-lane, CLK 1-lane with data rates up to 800 Mbps/lane.
- Video frame size:
- Up to 1600x1200 24-bit/pixel resolution for single-link LVDS display panel
- limited by 135 MHz LVDS speed
- Up to WUXGA (1920x1200 24-bit pixels) resolution for dual-link LVDS display
- panel, limited by 270 MHz LVDS speed.
+properties:
- compatible:
- const: toshiba,tc358775
- reg:
- maxItems: 1
- description: i2c address of the bridge, 0x0f
- vdd-supply:
- maxItems: 1
- description: 1.2V LVDS Power Supply
- vddio-supply:
- maxItems: 1
- description: 1.8V IO Power Supply
- stby-gpios:
- maxItems: 1
- description: Standby pin, Low active
- reset-gpios:
- maxItems: 1
- description: Hardware reset, Low active
- ports:
- type: object
- description:
A node containing input and output port nodes with endpoint definitionsas documented inDocumentation/devicetree/bindings/media/video-interfaces.txt- properties:
"#address-cells":const: 1"#size-cells":const: 0port@0:type: objectdescription: |DSI Input. The remote endpoint phandle should be areference to a valid mipi_dsi_host device node.port@1:type: objectdescription: |Video port for LVDS output (panel or connector).port@2:type: objectdescription: |Video port for Dual link LVDS output (panel or connector).- required:
- port@0- port@1+required:
- compatible
- reg
- vdd-supply
- vddio-supply
- stby-gpios
- reset-gpios
- ports
+examples:
- |
- #include <dt-bindings/gpio/gpio.h>
- /* For single-link LVDS display panel */
- i2c@78b8000 {
/* On High speed expansion */label = "HS-I2C2";reg = <0x078b8000 0x500>;clock-frequency = <400000>; /* fastmode operation */#address-cells = <1>;#size-cells = <0>;tc_bridge: bridge@f {compatible = "toshiba,tc358775";reg = <0x0f>;vdd-supply = <&pm8916_l2>;vddio-supply = <&pm8916_l6>;stby-gpios = <&msmgpio 99 GPIO_ACTIVE_LOW>;reset-gpios = <&msmgpio 72 GPIO_ACTIVE_LOW>;ports {#address-cells = <1>;#size-cells = <0>;port@0 {reg = <0>;d2l_in_test: endpoint {remote-endpoint = <&dsi0_out>;};};port@1 {reg = <1>;lvds_out: endpoint {remote-endpoint = <&panel_in>;};};};};- };
- dsi@1a98000 {
reg = <0x1a98000 0x25c>;reg-names = "dsi_ctrl";ports {#address-cells = <1>;#size-cells = <0>;port@1 {reg = <1>;dsi0_out: endpoint {remote-endpoint = <&d2l_in_test>;data-lanes = <0 1 2 3>;};};};};
- |
- /* For dual-link LVDS display panel */
- i2c@78b8000 {
/* On High speed expansion */label = "HS-I2C2";reg = <0x078b8000 0x500>;clock-frequency = <400000>; /* fastmode operation */#address-cells = <1>;#size-cells = <0>;tc_bridge_dual: bridge@f {compatible = "toshiba,tc358775";reg = <0x0f>;vdd-supply = <&pm8916_l2>;vddio-supply = <&pm8916_l6>;stby-gpios = <&msmgpio 99 GPIO_ACTIVE_LOW>;reset-gpios = <&msmgpio 72 GPIO_ACTIVE_LOW>;ports {#address-cells = <1>;#size-cells = <0>;port@0 {reg = <0>;d2l_in_dual: endpoint {remote-endpoint = <&dsi0_out_dual>;};};port@1 {reg = <1>;lvds0_out: endpoint {remote-endpoint = <&panel_in0>;};};port@2 {reg = <2>;lvds1_out: endpoint {remote-endpoint = <&panel_in1>;};};};};- };
- dsi@1a98000 {
reg = <0x1a98000 0x25c>;reg-names = "dsi_ctrl";ports {#address-cells = <1>;#size-cells = <0>;port@1 {reg = <1>;dsi0_out_dual: endpoint {remote-endpoint = <&d2l_in_dual>;data-lanes = <0 1 2 3>;};};};};+...
2.17.1
dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel