Commit 4f71d0cb76339 ("drm/dp: add a hw mutex around the transfer functions. (v2)"), renamed the functions drm_dp_aux_register_i2c_bus() and drm_dp_aux_unregister_i2c_bus() to drm_dp_aux_register() and drm_dp_aux_unregister(), respectively. However, a comment referring to the original names was not updated in the DP helper header file. Hence, correct these names.
Signed-off-by: Jon Hunter jonathanh@nvidia.com --- include/drm/drm_dp_helper.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h index 523f04c90dea..2e86f642fc33 100644 --- a/include/drm/drm_dp_helper.h +++ b/include/drm/drm_dp_helper.h @@ -679,9 +679,9 @@ struct drm_dp_aux_msg { * An AUX channel can also be used to transport I2C messages to a sink. A * typical application of that is to access an EDID that's present in the * sink device. The .transfer() function can also be used to execute such - * transactions. The drm_dp_aux_register_i2c_bus() function registers an - * I2C adapter that can be passed to drm_probe_ddc(). Upon removal, drivers - * should call drm_dp_aux_unregister_i2c_bus() to remove the I2C adapter. + * transactions. The drm_dp_aux_register() function registers an I2C + * adapter that can be passed to drm_probe_ddc(). Upon removal, drivers + * should call drm_dp_aux_unregister() to remove the I2C adapter. * The I2C adapter uses long transfers by default; if a partial response is * received, the adapter will drop down to the size given by the partial * response for this transaction only.