- Standardized on "Returns:" Block. - Sprinkle missing kerneldoc over all exported functions and all ioctls. - Add a stern warning that driver's really shouldn't use drm_mode_group_init_legacy_group. - Usual attempt at more consistency. - Add warnings that drm_mode_object_get/put don't do refcounting, despite what the names might lead to believe. - Try to clarify the framebuffer setup/cleanup functions wrt driver private framebuffers - I've fallen recently over this when reviewing i915 fbdev patches. - Align function parameters where the kerneldoc has been updated. - Most of the drm_get_*_name functions aren't thread safe. Add stern warnings where this is the case.
Since a lot of the functions in drm_crtc.c are boilerplate to handle properties and create default sets of them it might be useful to extract all that code into a new file drm_property.c. Especially since properties will be used a lot more in the future.
Signed-off-by: Daniel Vetter daniel.vetter@ffwll.ch --- drivers/gpu/drm/drm_crtc.c | 614 +++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 570 insertions(+), 44 deletions(-)
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index 4c2367181f3d..91d03e3acefb 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -45,7 +45,8 @@ * @dev: drm device * * This function takes all modeset locks, suitable where a more fine-grained - * scheme isn't (yet) implemented. + * scheme isn't (yet) implemented. Locks must be dropped with + * drm_modeset_unlock_all. */ void drm_modeset_lock_all(struct drm_device *dev) { @@ -61,6 +62,8 @@ EXPORT_SYMBOL(drm_modeset_lock_all); /** * drm_modeset_unlock_all - drop all modeset locks * @dev: device + * + * This function drop all modeset locks taken by drm_modeset_lock_all. */ void drm_modeset_unlock_all(struct drm_device *dev) { @@ -76,6 +79,8 @@ EXPORT_SYMBOL(drm_modeset_unlock_all); /** * drm_warn_on_modeset_not_all_locked - check that all modeset locks are locked * @dev: device + * + * Useful as a debug assert. */ void drm_warn_on_modeset_not_all_locked(struct drm_device *dev) { @@ -243,6 +248,15 @@ void drm_connector_ida_destroy(void) ida_destroy(&drm_connector_enum_list[i].ida); }
+/** + * drm_get_encoder_name - return a string for encoder + * @encoder: encoder to compute name of + * + * Note that the buffer used by this function is globally shared and owned by + * the function itself. + * + * FIXME: This isn't really multithreading safe. + */ const char *drm_get_encoder_name(const struct drm_encoder *encoder) { static char buf[32]; @@ -254,6 +268,15 @@ const char *drm_get_encoder_name(const struct drm_encoder *encoder) } EXPORT_SYMBOL(drm_get_encoder_name);
+/** + * drm_get_connector_name - return a string for connector + * @connector: connector to compute name of + * + * Note that the buffer used by this function is globally shared and owned by + * the function itself. + * + * FIXME: This isn't really multithreading safe. + */ const char *drm_get_connector_name(const struct drm_connector *connector) { static char buf[32]; @@ -265,6 +288,13 @@ const char *drm_get_connector_name(const struct drm_connector *connector) } EXPORT_SYMBOL(drm_get_connector_name);
+/** + * drm_get_connector_status_name - return a string for connector status + * @status: connector status to compute name of + * + * In contrast to the other drm_get_*_name functions this one here returns a + * const pointer and hence is threadsafe. + */ const char *drm_get_connector_status_name(enum drm_connector_status status) { if (status == connector_status_connected) @@ -294,6 +324,15 @@ static char printable_char(int c) return isascii(c) && isprint(c) ? c : '?'; }
+/** + * drm_get_format_name - return a string for drm fourcc format + * @format: format to compute name of + * + * Note that the buffer used by this function is globally shared and owned by + * the function itself. + * + * FIXME: This isn't really multithreading safe. + */ const char *drm_get_format_name(uint32_t format) { static char buf[32]; @@ -318,9 +357,11 @@ EXPORT_SYMBOL(drm_get_format_name); * @obj_type: object type * * Create a unique identifier based on @ptr in @dev's identifier space. Used - * for tracking modes, CRTCs and connectors. + * for tracking modes, CRTCs and connectors. Note that despite the _get postfix + * modeset identifiers are _not_ reference counted. Hence don't use this for + * reference counted modeset objects like framebuffers. * - * RETURNS: + * Returns: * New unique (relative to other objects in @dev) integer identifier for the * object. */ @@ -349,7 +390,9 @@ int drm_mode_object_get(struct drm_device *dev, * @dev: DRM device * @object: object to free * - * Free @id from @dev's unique identifier pool. + * Free @id from @dev's unique identifier pool. Note that despite the _get + * postfix modeset identifiers are _not_ reference counted. Hence don't use this + * for reference counted modeset objects like framebuffers. */ void drm_mode_object_put(struct drm_device *dev, struct drm_mode_object *object) @@ -402,7 +445,7 @@ EXPORT_SYMBOL(drm_mode_object_find); * since all the fb attributes are invariant over its lifetime, no further * locking but only correct reference counting is required. * - * RETURNS: + * Returns: * Zero on success, error code on failure. */ int drm_framebuffer_init(struct drm_device *dev, struct drm_framebuffer *fb, @@ -463,7 +506,7 @@ static struct drm_framebuffer *__drm_framebuffer_lookup(struct drm_device *dev, * * If successful, this grabs an additional reference to the framebuffer - * callers need to make sure to eventually unreference the returned framebuffer - * again. + * again, using @drm_framebuffer_unreference. */ struct drm_framebuffer *drm_framebuffer_lookup(struct drm_device *dev, uint32_t id) @@ -496,6 +539,8 @@ EXPORT_SYMBOL(drm_framebuffer_unreference); /** * drm_framebuffer_reference - incr the fb refcnt * @fb: framebuffer + * + * This functions increments the fb's refcount. */ void drm_framebuffer_reference(struct drm_framebuffer *fb) { @@ -552,8 +597,9 @@ EXPORT_SYMBOL(drm_framebuffer_unregister_private); * drm_framebuffer_cleanup - remove a framebuffer object * @fb: framebuffer to remove * - * Cleanup references to a user-created framebuffer. This function is intended - * to be used from the drivers ->destroy callback. + * Cleanup framebuffer. This function is intended to be used from the drivers + * ->destroy callback. It can also be used to clean up driver private + * framebuffers embedded into a larger structure. * * Note that this function does not remove the fb from active usuage - if it is * still used anywhere, hilarity can ensue since userspace could call getfb on @@ -646,7 +692,7 @@ EXPORT_SYMBOL(drm_framebuffer_remove); * * Inits a new object created as base part of a driver crtc object. * - * RETURNS: + * Returns: * Zero on success, error code on failure. */ int drm_crtc_init(struct drm_device *dev, struct drm_crtc *crtc, @@ -746,7 +792,7 @@ static void drm_mode_remove(struct drm_connector *connector, * Initialises a preallocated connector. Connectors should be * subclassed as part of driver connector objects. * - * RETURNS: + * Returns: * Zero on success, error code on failure. */ int drm_connector_init(struct drm_device *dev, @@ -824,6 +870,14 @@ void drm_connector_cleanup(struct drm_connector *connector) } EXPORT_SYMBOL(drm_connector_cleanup);
+/** + * drm_connector_unplug_all - unregister connector userspace interfaces + * @dev: drm device + * + * This function unregisters all connector userspace interfaces in sysfs. Should + * be call when the device is disconnected, e.g. from an usb driver's + * ->disconnect callback. + */ void drm_connector_unplug_all(struct drm_device *dev) { struct drm_connector *connector; @@ -835,6 +889,18 @@ void drm_connector_unplug_all(struct drm_device *dev) } EXPORT_SYMBOL(drm_connector_unplug_all);
+/** + * drm_bridge_init - initialize a drm transcoder/bridge + * @dev: drm device + * @bridge: transcoder/bridge to set up + * @funcs: bridge function table + * + * Initialises a preallocated bridge. Bridges should be + * subclassed as part of driver connector objects. + * + * Returns: + * Zero on success, error code on failure. + */ int drm_bridge_init(struct drm_device *dev, struct drm_bridge *bridge, const struct drm_bridge_funcs *funcs) { @@ -858,6 +924,12 @@ int drm_bridge_init(struct drm_device *dev, struct drm_bridge *bridge, } EXPORT_SYMBOL(drm_bridge_init);
+/** + * drm_bridge_cleanup - cleans up an initialised bridge + * @bridge: bridge to cleanup + * + * Cleans up the bridge but doesn't free the object. + */ void drm_bridge_cleanup(struct drm_bridge *bridge) { struct drm_device *dev = bridge->dev; @@ -870,6 +942,19 @@ void drm_bridge_cleanup(struct drm_bridge *bridge) } EXPORT_SYMBOL(drm_bridge_cleanup);
+/** + * drm_encoder_init - Init a preallocated encoder + * @dev: drm device + * @encoder: the encoder to init + * @funcs: callbacks for this encoder + * @encoder_type: user visible type of the encoder + * + * Initialises a preallocated encoder. Encoder should be + * subclassed as part of driver encoder objects. + * + * Returns: + * Zero on success, error code on failure. + */ int drm_encoder_init(struct drm_device *dev, struct drm_encoder *encoder, const struct drm_encoder_funcs *funcs, @@ -897,6 +982,12 @@ int drm_encoder_init(struct drm_device *dev, } EXPORT_SYMBOL(drm_encoder_init);
+/** + * drm_encoder_cleanup - cleans up an initialised encoder + * @encoder: encoder to cleanup + * + * Cleans up the encoder but doesn't free the object. + */ void drm_encoder_cleanup(struct drm_encoder *encoder) { struct drm_device *dev = encoder->dev; @@ -918,9 +1009,10 @@ EXPORT_SYMBOL(drm_encoder_cleanup); * @format_count: number of elements in @formats * @priv: plane is private (hidden from userspace)? * - * Inits a new object created as base part of a driver plane object. + * Inits a preallocate plane object created as base part of a driver plane + * object. * - * RETURNS: + * Returns: * Zero on success, error code on failure. */ int drm_plane_init(struct drm_device *dev, struct drm_plane *plane, @@ -1224,6 +1316,10 @@ static int drm_mode_group_init(struct drm_device *dev, struct drm_mode_group *gr return 0; }
+/* + * NOTE: Driver's shouldn't ever call drm_mode_group_init_legacy_group - it is + * the drm core's responsibility to set up mode control groups. + */ int drm_mode_group_init_legacy_group(struct drm_device *dev, struct drm_mode_group *group) { @@ -1300,7 +1396,7 @@ static void drm_crtc_convert_to_umode(struct drm_mode_modeinfo *out, * Convert a drm_mode_modeinfo into a drm_display_mode structure to return to * the caller. * - * RETURNS: + * Returns: * Zero on success, errno on failure. */ static int drm_crtc_convert_umode(struct drm_display_mode *out, @@ -1343,7 +1439,7 @@ static int drm_crtc_convert_umode(struct drm_display_mode *out, * * Called by the user via ioctl. * - * RETURNS: + * Returns: * Zero on success, errno on failure. */ int drm_mode_getresources(struct drm_device *dev, void *data, @@ -1528,7 +1624,7 @@ out: * * Called by the user via ioctl. * - * RETURNS: + * Returns: * Zero on success, errno on failure. */ int drm_mode_getcrtc(struct drm_device *dev, @@ -1597,7 +1693,7 @@ static bool drm_mode_expose_to_userspace(const struct drm_display_mode *mode, * * Called by the user via ioctl. * - * RETURNS: + * Returns: * Zero on success, errno on failure. */ int drm_mode_getconnector(struct drm_device *dev, void *data, @@ -1732,6 +1828,19 @@ out: return ret; }
+/** + * drm_mode_getencoder - get encoder configuration + * @dev: drm device for the ioctl + * @data: data pointer for the ioctl + * @file_priv: drm file for the ioctl call + * + * Construct a encoder configuration structure to return to the user. + * + * Called by the user via ioctl. + * + * Returns: + * Zero on success, errno on failure. + */ int drm_mode_getencoder(struct drm_device *dev, void *data, struct drm_file *file_priv) { @@ -1767,15 +1876,20 @@ out: }
/** - * drm_mode_getplane_res - get plane info + * drm_mode_getplane_res - enumerate all plane resources * @dev: DRM device * @data: ioctl data * @file_priv: DRM file info * - * Return an plane count and set of IDs. + * Construct a list of plane ids to return to the user. + * + * Called by the user via ioctl. + * + * Returns: + * Zero on success, errno on failure. */ int drm_mode_getplane_res(struct drm_device *dev, void *data, - struct drm_file *file_priv) + struct drm_file *file_priv) { struct drm_mode_get_plane_res *plane_resp = data; struct drm_mode_config *config; @@ -1813,16 +1927,20 @@ out: }
/** - * drm_mode_getplane - get plane info + * drm_mode_getplane - get plane configuration * @dev: DRM device * @data: ioctl data * @file_priv: DRM file info * - * Return plane info, including formats supported, gamma size, any - * current fb, etc. + * Construct a plane configuration structure to return to the user. + * + * Called by the user via ioctl. + * + * Returns: + * Zero on success, errno on failure. */ int drm_mode_getplane(struct drm_device *dev, void *data, - struct drm_file *file_priv) + struct drm_file *file_priv) { struct drm_mode_get_plane *plane_resp = data; struct drm_mode_object *obj; @@ -1878,16 +1996,19 @@ out: }
/** - * drm_mode_setplane - set up or tear down an plane + * drm_mode_setplane - configure a plane's configuration * @dev: DRM device * @data: ioctl data* * @file_priv: DRM file info * - * Set plane info, including placement, fb, scaling, and other factors. + * Set plane configuration, including placement, fb, scaling, and other factors. * Or pass a NULL fb to disable. + * + * Returns: + * Zero on success, errno on failure. */ int drm_mode_setplane(struct drm_device *dev, void *data, - struct drm_file *file_priv) + struct drm_file *file_priv) { struct drm_mode_set_plane *plane_req = data; struct drm_mode_object *obj; @@ -2017,6 +2138,9 @@ out: * * This is a little helper to wrap internal calls to the ->set_config driver * interface. The only thing it adds is correct refcounting dance. + * + * Returns: + * Zero on success, errno on failure. */ int drm_mode_set_config_internal(struct drm_mode_set *set) { @@ -2101,7 +2225,7 @@ static int drm_crtc_check_viewport(const struct drm_crtc *crtc, * * Called by the user via ioctl. * - * RETURNS: + * Returns: * Zero on success, errno on failure. */ int drm_mode_setcrtc(struct drm_device *dev, void *data, @@ -2303,8 +2427,23 @@ out: return ret;
} + + +/** + * drm_mode_cursor_ioctl - set CRTC's cursor configuration + * @dev: drm device for the ioctl + * @data: data pointer for the ioctl + * @file_priv: drm file for the ioctl call + * + * Set the cursor configuration based on user request. + * + * Called by the user via ioctl. + * + * Returns: + * Zero on success, errno on failure. + */ int drm_mode_cursor_ioctl(struct drm_device *dev, - void *data, struct drm_file *file_priv) + void *data, struct drm_file *file_priv) { struct drm_mode_cursor *req = data; struct drm_mode_cursor2 new_req; @@ -2315,6 +2454,21 @@ int drm_mode_cursor_ioctl(struct drm_device *dev, return drm_mode_cursor_common(dev, &new_req, file_priv); }
+/** + * drm_mode_cursor2_ioctl - set CRTC's cursor configuration + * @dev: drm device for the ioctl + * @data: data pointer for the ioctl + * @file_priv: drm file for the ioctl call + * + * Set the cursor configuration based on user request. This implements the 2nd + * version of the cursor ioctl, which allows userspace to additionally specify + * the hotspot of the pointer. + * + * Called by the user via ioctl. + * + * Returns: + * Zero on success, errno on failure. + */ int drm_mode_cursor2_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { @@ -2322,7 +2476,14 @@ int drm_mode_cursor2_ioctl(struct drm_device *dev, return drm_mode_cursor_common(dev, req, file_priv); }
-/* Original addfb only supported RGB formats, so figure out which one */ +/** + * drm_mode_legacy_fb_format - compute drm fourcc code from legacy description + * @bpp: bits per pixels + * @depth: bit depth per pixel + * + * Computes a drm fourcc pixel format code for the given @bpp/@depth values. + * Useful in fbdev emulation code, since that deals in those values. + */ uint32_t drm_mode_legacy_fb_format(uint32_t bpp, uint32_t depth) { uint32_t fmt; @@ -2364,11 +2525,12 @@ EXPORT_SYMBOL(drm_mode_legacy_fb_format); * @data: data pointer for the ioctl * @file_priv: drm file for the ioctl call * - * Add a new FB to the specified CRTC, given a user request. + * Add a new FB to the specified CRTC, given a user request. This is the + * original addfb ioclt which only supported RGB formats. * * Called by the user via ioctl. * - * RETURNS: + * Returns: * Zero on success, errno on failure. */ int drm_mode_addfb(struct drm_device *dev, @@ -2541,11 +2703,13 @@ static int framebuffer_check(const struct drm_mode_fb_cmd2 *r) * @data: data pointer for the ioctl * @file_priv: drm file for the ioctl call * - * Add a new FB to the specified CRTC, given a user request with format. + * Add a new FB to the specified CRTC, given a user request with format. This is + * the 2nd version of the addfb ioctl, which supports multi-planar framebuffers + * and uses fourcc codes as pixel format specifiers. * * Called by the user via ioctl. * - * RETURNS: + * Returns: * Zero on success, errno on failure. */ int drm_mode_addfb2(struct drm_device *dev, @@ -2605,7 +2769,7 @@ int drm_mode_addfb2(struct drm_device *dev, * * Called by the user via ioctl. * - * RETURNS: + * Returns: * Zero on success, errno on failure. */ int drm_mode_rmfb(struct drm_device *dev, @@ -2659,7 +2823,7 @@ fail_lookup: * * Called by the user via ioctl. * - * RETURNS: + * Returns: * Zero on success, errno on failure. */ int drm_mode_getfb(struct drm_device *dev, @@ -2703,6 +2867,25 @@ int drm_mode_getfb(struct drm_device *dev, return ret; }
+/** + * drm_mode_dirtyfb_ioctl - flush frontbuffer rendering on an FB + * @dev: drm device for the ioctl + * @data: data pointer for the ioctl + * @file_priv: drm file for the ioctl call + * + * Lookup the FB and flush out the damaged area supplied by userspace as a clip + * rectangle list. Generic userspace which does frontbuffer rendering must call + * this ioctl to flush out the changes on manual-update display outputs, e.g. + * usb display-link, mipi manual update panels or edp panel self refresh modes. + * + * Modesetting drivers which always update the frontbuffer do not need to + * implement the corresponding ->dirty framebuffer callback. + * + * Called by the user via ioctl. + * + * Returns: + * Zero on success, errno on failure. + */ int drm_mode_dirtyfb_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { @@ -2780,7 +2963,7 @@ out_err1: * * Called by the user via ioctl. * - * RETURNS: + * Returns: * Zero on success, errno on failure. */ void drm_fb_release(struct drm_file *priv) @@ -2804,6 +2987,20 @@ void drm_fb_release(struct drm_file *priv) mutex_unlock(&priv->fbs_lock); }
+/** + * drm_property_create - create a new property type + * @dev: drm device + * @flags: flags specifying the property type + * @name: name of the property + * @num_values: number of pre-defined values + * + * This creates a new generic drm property which can then be attached to a drm + * object with drm_object_attach_property. The returned property object must be + * freed with drm_property_destroy. + * + * Returns: + * A pointer to the newly created property on success, NULL on failure. + */ struct drm_property *drm_property_create(struct drm_device *dev, int flags, const char *name, int num_values) { @@ -2842,6 +3039,24 @@ fail: } EXPORT_SYMBOL(drm_property_create);
+/** + * drm_property_create - create a new enumeration property type + * @dev: drm device + * @flags: flags specifying the property type + * @name: name of the property + * @props: enumeration lists with property values + * @num_values: number of pre-defined values + * + * This creates a new generic drm property which can then be attached to a drm + * object with drm_object_attach_property. The returned property object must be + * freed with drm_property_destroy. + * + * Userspace is only allowed to set one of the predefined values for enumeration + * properties. + * + * Returns: + * A pointer to the newly created property on success, NULL on failure. + */ struct drm_property *drm_property_create_enum(struct drm_device *dev, int flags, const char *name, const struct drm_prop_enum_list *props, @@ -2870,6 +3085,24 @@ struct drm_property *drm_property_create_enum(struct drm_device *dev, int flags, } EXPORT_SYMBOL(drm_property_create_enum);
+/** + * drm_property_create - create a new bitmask property type + * @dev: drm device + * @flags: flags specifying the property type + * @name: name of the property + * @props: enumeration lists with property bitflags + * @num_values: number of pre-defined values + * + * This creates a new generic drm property which can then be attached to a drm + * object with drm_object_attach_property. The returned property object must be + * freed with drm_property_destroy. + * + * Compared to plain enumeration properties userspace is allowed to set any + * or'ed together combination of the predefined property bitflag values + * + * Returns: + * A pointer to the newly created property on success, NULL on failure. + */ struct drm_property *drm_property_create_bitmask(struct drm_device *dev, int flags, const char *name, const struct drm_prop_enum_list *props, @@ -2898,6 +3131,24 @@ struct drm_property *drm_property_create_bitmask(struct drm_device *dev, } EXPORT_SYMBOL(drm_property_create_bitmask);
+/** + * drm_property_create - create a new ranged property type + * @dev: drm device + * @flags: flags specifying the property type + * @name: name of the property + * @min: minimum value of the property + * @max: maximum value of the property + * + * This creates a new generic drm property which can then be attached to a drm + * object with drm_object_attach_property. The returned property object must be + * freed with drm_property_destroy. + * + * Userspace is allowed to set any interger value in the (min, max) range + * inclusive. + * + * Returns: + * A pointer to the newly created property on success, NULL on failure. + */ struct drm_property *drm_property_create_range(struct drm_device *dev, int flags, const char *name, uint64_t min, uint64_t max) @@ -2917,6 +3168,21 @@ struct drm_property *drm_property_create_range(struct drm_device *dev, int flags } EXPORT_SYMBOL(drm_property_create_range);
+/** + * drm_property_add_enum - add a possible value to an enumeration property + * @property: enumeration property to change + * @index: index of the new enumeration + * @value: value of the new enumeration + * @name: symbolic name of the new enumeration + * + * This functions adds enumerations to a property. + * + * It's use is deprecated, drivers should use one of the more specific helpers + * to directly create the property with all enumerations already attached. + * + * Returns: + * Zero on success, error code on failure. + */ int drm_property_add_enum(struct drm_property *property, int index, uint64_t value, const char *name) { @@ -2956,6 +3222,14 @@ int drm_property_add_enum(struct drm_property *property, int index, } EXPORT_SYMBOL(drm_property_add_enum);
+/** + * drm_property_destroy - destroy a drm property + * @dev: drm device + * @property: property to destry + * + * This function frees a property including any attached resources like + * enumeration values. + */ void drm_property_destroy(struct drm_device *dev, struct drm_property *property) { struct drm_property_enum *prop_enum, *pt; @@ -2973,6 +3247,16 @@ void drm_property_destroy(struct drm_device *dev, struct drm_property *property) } EXPORT_SYMBOL(drm_property_destroy);
+/** + * drm_object_attach_property - attach a property to a modeset object + * @obj: drm modeset object + * @property: property to attach + * @init_val: initial value of the property + * + * This attaches the given property to the modeset object with the given initial + * value. Currently this function cannot fail since the properties are stored in + * a statically sized array. + */ void drm_object_attach_property(struct drm_mode_object *obj, struct drm_property *property, uint64_t init_val) @@ -2993,6 +3277,19 @@ void drm_object_attach_property(struct drm_mode_object *obj, } EXPORT_SYMBOL(drm_object_attach_property);
+/** + * drm_object_property_set_value - set the value of a property + * @obj: drm mode object to set property value for + * @property: property to set + * @val: value the property should be set to + * + * This functions sets a given property on a given object. This function only + * changes the software state of the property, it does not call into the + * driver's ->set_property callback. + * + * Returns: + * Zero on success, error code on failure. + */ int drm_object_property_set_value(struct drm_mode_object *obj, struct drm_property *property, uint64_t val) { @@ -3009,6 +3306,20 @@ int drm_object_property_set_value(struct drm_mode_object *obj, } EXPORT_SYMBOL(drm_object_property_set_value);
+/** + * drm_object_property_get_value - retrieve the value of a property + * @obj: drm mode object to get property value from + * @property: property to retrieve + * @val: storage for the property value + * + * This function retrieves the softare state of the given property for the given + * property. Since there is no driver callback to retrieve the current property + * value this might be out of sync with the hardware, depending upon the driver + * and property. + * + * Returns: + * Zero on success, error code on failure. + */ int drm_object_property_get_value(struct drm_mode_object *obj, struct drm_property *property, uint64_t *val) { @@ -3025,6 +3336,19 @@ int drm_object_property_get_value(struct drm_mode_object *obj, } EXPORT_SYMBOL(drm_object_property_get_value);
+/** + * drm_mode_getproperty_ioctl - get the current value of a connector's property + * @dev: DRM device + * @data: ioctl data + * @file_priv: DRM file info + * + * This function retrieves the current value for an connectors's property. + * + * Called by the user via ioctl. + * + * Returns: + * Zero on success, errno on failure. + */ int drm_mode_getproperty_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { @@ -3163,6 +3487,20 @@ static void drm_property_destroy_blob(struct drm_device *dev, kfree(blob); }
+/** + * drm_mode_getblob_ioctl - get the contents of a blob property value + * @dev: DRM device + * @data: ioctl data + * @file_priv: DRM file info + * + * This function retrieves the contents of a blob property. The value stored in + * an object's blob property is just a normal modeset object id. + * + * Called by the user via ioctl. + * + * Returns: + * Zero on success, errno on failure. + */ int drm_mode_getblob_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { @@ -3197,6 +3535,17 @@ done: return ret; }
+/** + * drm_mode_connector_update_edid_property - update the edid property of a connector + * @connector: drm connector + * @edid: new value of the edid property + * + * This function creates a new blob modeset object and assigns its id to the + * connector's edid property. + * + * Returns: + * Zero on success, errno on failure. + */ int drm_mode_connector_update_edid_property(struct drm_connector *connector, struct edid *edid) { @@ -3254,6 +3603,20 @@ static bool drm_property_change_is_valid(struct drm_property *property, } }
+/** + * drm_mode_connector_property_set_ioctl - set the current value of a connector property + * @dev: DRM device + * @data: ioctl data + * @file_priv: DRM file info + * + * This function sets the current value for a connectors's property. It also + * calls into a driver's ->set_property callback to update the hardware state + * + * Called by the user via ioctl. + * + * Returns: + * Zero on success, errno on failure. + */ int drm_mode_connector_property_set_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { @@ -3320,6 +3683,21 @@ static int drm_mode_plane_set_obj_prop(struct drm_mode_object *obj, return ret; }
+/** + * drm_mode_getproperty_ioctl - get the current value of a object's property + * @dev: DRM device + * @data: ioctl data + * @file_priv: DRM file info + * + * This function retrieves the current value for an object's property. Compared + * to the connector specific ioctl this one is extended to also work on crtc and + * plane objects. + * + * Called by the user via ioctl. + * + * Returns: + * Zero on success, errno on failure. + */ int drm_mode_obj_get_properties_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { @@ -3376,6 +3754,22 @@ out: return ret; }
+/** + * drm_mode_obj_set_property_ioctl - set the current value of an object's property + * @dev: DRM device + * @data: ioctl data + * @file_priv: DRM file info + * + * This function sets the current value for an object's property. It also calls + * into a driver's ->set_property callback to update the hardware state. + * Compared to the connector specific ioctl this one is extended to also work on + * crtc and plane objects. + * + * Called by the user via ioctl. + * + * Returns: + * Zero on success, errno on failure. + */ int drm_mode_obj_set_property_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { @@ -3435,6 +3829,18 @@ out: return ret; }
+/** + * drm_mode_connector_attach_encoder - attach a connector to an encoder + * @connector: connector to attach + * @encoder: encoder to attach @connector to + * + * This function links up a connector to an encoder. Note that the routing + * restrictions between encoders and crtcs are exposed to userspace through the + * possible_clones and possible_crtcs bitmasks. + * + * Returns: + * Zero on success, errno on failure. + */ int drm_mode_connector_attach_encoder(struct drm_connector *connector, struct drm_encoder *encoder) { @@ -3450,8 +3856,20 @@ int drm_mode_connector_attach_encoder(struct drm_connector *connector, } EXPORT_SYMBOL(drm_mode_connector_attach_encoder);
+/** + * drm_mode_crtc_set_gamma_size - set the gamma table size + * @crtc: CRTC to set the gamma table size for + * @gamma_size: size of the gamma table + * + * Drivers which support gamma tables should set this to the supported gamma + * table size when initializing the CRTC. Currently the drm core only supports a + * fixed gamma table size. + * + * Returns: + * Zero on success, errno on failure. + */ int drm_mode_crtc_set_gamma_size(struct drm_crtc *crtc, - int gamma_size) + int gamma_size) { crtc->gamma_size = gamma_size;
@@ -3465,6 +3883,20 @@ int drm_mode_crtc_set_gamma_size(struct drm_crtc *crtc, } EXPORT_SYMBOL(drm_mode_crtc_set_gamma_size);
+/** + * drm_mode_gamma_set_ioctl - set the gamma table + * @dev: DRM device + * @data: ioctl data + * @file_priv: DRM file info + * + * Set the gamma table of a CRTC to the one passed in by the user. Userspace can + * inquire the required gamma table size through drm_mode_gamma_get_ioctl. + * + * Called by the user via ioctl. + * + * Returns: + * Zero on success, errno on failure. + */ int drm_mode_gamma_set_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { @@ -3524,6 +3956,21 @@ out:
}
+/** + * drm_mode_gamma_get_ioctl - get the gamma table + * @dev: DRM device + * @data: ioctl data + * @file_priv: DRM file info + * + * Copy the current gamma table into the storage provided. This also provides + * the gamma table size the driver expects, which can be used to size the + * allocated storage. + * + * Called by the user via ioctl. + * + * Returns: + * Zero on success, errno on failure. + */ int drm_mode_gamma_get_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { @@ -3574,6 +4021,24 @@ out: return ret; }
+/** + * drm_mode_page_flip_ioctl - schedule an asynchronous fb update + * @dev: DRM device + * @data: ioctl data + * @file_priv: DRM file info + * + * This schedules an asynchronous update on a given CRTC, called page flip. + * Optionally a drm event is generated to signal the completion of the event. + * Generic drivers cannot assume that a pageflip with changed framebuffer + * properties (including driver specific metadata like tiling layout) will work, + * but some drivers support e.g. pixel format changes through the pageflip + * ioctl. + * + * Called by the user via ioctl. + * + * Returns: + * Zero on success, errno on failure. + */ int drm_mode_page_flip_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { @@ -3686,6 +4151,14 @@ out: return ret; }
+/** + * drm_mode_config_reset - call ->reset callbacks + * @dev: drm device + * + * This functions calls all the crtc's, encoder's and connector's ->reset + * callback. Drivers can use this in e.g. their driver load or resume code to + * reset hardware and software state. + */ void drm_mode_config_reset(struct drm_device *dev) { struct drm_crtc *crtc; @@ -3709,6 +4182,25 @@ void drm_mode_config_reset(struct drm_device *dev) } EXPORT_SYMBOL(drm_mode_config_reset);
+/** + * drm_mode_create_dumb_ioctl - create a dumb backing storage buffer + * @dev: DRM device + * @data: ioctl data + * @file_priv: DRM file info + * + * This creates a new dumb buffer in the driver's backing storage manager (GEM, + * TTM or something else entirely) and returns the resulting buffer handle. This + * handle can then be wrapped up into a framebuffer modeset object. + * + * Note that userspace is not allowed to use such objects for render + * acceleration - drivers must create their own private ioctls for such a use + * case. + * + * Called by the user via ioctl. + * + * Returns: + * Zero on success, errno on failure. + */ int drm_mode_create_dumb_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { @@ -3719,6 +4211,20 @@ int drm_mode_create_dumb_ioctl(struct drm_device *dev, return dev->driver->dumb_create(file_priv, dev, args); }
+/** + * drm_mode_mmap_dumb_ioctl - create an mmap offset for a dumb backing storage buffer + * @dev: DRM device + * @data: ioctl data + * @file_priv: DRM file info + * + * Allocate an offset in the drm device node's address space to be able to + * memory map a dumb buffer. + * + * Called by the user via ioctl. + * + * Returns: + * Zero on success, errno on failure. + */ int drm_mode_mmap_dumb_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { @@ -3731,6 +4237,21 @@ int drm_mode_mmap_dumb_ioctl(struct drm_device *dev, return dev->driver->dumb_map_offset(file_priv, dev, args->handle, &args->offset); }
+/** + * drm_mode_destroy_dumb_ioctl - destroy a dumb backing strage buffer + * @dev: DRM device + * @data: ioctl data + * @file_priv: DRM file info + * + * This destroys the userspace handle for the given dumb backing storage buffer. + * Since buffer objects must be reference counted in the kernel a buffer object + * won't be immediately freed if a framebuffer modeset object still uses it. + * + * Called by the user via ioctl. + * + * Returns: + * Zero on success, errno on failure. + */ int drm_mode_destroy_dumb_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { @@ -3742,9 +4263,14 @@ int drm_mode_destroy_dumb_ioctl(struct drm_device *dev, return dev->driver->dumb_destroy(file_priv, dev, args->handle); }
-/* - * Just need to support RGB formats here for compat with code that doesn't - * use pixel formats directly yet. +/** + * drm_fb_get_bpp_depth - get the bpp/depth values for format + * @format: pixel format (DRM_FORMAT_*) + * @depth: storage for the depth value + * @bpp: storage for the bpp value + * + * This only supports RGB formats here for compat with code that doesn't use + * pixel formats directly yet. */ void drm_fb_get_bpp_depth(uint32_t format, unsigned int *depth, int *bpp) @@ -3816,7 +4342,7 @@ EXPORT_SYMBOL(drm_fb_get_bpp_depth); * drm_format_num_planes - get the number of planes for format * @format: pixel format (DRM_FORMAT_*) * - * RETURNS: + * Returns: * The number of planes used by the specified pixel format. */ int drm_format_num_planes(uint32_t format) @@ -3851,7 +4377,7 @@ EXPORT_SYMBOL(drm_format_num_planes); * @format: pixel format (DRM_FORMAT_*) * @plane: plane index * - * RETURNS: + * Returns: * The bytes per pixel value for the specified plane. */ int drm_format_plane_cpp(uint32_t format, int plane) @@ -3897,7 +4423,7 @@ EXPORT_SYMBOL(drm_format_plane_cpp); * drm_format_horz_chroma_subsampling - get the horizontal chroma subsampling factor * @format: pixel format (DRM_FORMAT_*) * - * RETURNS: + * Returns: * The horizontal chroma subsampling factor for the * specified pixel format. */ @@ -3932,7 +4458,7 @@ EXPORT_SYMBOL(drm_format_horz_chroma_subsampling); * drm_format_vert_chroma_subsampling - get the vertical chroma subsampling factor * @format: pixel format (DRM_FORMAT_*) * - * RETURNS: + * Returns: * The vertical chroma subsampling factor for the * specified pixel format. */