Signed-off-by: Denis Carikli denis@eukrea.com --- ChangeLog 12->v13: - No changes ChangeLog 11->v12: - Improved the define names to match the hardware: ENABLE_POL is not a clock signal but instead an enable signal.
ChangeLog v9->v10: - New patch which was splitted out from: "staging: imx-drm: Use de-active and pixelclk-active display-timings.". - Fixes many issues in "staging: imx-drm: Use de-active and pixelclk-active display-timings.": - More clear meaning of the polarity settings. - The SET_CLK_POL and SET_DE_POL masks are not needed anymore. --- drivers/staging/imx-drm/ipu-v3/imx-ipu-v3.h | 8 +++++++- drivers/staging/imx-drm/ipu-v3/ipu-di.c | 4 ++-- drivers/staging/imx-drm/ipuv3-crtc.c | 4 ++-- 3 files changed, 11 insertions(+), 5 deletions(-)
diff --git a/drivers/staging/imx-drm/ipu-v3/imx-ipu-v3.h b/drivers/staging/imx-drm/ipu-v3/imx-ipu-v3.h index c2c6fab..015e3bf 100644 --- a/drivers/staging/imx-drm/ipu-v3/imx-ipu-v3.h +++ b/drivers/staging/imx-drm/ipu-v3/imx-ipu-v3.h @@ -27,6 +27,12 @@ enum ipuv3_type {
#define IPU_PIX_FMT_GBR24 v4l2_fourcc('G', 'B', 'R', '3')
+#define CLK_POL_NEGEDGE 0 +#define CLK_POL_POSEDGE 1 + +#define ENABLE_POL_LOW 0 +#define ENABLE_POL_HIGH 1 + /* * Bitfield of Display Interface signal polarities. */ @@ -37,7 +43,7 @@ struct ipu_di_signal_cfg { unsigned clksel_en:1; unsigned clkidle_en:1; unsigned data_pol:1; /* true = inverted */ - unsigned clk_pol:1; /* true = rising edge */ + unsigned clk_pol:1; unsigned enable_pol:1; unsigned Hsync_pol:1; /* true = active high */ unsigned Vsync_pol:1; diff --git a/drivers/staging/imx-drm/ipu-v3/ipu-di.c b/drivers/staging/imx-drm/ipu-v3/ipu-di.c index 849b3e1..0ce3f52 100644 --- a/drivers/staging/imx-drm/ipu-v3/ipu-di.c +++ b/drivers/staging/imx-drm/ipu-v3/ipu-di.c @@ -595,7 +595,7 @@ int ipu_di_init_sync_panel(struct ipu_di *di, struct ipu_di_signal_cfg *sig) } }
- if (sig->clk_pol) + if (sig->clk_pol == CLK_POL_POSEDGE) di_gen |= DI_GEN_POLARITY_DISP_CLK;
ipu_di_write(di, di_gen, DI_GENERAL); @@ -606,7 +606,7 @@ int ipu_di_init_sync_panel(struct ipu_di *di, struct ipu_di_signal_cfg *sig) reg = ipu_di_read(di, DI_POL); reg &= ~(DI_POL_DRDY_DATA_POLARITY | DI_POL_DRDY_POLARITY_15);
- if (sig->enable_pol) + if (sig->enable_pol == ENABLE_POL_HIGH) reg |= DI_POL_DRDY_POLARITY_15; if (sig->data_pol) reg |= DI_POL_DRDY_DATA_POLARITY; diff --git a/drivers/staging/imx-drm/ipuv3-crtc.c b/drivers/staging/imx-drm/ipuv3-crtc.c index 47bec5e..ba9eea3 100644 --- a/drivers/staging/imx-drm/ipuv3-crtc.c +++ b/drivers/staging/imx-drm/ipuv3-crtc.c @@ -165,8 +165,8 @@ static int ipu_crtc_mode_set(struct drm_crtc *crtc, if (mode->flags & DRM_MODE_FLAG_PVSYNC) sig_cfg.Vsync_pol = 1;
- sig_cfg.enable_pol = 1; - sig_cfg.clk_pol = 0; + sig_cfg.enable_pol = ENABLE_POL_HIGH; + sig_cfg.clk_pol = CLK_POL_NEGEDGE; sig_cfg.width = mode->hdisplay; sig_cfg.height = mode->vdisplay; sig_cfg.pixel_fmt = out_pixel_fmt;