On 09.03.2018 11:24, Roger Quadros wrote:
Hi,
On 27/02/18 09:11, Andrzej Hajda wrote:
These bindings allow to describe most known standard USB connectors and it should be possible to extend it if necessary. USB connectors, beside USB can be used to route other protocols, for example UART, Audio, MHL. In such case every device passing data through the connector should have appropriate graph bindings.
Signed-off-by: Andrzej Hajda a.hajda@samsung.com
v4:
- improved 'type' description (Rob),
- improved description of 2nd example (Rob).
v3:
- removed MHL port (samsung connector will have separate bindings),
- added 2nd example for USB-C,
- improved formatting.
v2:
- moved connector type(A,B,C) to compatible string (Rob),
- renamed size property to type (Rob),
- changed type description to be less confusing (Laurent),
- removed vendor specific compatibles (implied by graph port number),
- added requirement of connector being a child of IC (Rob),
- removed max-mode (subtly suggested by Rob, it should be detected anyway by USB Controller in runtime, downside is that device is not able to report its real capabilities, maybe better would be to make it optional(?)),
- assigned port numbers to data buses (Rob).
Regards Andrzej
.../bindings/connector/usb-connector.txt | 75 ++++++++++++++++++++++ 1 file changed, 75 insertions(+) create mode 100644 Documentation/devicetree/bindings/connector/usb-connector.txt
diff --git a/Documentation/devicetree/bindings/connector/usb-connector.txt b/Documentation/devicetree/bindings/connector/usb-connector.txt new file mode 100644 index 000000000000..e1463f14af38 --- /dev/null +++ b/Documentation/devicetree/bindings/connector/usb-connector.txt @@ -0,0 +1,75 @@ +USB Connector +=============
+USB connector node represents physical USB connector. It should be +a child of USB interface controller.
+Required properties: +- compatible: describes type of the connector, must be one of:
- "usb-a-connector",
- "usb-b-connector",
- "usb-c-connector".
compatible should be just "usb-connector"
Type should be a property
type: type of usb connector "A", "B", "AB", "C" AB is for dual-role connectors.
I have proposed such property (and size also) in my first RFC [1]. Rod did not like it :)
[1]: https://marc.info/?l=devicetree&m=150660411515233&w=2
micro super-speed and high-speed connectors are different. How do you differentiate that?
I am aware of it, and property differentiating it was also in my earlier iterations. If there will be need to differentiate such connectors, adding property max-speed or max-mode would do the thing.
+Optional properties: +- label: symbolic name for the connector,
Why do you need label? We can't maintain consistency as people will put creative names there. Device/bus driver could generate a valid label.
It follows convention for other connectors: HDMI, DVI, ....
+- type: size of the connector, should be specified in case of USB-A, USB-B
- non-fullsize connectors: "mini", "micro".
type is misleading. Type is usually A/B/C. It should be size here instead.
As you can see in discussion for previous iterations it follows convention already established for other connectors.
size: size of the connector if not standard size. "mini", "micro"
If not specified it is treated as standard sized connector. e.g. for Type-C there is no mini/micro. so size doesn't have to be specificed
Few lines above it is described: should be specified in case of USB-A, USB-B non-fullsize connectors.
What about Type-C connector?
+Required nodes: +- any data bus to the connector should be modeled using the OF graph bindings
s/modeled/modelled
- specified in bindings/graph.txt, unless the bus is between parent node and
- the connector. Since single connector can have multpile data buses every bus
s/multpile/multiple
OK, I will fix both typos.
- has assigned OF graph port number as follows:
- 0: High Speed (HS), present in all connectors,
- 1: Super Speed (SS), present in SS capable connectors,
- 2: Sideband use (SBU), present in USB-C.
+Examples +--------
+1. Micro-USB connector with HS lines routed via controller (MUIC):
+muic-max77843@66 {
- ...
- usb_con: connector {
compatible = "usb-b-connector";label = "micro-USB";type = "micro";- };
+};
+2. USB-C connector attached to CC controller (s2mm005), HS lines routed +to companion PMIC (max77865), SS lines to USB3 PHY and SBU to DisplayPort. +DisplayPort video lines are routed to the connector via SS mux in USB3 PHY.
+ccic: s2mm005@33 {
- ...
- usb_con: connector {
compatible = "usb-c-connector";label = "USB-C";The label is not consistent with the earlier example.
Why?
Regards Andrzej
ports {#address-cells = <1>;#size-cells = <0>;port@0 {reg = <0>;usb_con_hs: endpoint {remote-endpoint = <&max77865_usbc_hs>;};};port@1 {reg = <1>;usb_con_ss: endpoint {remote-endpoint = <&usbdrd_phy_ss>;};};port@2 {reg = <2>;usb_con_sbu: endpoint {remote-endpoint = <&dp_aux>;};};};- };
+};