Move drm/bridge documentation to video/bridge. Also, add proper documentation for gpios used by ptn3460.
Signed-off-by: Ajay Kumar ajaykumar.rs@samsung.com --- .../devicetree/bindings/drm/bridge/ptn3460.txt | 39 -------------------- .../devicetree/bindings/video/bridge/ptn3460.txt | 39 ++++++++++++++++++++ 2 files changed, 39 insertions(+), 39 deletions(-) delete mode 100644 Documentation/devicetree/bindings/drm/bridge/ptn3460.txt create mode 100644 Documentation/devicetree/bindings/video/bridge/ptn3460.txt
diff --git a/Documentation/devicetree/bindings/drm/bridge/ptn3460.txt b/Documentation/devicetree/bindings/drm/bridge/ptn3460.txt deleted file mode 100644 index 663fe6c..0000000 --- a/Documentation/devicetree/bindings/drm/bridge/ptn3460.txt +++ /dev/null @@ -1,39 +0,0 @@ -ptn3460 bridge bindings - -Required properties: - - compatible: "nxp,ptn3460" - - reg: i2c address of the bridge - - powerdown-gpio: OF device-tree gpio specification - - reset-gpio: OF device-tree gpio specification - - edid-emulation: The EDID emulation entry to use - +-------+------------+------------------+ - | Value | Resolution | Description | - | 0 | 1024x768 | NXP Generic | - | 1 | 1920x1080 | NXP Generic | - | 2 | 1920x1080 | NXP Generic | - | 3 | 1600x900 | Samsung LTM200KT | - | 4 | 1920x1080 | Samsung LTM230HT | - | 5 | 1366x768 | NXP Generic | - | 6 | 1600x900 | ChiMei M215HGE | - +-------+------------+------------------+ - - - video interfaces: Device node can contain video interface port - nodes for panel according to [1]. - -[1]: Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: - lvds-bridge@20 { - compatible = "nxp,ptn3460"; - reg = <0x20>; - powerdown-gpio = <&gpy2 5 1 0 0>; - reset-gpio = <&gpx1 5 1 0 0>; - edid-emulation = <5>; - ports { - port@0 { - bridge_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/video/bridge/ptn3460.txt b/Documentation/devicetree/bindings/video/bridge/ptn3460.txt new file mode 100644 index 0000000..361971b --- /dev/null +++ b/Documentation/devicetree/bindings/video/bridge/ptn3460.txt @@ -0,0 +1,39 @@ +ptn3460 bridge bindings + +Required properties: + - compatible: "nxp,ptn3460" + - reg: i2c address of the bridge + - powerdown-gpio: OF device-tree gpio specification for PD_N pin. + - reset-gpio: OF device-tree gpio specification for RST_N pin. + - edid-emulation: The EDID emulation entry to use + +-------+------------+------------------+ + | Value | Resolution | Description | + | 0 | 1024x768 | NXP Generic | + | 1 | 1920x1080 | NXP Generic | + | 2 | 1920x1080 | NXP Generic | + | 3 | 1600x900 | Samsung LTM200KT | + | 4 | 1920x1080 | Samsung LTM230HT | + | 5 | 1366x768 | NXP Generic | + | 6 | 1600x900 | ChiMei M215HGE | + +-------+------------+------------------+ + + - video interfaces: Device node can contain video interface port + nodes for panel according to [1]. + +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt + +Example: + lvds-bridge@20 { + compatible = "nxp,ptn3460"; + reg = <0x20>; + powerdown-gpio = <&gpy2 5 1 0 0>; + reset-gpio = <&gpx1 5 1 0 0>; + edid-emulation = <5>; + ports { + port@0 { + bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + };