The SKY81452 backlight driver just obtains a GPIO (named "gpios" in the device tree) drives it high and leaves it high until the driver is removed.
Switch to use GPIO descriptors for this, simple and straight-forward.
Cc: Gyungoh Yoo jack.yoo@skyworksinc.com Signed-off-by: Linus Walleij linus.walleij@linaro.org --- drivers/video/backlight/sky81452-backlight.c | 18 ++++-------------- .../linux/platform_data/sky81452-backlight.h | 6 ++++-- 2 files changed, 8 insertions(+), 16 deletions(-)
diff --git a/drivers/video/backlight/sky81452-backlight.c b/drivers/video/backlight/sky81452-backlight.c index 2355f00f5773..81d2c8f3ca50 100644 --- a/drivers/video/backlight/sky81452-backlight.c +++ b/drivers/video/backlight/sky81452-backlight.c @@ -8,12 +8,11 @@
#include <linux/backlight.h> #include <linux/err.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/of.h> -#include <linux/of_gpio.h> #include <linux/platform_device.h> #include <linux/regmap.h> #include <linux/platform_data/sky81452-backlight.h> @@ -182,7 +181,7 @@ static struct sky81452_bl_platform_data *sky81452_bl_parse_dt( pdata->ignore_pwm = of_property_read_bool(np, "skyworks,ignore-pwm"); pdata->dpwm_mode = of_property_read_bool(np, "skyworks,dpwm-mode"); pdata->phase_shift = of_property_read_bool(np, "skyworks,phase-shift"); - pdata->gpio_enable = of_get_gpio(np, 0); + pdata->gpiod_enable = devm_gpiod_get_optional(dev, NULL, GPIOD_OUT_HIGH);
ret = of_property_count_u32_elems(np, "led-sources"); if (ret < 0) { @@ -264,15 +263,6 @@ static int sky81452_bl_probe(struct platform_device *pdev) return PTR_ERR(pdata); }
- if (gpio_is_valid(pdata->gpio_enable)) { - ret = devm_gpio_request_one(dev, pdata->gpio_enable, - GPIOF_OUT_INIT_HIGH, "sky81452-en"); - if (ret < 0) { - dev_err(dev, "failed to request GPIO. err=%d\n", ret); - return ret; - } - } - ret = sky81452_bl_init_device(regmap, pdata); if (ret < 0) { dev_err(dev, "failed to initialize. err=%d\n", ret); @@ -312,8 +302,8 @@ static int sky81452_bl_remove(struct platform_device *pdev) bd->props.brightness = 0; backlight_update_status(bd);
- if (gpio_is_valid(pdata->gpio_enable)) - gpio_set_value_cansleep(pdata->gpio_enable, 0); + if (pdata->gpiod_enable) + gpiod_set_value_cansleep(pdata->gpiod_enable, 0);
return 0; } diff --git a/include/linux/platform_data/sky81452-backlight.h b/include/linux/platform_data/sky81452-backlight.h index 02653d92d84f..d6f46670d923 100644 --- a/include/linux/platform_data/sky81452-backlight.h +++ b/include/linux/platform_data/sky81452-backlight.h @@ -9,11 +9,13 @@ #ifndef _SKY81452_BACKLIGHT_H #define _SKY81452_BACKLIGHT_H
+#include <linux/gpio/consumer.h> + /** * struct sky81452_platform_data * @name: backlight driver name. If it is not defined, default name is lcd-backlight. - * @gpio_enable:GPIO number which control EN pin + * @gpios_enable:GPIO descriptor which control EN pin * @enable: Enable mask for current sink channel 1, 2, 3, 4, 5 and 6. * @ignore_pwm: true if DPWMI should be ignored. * @dpwm_mode: true is DPWM dimming mode, otherwise Analog dimming mode. @@ -23,7 +25,7 @@ */ struct sky81452_bl_platform_data { const char *name; - int gpio_enable; + struct gpio_desc *gpiod_enable; unsigned int enable; bool ignore_pwm; bool dpwm_mode;