On 2016-06-29 01:17, Meng Yi wrote:
add of_graph dt binding for panel, and "fsl,panel" property
Nit: "binding" typically describes the requirement, the specification and hence is under Documentation/devicetree/bindings/.
What you add here is the dt nodes according to the bindings...
Hence I would say something like
Add of_graph dt nodes to describe the panel and remove the "fsl,panel" property.
is deprecated
Signed-off-by: Meng Yi meng.yi@nxp.com
Changes in V2:
-dropp the unit address of port
arch/arm/boot/dts/ls1021a-twr.dts | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts index 75ecaed..cbd92c8 100644 --- a/arch/arm/boot/dts/ls1021a-twr.dts +++ b/arch/arm/boot/dts/ls1021a-twr.dts @@ -108,12 +108,22 @@
panel: panel { compatible = "nec,nl4827hc19-05b";
Nit: We typically add a new line before adding a subnode.
port {panel_out: endpoint {remote-endpoint = <&dcu_out>;};};};
&dcu {
- fsl,panel = <&panel>; status = "okay";
- port: port {
Same as in bindings, port does not need a label too.
dcu_out: endpoint {remote-endpoint = <&panel_out>;};- };
};
&dspi1 {
There is still a patch for vf-colibri-eval-v3.dtsi missing which does the same.
-- Stefan