Hi Andy,
Some minor comments inline.
On 11/11/14 12:54, Andy Yan wrote:
Signed-off-by: Andy Yan andy.yan@rock-chips.com
Changes in v7: None Changes in v6: None Changes in v5: None Changes in v4: None Changes in v3: None Changes in v2: None
.../devicetree/bindings/drm/bridge/dw-hdmi.txt | 38 ++++++++++++++++++++++ 1 file changed, 38 insertions(+) create mode 100644 Documentation/devicetree/bindings/drm/bridge/dw-hdmi.txt
diff --git a/Documentation/devicetree/bindings/drm/bridge/dw-hdmi.txt b/Documentation/devicetree/bindings/drm/bridge/dw-hdmi.txt new file mode 100644 index 0000000..aa7ed17 --- /dev/null +++ b/Documentation/devicetree/bindings/drm/bridge/dw-hdmi.txt @@ -0,0 +1,38 @@ +DesignWare HDMI bridge bindings
+Required properities:
^properties
+- compatibel: platform specific such as "fsl,imx6q-hdmi","fsl,imx6dl-hdmi"
^compatible
"rockchip,rk3288-dw-hdmi"
This will need to come in a separate series which adds rk3288 hdmi support..
+- reg: physical base address of the controller and length +- ddc-i2c-bus: the ddc i2c bus +- interrupts: The interrupt number to the cpu
+Optional properties +- reg-io-width: the width of the reg:1,4, default set to 1 if not present
+Example:
- hdmi: hdmi@0120000 {
compatible = "fsl,imx6q-hdmi";reg = <0x00120000 0x9000>;interrupts = <0 115 0x04>;gpr = <&gpr>;clocks = <&clks 123>, <&clks 124>;clock-names = "iahb", "isfr";ddc-i2c-bus = <&i2c2>;port@0 {reg = <0>;hdmi_mux_0: endpoint {remote-endpoint = <&ipu1_di0_hdmi>;};};port@1 {reg = <1>;hdmi_mux_1: endpoint {remote-endpoint = <&ipu1_di1_hdmi>;};};- };
Thanks ZubairLK