On Sun, Feb 06, 2022 at 09:00:11AM +0100, Andreas Kemnade wrote:
Add a binding for the Electrophoretic Display Controller found at least in the i.MX6.
The first version was in i.MX50 (I helped design the register interface). Is that version compatible?
The timing subnode is directly here to avoid having display parameters spread all over the plate.
Supplies are organized the same way as in the fbdev driver in the NXP/Freescale kernel forks. The regulators used for that purpose, like the TPS65185, the SY7636A and MAX17135 have typically a single bit to start a bunch of regulators of higher or negative voltage with a well-defined timing. VCOM can be handled separately, but can also be incorporated into that single bit.
Signed-off-by: Andreas Kemnade andreas@kemnade.info
.../bindings/display/imx/fsl,mxc-epdc.yaml | 159 ++++++++++++++++++ 1 file changed, 159 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,mxc-epdc.yaml
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,mxc-epdc.yaml b/Documentation/devicetree/bindings/display/imx/fsl,mxc-epdc.yaml new file mode 100644 index 000000000000..7e0795cc3f70 --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,mxc-epdc.yaml @@ -0,0 +1,159 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,mxc-epdc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml#
+title: Freescale i.MX6 EPDC
+maintainers:
- Andreas Kemnade andreas@kemnade.info
+description: |
- The EPDC is a controller for handling electronic paper displays found in
- i.MX6 SoCs.
+properties:
- compatible:
- enum:
- fsl,imx6sl-epdc
- fsl,imx6sll-epdc
Not compatible with each other?
- reg:
- maxItems: 1
- clocks:
- items:
- description: Bus clock
- description: Pixel clock
- clock-names:
- items:
- const: axi
- const: pix
- interrupts:
- maxItems: 1
- vscan-holdoff:
- $ref: /schemas/types.yaml#/definitions/uint32
- maxItems: 1
- sdoed-width:
- $ref: /schemas/types.yaml#/definitions/uint32
- maxItems: 1
- sdoed-delay:
- $ref: /schemas/types.yaml#/definitions/uint32
- maxItems: 1
- sdoez-width:
- $ref: /schemas/types.yaml#/definitions/uint32
- maxItems: 1
- sdoez-delay:
- $ref: /schemas/types.yaml#/definitions/uint32
- maxItems: 1
- gdclk-hp-offs:
- $ref: /schemas/types.yaml#/definitions/uint32
- maxItems: 1
- gdsp-offs:
- $ref: /schemas/types.yaml#/definitions/uint32
- maxItems: 1
- gdoe-offs:
- $ref: /schemas/types.yaml#/definitions/uint32
- maxItems: 1
- gdclk-offs:
- $ref: /schemas/types.yaml#/definitions/uint32
- maxItems: 1
- num-ce:
- $ref: /schemas/types.yaml#/definitions/uint32
- maxItems: 1
All these need a vendor prefix and descriptions.
- timing:
- $ref: /display/panel/panel-timing.yaml#
- DISPLAY-supply:
- description:
A couple of +/- voltages automatically powered on in a defintive order
- VCOM-supply:
- description: compensation voltage
- V3P3-supply:
- description: V3P3 supply
- epd-thermal-zone:
- description:
Zone to get temperature of the EPD from, practically ambient temperature.
1 blank line.
+required:
- compatible
- reg
- clocks
- clock-names
- interrupts
- vscan-holdoff
- sdoed-width
- sdoed-delay
- sdoez-width
- sdoez-delay
- gdclk-hp-offs
- gdsp-offs
- gdoe-offs
- gdclk-offs
- num-ce
+additionalProperties: false
+examples:
- |
- #include <dt-bindings/clock/imx6sl-clock.h>
- #include <dt-bindings/interrupt-controller/arm-gic.h>
- epdc: epdc@20f4000 {
compatible = "fsl,imx6sl-epdc";
reg = <0x020f4000 0x4000>;
interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_EPDC_AXI>, <&clks IMX6SL_CLK_EPDC_PIX>;
clock-names = "axi", "pix";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_epdc0>;
V3P3-supply = <&V3P3_reg>;
VCOM-supply = <&VCOM_reg>;
DISPLAY-supply = <&DISPLAY_reg>;
epd-thermal-zone = "epd-thermal";
vscan-holdoff = <4>;
sdoed-width = <10>;
sdoed-delay = <20>;
sdoez-width = <10>;
sdoez-delay = <20>;
gdclk-hp-offs = <562>;
gdsp-offs = <662>;
gdoe-offs = <0>;
gdclk-offs = <225>;
num-ce = <3>;
status = "okay";
Don't need status in examples.
timing {
clock-frequency = <80000000>;
hactive = <1448>;
hback-porch = <16>;
hfront-porch = <102>;
hsync-len = <28>;
vactive = <1072>;
vback-porch = <4>;
vfront-porch = <4>;
vsync-len = <2>;
};
- };
+...
2.30.2