Quoting Biju Das (2022-04-19 15:24:53)
Connector detection using poll method won't work in case of bridge attached to the encoder with the flag DRM_BRIDGE_ATTACH_NO_CONNECTOR, as the code defaults to HPD.
Enable DRM_BRIDGE_OP_HPD based on HPD interrupt availability, so that it will fall back to polling, if HPD is not available.
Reviewed-by: Kieran Bingham kieran.bingham+renesas@ideasonboard.com
Signed-off-by: Biju Das biju.das.jz@bp.renesas.com
drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c index 668dcefbae17..b3f10c54e064 100644 --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c @@ -1292,8 +1292,10 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id) goto err_unregister_cec;
adv7511->bridge.funcs = &adv7511_bridge_funcs;
adv7511->bridge.ops = DRM_BRIDGE_OP_DETECT | DRM_BRIDGE_OP_EDID| DRM_BRIDGE_OP_HPD;
adv7511->bridge.ops = DRM_BRIDGE_OP_DETECT | DRM_BRIDGE_OP_EDID;if (adv7511->i2c_main->irq)adv7511->bridge.ops |= DRM_BRIDGE_OP_HPD;adv7511->bridge.of_node = dev->of_node; adv7511->bridge.type = DRM_MODE_CONNECTOR_HDMIA;-- 2.25.1