This patch adds device tree bindings for i.MX specific Synopsys DW MIPI DSI driver.
Signed-off-by: Liu Ying Ying.Liu@freescale.com --- v5->v6: * Add the #address-cells and #size-cells properties in the example 'ports' node. * Remove the useless pllref_gate clock from the required clocks, clock-names property.
v4->v5: * None.
v3->v4: * Newly introduced in v4. This is separated from the relevant driver patch in v3 to address Stefan Wahren's comment.
.../devicetree/bindings/drm/imx/mipi_dsi.txt | 78 ++++++++++++++++++++++ 1 file changed, 78 insertions(+) create mode 100644 Documentation/devicetree/bindings/drm/imx/mipi_dsi.txt
diff --git a/Documentation/devicetree/bindings/drm/imx/mipi_dsi.txt b/Documentation/devicetree/bindings/drm/imx/mipi_dsi.txt new file mode 100644 index 0000000..75a7766 --- /dev/null +++ b/Documentation/devicetree/bindings/drm/imx/mipi_dsi.txt @@ -0,0 +1,78 @@ +i.MX specific Device-Tree bindings for Synopsys DesignWare MIPI DSI host controller + +MIPI DSI host controller +======================== + +The MIPI DSI host controller is a Synopsys DesignWare IP. +The common device tree documentation for this controller can be found +at [1]. + +Required properties: + - #address-cells: Should be <1>. + - #size-cells: Should be <0>. + - compatible: The compatible string should be "fsl,imx6q-mipi-dsi" + for i.MX6q/sdl SoCs. + - reg: Physical base address of the controller and length of memory + mapped region. + - interrupts: The controller's interrupt number to the CPU(s). + - gpr: Should be <&gpr>. + The phandle points to the iomuxc-gpr region containing the + multiplexer control register for the controller. + - clocks, clock-names: Phandles to the controller pllref and core_cfg clocks, + as described in [2] and [3]. + +Required sub-nodes: + - ports: This node may contain up to four port nodes with endpoint + definitions as defined in [4], corresponding to the four inputs to + the controller multiplexer. + - A node to represent a DSI peripheral as described in [5]. + +[1] Documentation/devicetree/bindings/drm/bridge/dw_mipi_dsi.txt. +[2] Documentation/devicetree/bindings/clock/clock-bindings.txt +[3] Documentation/devicetree/bindings/clock/imx6q-clock.txt +[4] Documentation/devicetree/bindings/media/video-interfaces.txt +[5] Documentation/devicetree/bindings/mipi/dsi/mipi-dsi-bus.txt + +example: + gpr: iomuxc-gpr@020e0000 { + /* ... */ + }; + + mipi_dsi: mipi@021e0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6q-mipi-dsi"; + reg = <0x021e0000 0x4000>; + interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>; + gpr = <&gpr>; + clocks = <&clks IMX6QDL_CLK_MIPI_CORE_CFG>, + <&clks IMX6QDL_CLK_MIPI_CORE_CFG>; + clock-names = "pllref", "core_cfg"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mipi_mux_0: endpoint { + remote-endpoint = <&ipu1_di0_mipi>; + }; + }; + + port@1 { + reg = <1>; + + mipi_mux_1: endpoint { + remote-endpoint = <&ipu1_di1_mipi>; + }; + }; + }; + + panel { + compatible = "truly,tft480800-16-e-dsi"; + reg = <0>; + /* ... */ + }; + };