Lane swap configuration is based on the board design. This change allows the DSI host to get this information from device tree, instead of hardcoding in driver.
Signed-off-by: Hai Li hali@codeaurora.org --- Documentation/devicetree/bindings/drm/msm/dsi.txt | 13 ++++++ drivers/gpu/drm/msm/dsi/dsi_host.c | 49 +++++++++++++++++------ 2 files changed, 49 insertions(+), 13 deletions(-)
diff --git a/Documentation/devicetree/bindings/drm/msm/dsi.txt b/Documentation/devicetree/bindings/drm/msm/dsi.txt index d56923c..febcc51 100644 --- a/Documentation/devicetree/bindings/drm/msm/dsi.txt +++ b/Documentation/devicetree/bindings/drm/msm/dsi.txt @@ -44,6 +44,17 @@ Optional properties: - port: DSI controller output port. This contains one endpoint subnode, with its remote-endpoint set to the phandle of the connected panel's endpoint. See Documentation/devicetree/bindings/graph.txt for device graph info. +- qcom,dsi-logical-lane-swap: Character string to swap logical lane to physical + lane mapping. Supported lane mappings: + "0123": Logic 0->Phys 0; Logic 1->Phys 1; Logic 2->Phys 2; Logic 3->Phys 3; + "3012": Logic 3->Phys 0; Logic 0->Phys 1; Logic 1->Phys 2; Logic 2->Phys 3; + "2301": Logic 2->Phys 0; Logic 3->Phys 1; Logic 0->Phys 2; Logic 1->Phys 3; + "1230": Logic 1->Phys 0; Logic 2->Phys 1; Logic 3->Phys 2; Logic 0->Phys 3; + "0321": Logic 0->Phys 0; Logic 3->Phys 1; Logic 2->Phys 2; Logic 1->Phys 3; + "1032": Logic 1->Phys 0; Logic 0->Phys 1; Logic 3->Phys 2; Logic 2->Phys 3; + "2103": Logic 2->Phys 0; Logic 1->Phys 1; Logic 0->Phys 2; Logic 3->Phys 3; + "3210": Logic 3->Phys 0; Logic 2->Phys 1; Logic 1->Phys 2; Logic 0->Phys 3; + Default value is "0123", which means no lane swap.
DSI PHY: Required properties: @@ -129,6 +140,8 @@ Example: remote-endpoint = <&panel_in>; }; }; + + qcom,dsi-logical-lane-swap = "0123"; };
mdss_dsi_phy0: qcom,mdss_dsi_phy@fd922a00 { diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c index 8d82973f..eaba417 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_host.c +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c @@ -131,6 +131,7 @@ struct msm_dsi_host { enum mipi_dsi_pixel_format format; unsigned long mode_flags;
+ u32 dlane_swap; u32 dma_cmd_ctrl_restore;
bool registered; @@ -684,19 +685,9 @@ static void dsi_ctrl_config(struct msm_dsi_host *msm_host, bool enable, data = DSI_CTRL_CLK_EN;
DBG("lane number=%d", msm_host->lanes); - if (msm_host->lanes == 2) { - data |= DSI_CTRL_LANE1 | DSI_CTRL_LANE2; - /* swap lanes for 2-lane panel for better performance */ - dsi_write(msm_host, REG_DSI_LANE_SWAP_CTRL, - DSI_LANE_SWAP_CTRL_DLN_SWAP_SEL(LANE_SWAP_1230)); - } else { - /* Take 4 lanes as default */ - data |= DSI_CTRL_LANE0 | DSI_CTRL_LANE1 | DSI_CTRL_LANE2 | - DSI_CTRL_LANE3; - /* Do not swap lanes for 4-lane panel */ - dsi_write(msm_host, REG_DSI_LANE_SWAP_CTRL, - DSI_LANE_SWAP_CTRL_DLN_SWAP_SEL(LANE_SWAP_0123)); - } + data |= ((DSI_CTRL_LANE0 << msm_host->lanes) - DSI_CTRL_LANE0); + dsi_write(msm_host, REG_DSI_LANE_SWAP_CTRL, + DSI_LANE_SWAP_CTRL_DLN_SWAP_SEL(msm_host->dlane_swap));
if (!(flags & MIPI_DSI_CLOCK_NON_CONTINUOUS)) dsi_write(msm_host, REG_DSI_LANE_CTRL, @@ -1289,6 +1280,9 @@ static int dsi_host_attach(struct mipi_dsi_host *host, struct msm_dsi_host *msm_host = to_msm_dsi_host(host); int ret;
+ if (dsi->lanes > 4 || dsi->channel > 3) + return -EINVAL; + msm_host->channel = dsi->channel; msm_host->lanes = dsi->lanes; msm_host->format = dsi->format; @@ -1344,6 +1338,33 @@ static struct mipi_dsi_host_ops dsi_host_ops = { .transfer = dsi_host_transfer, };
+static void dsi_parse_dlane_swap(struct msm_dsi_host *msm_host, + struct device_node *np) +{ + const char *lane_swap; + + lane_swap = of_get_property(np, "qcom,dsi-logical-lane-swap", NULL); + + if (!lane_swap) + msm_host->dlane_swap = LANE_SWAP_0123; + else if (!strncmp(lane_swap, "3012", 5)) + msm_host->dlane_swap = LANE_SWAP_3012; + else if (!strncmp(lane_swap, "2301", 5)) + msm_host->dlane_swap = LANE_SWAP_2301; + else if (!strncmp(lane_swap, "1230", 5)) + msm_host->dlane_swap = LANE_SWAP_1230; + else if (!strncmp(lane_swap, "0321", 5)) + msm_host->dlane_swap = LANE_SWAP_0321; + else if (!strncmp(lane_swap, "1032", 5)) + msm_host->dlane_swap = LANE_SWAP_1032; + else if (!strncmp(lane_swap, "2103", 5)) + msm_host->dlane_swap = LANE_SWAP_2103; + else if (!strncmp(lane_swap, "3210", 5)) + msm_host->dlane_swap = LANE_SWAP_3210; + else + msm_host->dlane_swap = LANE_SWAP_0123; +} + static int dsi_host_parse_dt(struct msm_dsi_host *msm_host) { struct device *dev = &msm_host->pdev->dev; @@ -1358,6 +1379,8 @@ static int dsi_host_parse_dt(struct msm_dsi_host *msm_host) return ret; }
+ dsi_parse_dlane_swap(msm_host, np); + /* * Get the first endpoint node. In our case, dsi has one output port * to which the panel is connected. Don't return an error if a port