Re: [RFC] drm/msm/disp/dpu1: add support for inline rotation in dpu driver

On 03/07/2021 14:32, Kalyan Thota wrote:

Add inline rotation support in dpu driver. This change adds rotation config for SC7280 target.

Change-Id: I15861dc03422274ffd823fc0fc2c1e47909bb22c Signed-off-by: Kalyan Thota kalyan_t@codeaurora.org

---

drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 47 +++++++++---- drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 20 ++++++ drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 93 ++++++++++++++++++++------ drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h | 2 + 4 files changed, 128 insertions(+), 34 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c index d01c4c9..45e4e56 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c @@ -25,6 +25,9 @@ #define VIG_SM8250_MASK \ (VIG_MASK | BIT(DPU_SSPP_QOS_8LVL) | BIT(DPU_SSPP_SCALER_QSEED3LITE))

+#define VIG_SC7280_MASK \

• (VIG_SC7180_MASK | BIT(DPU_SSPP_INLINE_ROTATION))
• #define DMA_SDM845_MASK \ (BIT(DPU_SSPP_SRC) | BIT(DPU_SSPP_QOS) | BIT(DPU_SSPP_QOS_8LVL) |\ BIT(DPU_SSPP_TS_PREFILL) | BIT(DPU_SSPP_TS_PREFILL_REC1) |\

@@ -102,6 +105,8 @@ #define MAX_DOWNSCALE_RATIO 4 #define SSPP_UNITY_SCALE 1

+#define INLINE_ROTATOR_V2 2

• #define STRCAT(X, Y) (X Y)

  static const uint32_t plane_formats[] = {

@@ -177,6 +182,11 @@ static const uint32_t plane_formats_yuv[] = { DRM_FORMAT_YVU420, };

+static const uint32_t rotation_formats[] = {

• DRM_FORMAT_NV12,
• /* TODO add formats after validation */

+};

• /*************************************************************
  • DPU sub blocks config
  *************************************************************/

@@ -465,7 +475,16 @@ static const struct dpu_ctl_cfg sc7280_ctl[] = {

/* SSPP common configuration */

-#define _VIG_SBLK(num, sdma_pri, qseed_ver) \ +static const struct dpu_rotation_cfg dpu_rot_cfg = {

• .version = INLINE_ROTATOR_V2,
• .rot_maxdwnscale_ratio_num = 1,
• .rot_maxdwnscale_ratio_dem = 1,
• .rot_maxheight = 1088,
• .rot_num_formats = ARRAY_SIZE(rotation_formats),
• .rot_format_list = rotation_formats,

+};

+#define _VIG_SBLK(num, sdma_pri, qseed_ver, rot_cfg) \ { \ .maxdwnscale = MAX_DOWNSCALE_RATIO, \ .maxupscale = MAX_UPSCALE_RATIO, \ @@ -482,6 +501,7 @@ static const struct dpu_ctl_cfg sc7280_ctl[] = { .num_formats = ARRAY_SIZE(plane_formats_yuv), \ .virt_format_list = plane_formats, \ .virt_num_formats = ARRAY_SIZE(plane_formats), \

• .rotation_cfg = rot_cfg, \ }

  #define _DMA_SBLK(num, sdma_pri) \

@@ -498,13 +518,13 @@ static const struct dpu_ctl_cfg sc7280_ctl[] = { }

static const struct dpu_sspp_sub_blks sdm845_vig_sblk_0 =

• 		_VIG_SBLK("0", 5, DPU_SSPP_SCALER_QSEED3);
  

• 		_VIG_SBLK("0", 5, DPU_SSPP_SCALER_QSEED3, 0);
  

  static const struct dpu_sspp_sub_blks sdm845_vig_sblk_1 =

• 		_VIG_SBLK("1", 6, DPU_SSPP_SCALER_QSEED3);
  

• 		_VIG_SBLK("1", 6, DPU_SSPP_SCALER_QSEED3, 0);
  

  static const struct dpu_sspp_sub_blks sdm845_vig_sblk_2 =

• 		_VIG_SBLK("2", 7, DPU_SSPP_SCALER_QSEED3);
  

• 		_VIG_SBLK("2", 7, DPU_SSPP_SCALER_QSEED3, 0);
  

  static const struct dpu_sspp_sub_blks sdm845_vig_sblk_3 =

• 		_VIG_SBLK("3", 8, DPU_SSPP_SCALER_QSEED3);
  

• 		_VIG_SBLK("3", 8, DPU_SSPP_SCALER_QSEED3, 0);
  
  

  static const struct dpu_sspp_sub_blks sdm845_dma_sblk_0 = _DMA_SBLK("8", 1); static const struct dpu_sspp_sub_blks sdm845_dma_sblk_1 = _DMA_SBLK("9", 2);

@@ -543,7 +563,10 @@ static const struct dpu_sspp_cfg sdm845_sspp[] = { };

static const struct dpu_sspp_sub_blks sc7180_vig_sblk_0 =

• 		_VIG_SBLK("0", 4, DPU_SSPP_SCALER_QSEED4);
  

• 		_VIG_SBLK("0", 4, DPU_SSPP_SCALER_QSEED4, 0);
  

+static const struct dpu_sspp_sub_blks sc7280_vig_sblk_0 =

• 		_VIG_SBLK("0", 4, DPU_SSPP_SCALER_QSEED4, &dpu_rot_cfg);
  
  

  static const struct dpu_sspp_cfg sc7180_sspp[] = { SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_SC7180_MASK,

@@ -557,13 +580,13 @@ static const struct dpu_sspp_cfg sc7180_sspp[] = { };

static const struct dpu_sspp_sub_blks sm8250_vig_sblk_0 =

• 		_VIG_SBLK("0", 5, DPU_SSPP_SCALER_QSEED3LITE);
  

• 		_VIG_SBLK("0", 5, DPU_SSPP_SCALER_QSEED3LITE, 0);
  

  static const struct dpu_sspp_sub_blks sm8250_vig_sblk_1 =

• 		_VIG_SBLK("1", 6, DPU_SSPP_SCALER_QSEED3LITE);
  

• 		_VIG_SBLK("1", 6, DPU_SSPP_SCALER_QSEED3LITE, 0);
  

  static const struct dpu_sspp_sub_blks sm8250_vig_sblk_2 =

• 		_VIG_SBLK("2", 7, DPU_SSPP_SCALER_QSEED3LITE);
  

• 		_VIG_SBLK("2", 7, DPU_SSPP_SCALER_QSEED3LITE, 0);
  

  static const struct dpu_sspp_sub_blks sm8250_vig_sblk_3 =

• 		_VIG_SBLK("3", 8, DPU_SSPP_SCALER_QSEED3LITE);
  

• 		_VIG_SBLK("3", 8, DPU_SSPP_SCALER_QSEED3LITE, 0);
  
  

  static const struct dpu_sspp_cfg sm8250_sspp[] = { SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_SM8250_MASK,

@@ -585,8 +608,8 @@ static const struct dpu_sspp_cfg sm8250_sspp[] = { };

static const struct dpu_sspp_cfg sc7280_sspp[] = {

• SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_SC7180_MASK,

• sc7180_vig_sblk_0, 0,  SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0),
  

• SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_SC7280_MASK,

• sc7280_vig_sblk_0, 0,  SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0),
  

  SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000, DMA_SDM845_MASK, sdm845_dma_sblk_0, 1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0), SSPP_BLK("sspp_9", SSPP_DMA1, 0x26000, DMA_CURSOR_SDM845_MASK,

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h index d2a945a..8421001 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h @@ -129,6 +129,7 @@ enum { DPU_SSPP_TS_PREFILL, DPU_SSPP_TS_PREFILL_REC1, DPU_SSPP_CDP,

• DPU_SSPP_INLINE_ROTATION, DPU_SSPP_MAX };

@@ -309,6 +310,24 @@ struct dpu_qos_lut_tbl { };

/**

• • struct dpu_rotation_cfg - define inline rotation config
• • @version: Inline rotation version
• • @rot_maxdwnscale_ratio_num: max downscale ratio for rotation numerator
• • @rot_maxdwnscale_ratio_dem: max downscale ratio for denominator
• • @rot_maxheight: max pre rotated height allowed for rotation
• • @rot_num_formats: count of the formats
• • @rot_format_list: list of supported rotator formats
• */

+struct dpu_rotation_cfg {

• u32 version;
• u32 rot_maxdwnscale_ratio_num;
• u32 rot_maxdwnscale_ratio_dem;
• u32 rot_maxheight;
• u32 rot_num_formats;
• const u32 *rot_format_list;

+};

+/**

• struct dpu_caps - define DPU capabilities
• @max_mixer_width max layer mixer line width support.
• @max_mixer_blendstages max layer mixer blend stages or

@@ -384,6 +403,7 @@ struct dpu_sspp_sub_blks { u32 num_formats; const u32 *virt_format_list; u32 virt_num_formats;

• const struct dpu_rotation_cfg *rotation_cfg; };

  /**

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c index ec4a6f0..0daee63 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c @@ -539,16 +539,28 @@ static void _dpu_plane_set_scanout(struct drm_plane *plane,

static void _dpu_plane_setup_scaler3(struct dpu_plane *pdpu, struct dpu_plane_state *pstate,

• uint32_t src_w, uint32_t src_h, uint32_t dst_w, uint32_t dst_h,
  

  struct dpu_hw_scaler3_cfg *scale_cfg, const struct dpu_format *fmt, uint32_t chroma_subsmpl_h, uint32_t chroma_subsmpl_v) { uint32_t i;

• bool inline_rotation = (pstate->rotation & DRM_MODE_ROTATE_90);

• uint32_t src_w = drm_rect_width(&pdpu->pipe_cfg.src_rect);

• uint32_t src_h = drm_rect_height(&pdpu->pipe_cfg.src_rect);

• uint32_t dst_w = drm_rect_width(&pdpu->pipe_cfg.dst_rect);

• uint32_t dst_h = drm_rect_height(&pdpu->pipe_cfg.dst_rect);

  memset(scale_cfg, 0, sizeof(*scale_cfg)); memset(&pstate->pixel_ext, 0, sizeof(struct dpu_hw_pixel_ext));

• /*

• * For inline rotation cases, scaler config is post-rotation,
  

• * so swap the dimensions here. However, pixel extension will
  

• * need pre-rotation settings.
  

• */
  

• if (inline_rotation)

• swap(src_w, src_h);
  

• scale_cfg->phase_step_x[DPU_SSPP_COMP_0] = mult_frac((1 << PHASE_STEP_SHIFT), src_w, dst_w); scale_cfg->phase_step_y[DPU_SSPP_COMP_0] =

@@ -587,10 +599,10 @@ static void _dpu_plane_setup_scaler3(struct dpu_plane *pdpu, scale_cfg->preload_y[i] = DPU_QSEED3_DEFAULT_PRELOAD_V; }

• pstate->pixel_ext.num_ext_pxls_top[i] =
  

• 	scale_cfg->src_height[i];
  

• pstate->pixel_ext.num_ext_pxls_left[i] =
  

• 	scale_cfg->src_width[i];
  

• pstate->pixel_ext.num_ext_pxls_top[i] = inline_rotation ?
  

• 	scale_cfg->src_width[i] : scale_cfg->src_height[i];
  

• pstate->pixel_ext.num_ext_pxls_left[i] = inline_rotation ?
  

• 	scale_cfg->src_height[i] : scale_cfg->src_width[i];
  

  } if (!(DPU_FORMAT_IS_YUV(fmt)) && (src_h == dst_h) && (src_w == dst_w))

@@ -662,10 +674,6 @@ static void _dpu_plane_setup_scaler(struct dpu_plane *pdpu, /* don't chroma subsample if decimating */ /* update scaler. calculate default config for QSEED3 */ _dpu_plane_setup_scaler3(pdpu, pstate,

• 	drm_rect_width(&pdpu->pipe_cfg.src_rect),
  

• 	drm_rect_height(&pdpu->pipe_cfg.src_rect),
  

• 	drm_rect_width(&pdpu->pipe_cfg.dst_rect),
  

• 	drm_rect_height(&pdpu->pipe_cfg.dst_rect),
  &pstate->scaler3_cfg, fmt,
  info->hsub, info->vsub);
  

  }

@@ -959,6 +967,7 @@ static int dpu_plane_atomic_check(struct drm_plane *plane, const struct dpu_format *fmt; struct drm_rect src, dst, fb_rect = { 0 }; uint32_t min_src_size, max_linewidth;

• unsigned int rotation;

  if (new_plane_state->crtc) crtc_state = drm_atomic_get_new_crtc_state(state,

@@ -1028,6 +1037,48 @@ static int dpu_plane_atomic_check(struct drm_plane *plane, return -E2BIG; }

• rotation = drm_rotation_simplify(new_plane_state->rotation,

• 	    DRM_MODE_ROTATE_0 |
  

• 	    DRM_MODE_ROTATE_90 |
  

• 	    DRM_MODE_REFLECT_X |
  

• 	    DRM_MODE_REFLECT_Y);
  

• if (rotation & DRM_MODE_ROTATE_90) {

• struct msm_drm_private *priv = plane->dev->dev_private;
  

• struct dpu_kms *dpu_kms;
  

• const struct msm_format *msm_fmt;
  

• const struct dpu_format *fmt;
  

• bool found = false;
  

• u32 i, num_formats;
  

• const u32 *supported_formats;
  

• if (src.y2 > pdpu->pipe_sblk->rotation_cfg->rot_maxheight) {
  

Another note: drm_rect_width(&src) rather than src.y2 here.

• 	DPU_DEBUG_PLANE(pdpu,
  

• 	"invalid height for inline rot:%d max:%d\n",
  

• 	src.y2, pdpu->pipe_sblk->rotation_cfg->rot_maxheight);
  

• 	return -EINVAL;
  

• }
  

• /* check for valid formats supported by inline rotation */
  

• dpu_kms = to_dpu_kms(priv->kms);
  

• msm_fmt = msm_framebuffer_format(new_plane_state->fb);
  

• fmt = to_dpu_format(msm_fmt);
  

• supported_formats = pdpu->pipe_sblk->rotation_cfg->rot_format_list;
  

• num_formats = pdpu->pipe_sblk->rotation_cfg->rot_num_formats;
  

• for (i = 0; i < num_formats; i++) {
  

• 	if (fmt->base.pixel_format == supported_formats[i] &&
  

• 		fmt->fetch_mode == DPU_FETCH_UBWC)
  

• 		found = true;
  

• }
  

• if (!found || !num_formats) {
  

• 	DPU_DEBUG_PLANE(pdpu,
  

• 	"supported_format not found num:%d\n", num_formats);
  

• 	return -EINVAL;
  

• }
  

• }

• pstate->rotation = rotation; pstate->needs_qos_remap = drm_atomic_crtc_needs_modeset(crtc_state);

  return 0;

@@ -1153,21 +1204,18 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane) pstate->multirect_mode);

if (pdpu->pipe_hw->ops.setup_format) {

• unsigned int rotation;
  
  

  src_flags = 0x0;

• rotation = drm_rotation_simplify(state->rotation,
  

• 				 DRM_MODE_ROTATE_0 |
  

• 				 DRM_MODE_REFLECT_X |
  

• 				 DRM_MODE_REFLECT_Y);
  

• if (rotation & DRM_MODE_REFLECT_X)
  

• if (pstate->rotation & DRM_MODE_REFLECT_X)
  src_flags |= DPU_SSPP_FLIP_LR;
  
  

• if (rotation & DRM_MODE_REFLECT_Y)
  

• if (pstate->rotation & DRM_MODE_REFLECT_Y)
  src_flags |= DPU_SSPP_FLIP_UD;
  
  

• if (pstate->rotation & DRM_MODE_ROTATE_90)
  

• 	src_flags |= DPU_SSPP_ROT_90;
  

• /* update format */ pdpu->pipe_hw->ops.setup_format(pdpu->pipe_hw, fmt, src_flags, pstate->multirect_index);

@@ -1578,6 +1626,8 @@ struct drm_plane *dpu_plane_init(struct drm_device *dev, int zpos_max = DPU_ZPOS_MAX; uint32_t num_formats; int ret = -EINVAL;

• unsigned int supported_rotations = DRM_MODE_ROTATE_0 |

• 	DRM_MODE_ROTATE_180 | DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y;
  
  

  /* create and zero local structure */ pdpu = kzalloc(sizeof(*pdpu), GFP_KERNEL);

@@ -1647,12 +1697,11 @@ struct drm_plane *dpu_plane_init(struct drm_device *dev, if (ret) DPU_ERROR("failed to install zpos property, rc = %d\n", ret);

• if (pdpu->features & BIT(DPU_SSPP_INLINE_ROTATION))

• supported_rotations |= DRM_MODE_ROTATE_90;
  

• drm_plane_create_rotation_property(plane,

• 	DRM_MODE_ROTATE_0,
  

• 	DRM_MODE_ROTATE_0 |
  

• 	DRM_MODE_ROTATE_180 |
  

• 	DRM_MODE_REFLECT_X |
  

• 	DRM_MODE_REFLECT_Y);
  

•     DRM_MODE_ROTATE_0, supported_rotations);
  
  

  drm_plane_enable_fb_damage_clips(plane);

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h index 34e03ac..16ec8dc 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h @@ -28,6 +28,7 @@

• @cdp_cfg: CDP configuration
• @plane_fetch_bw: calculated BW per plane
• @plane_clk: calculated clk per plane

• • @rotation: simplified drm rotation hint
  */ struct dpu_plane_state { struct drm_plane_state base;

@@ -45,6 +46,7 @@ struct dpu_plane_state { struct dpu_hw_pipe_cdp_cfg cdp_cfg; u64 plane_fetch_bw; u64 plane_clk;

• unsigned int rotation; };

  /**