From: John Stultz john.stultz@linaro.org
commit 3587c856675c45809010c2cee5b21096f6e8e938 upstream.
I've found that by just turning the chip on and off via the POWER_DOWN register, I end up getting i2c_transfer errors on HiKey.
Investigating further, it turns out that some of the register state in hardware is getting lost, as the device registers are reset when the chip is powered down.
Thus this patch simply re-writes the i2c address to the ADV7511_REG_EDID_I2C_ADDR register to ensure its properly set before we try to read the EDID data.
Cc: David Airlie airlied@linux.ie Cc: Archit Taneja architt@codeaurora.org Cc: Wolfram Sang wsa+renesas@sang-engineering.com Cc: Lars-Peter Clausen lars@metafoo.de Cc: Laurent Pinchart laurent.pinchart@ideasonboard.com Cc: dri-devel@lists.freedesktop.org Cc: stable@vger.kernel.org Reviewed-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Tested-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Signed-off-by: John Stultz john.stultz@linaro.org Signed-off-by: Archit Taneja architt@codeaurora.org Signed-off-by: Thong Ho thong.ho.px@rvc.renesas.com Signed-off-by: Nhan Nguyen nhan.nguyen.yb@renesas.com Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-7-git-send-ema... --- drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c index 17b9e98..f75ab62 100644 --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c @@ -573,9 +573,17 @@ static int adv7511_get_modes(struct adv7511 *adv7511, unsigned int count;
/* Reading the EDID only works if the device is powered */ - if (!adv7511->powered) + if (!adv7511->powered) { + unsigned int edid_i2c_addr = + (adv7511->i2c_main->addr << 1) + 4; + __adv7511_power_on(adv7511);
+ /* Reset the EDID_I2C_ADDR register as it might be cleared */ + regmap_write(adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR, + edid_i2c_addr); + } + edid = drm_do_get_edid(connector, adv7511_get_edid_block, adv7511);
if (!adv7511->powered)