The backlight power is controlled through the reg_bl_12v0 regulator.
Co-Developed-by: Robin van der Gracht robin@protonic.nl Signed-off-by: Robin van der Gracht robin@protonic.nl Signed-off-by: Oleksij Rempel o.rempel@pengutronix.de --- arch/arm/boot/dts/imx6dl-prtvt7.dts | 9 --------- 1 file changed, 9 deletions(-)
diff --git a/arch/arm/boot/dts/imx6dl-prtvt7.dts b/arch/arm/boot/dts/imx6dl-prtvt7.dts index 836026a0e219..8a1491975da8 100644 --- a/arch/arm/boot/dts/imx6dl-prtvt7.dts +++ b/arch/arm/boot/dts/imx6dl-prtvt7.dts @@ -21,14 +21,11 @@ memory@10000000 {
backlight_lcd: backlight-lcd { compatible = "pwm-backlight"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_backlight>; pwms = <&pwm1 0 500000>; brightness-levels = <0 20 81 248 1000>; default-brightness-level = <20>; num-interpolated-steps = <21>; power-supply = <®_bl_12v0>; - enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; };
display { @@ -362,12 +359,6 @@ MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 >; };
- pinctrl_backlight: backlightgrp { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28 0x1b0b0 - >; - }; - pinctrl_can1phy: can1phy { fsl,pins = < /* CAN1_SR */