Enable backlight support for eDP panel on CRD platform for sc7280.
Signed-off-by: Sankeerth Billakanti quic_sbillaka@quicinc.com ---
Changes in v5: - Separate out backlight nodes
arch/arm64/boot/dts/qcom/sc7280-crd.dts | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-crd.dts index 2df654e..16d1a5b 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-crd.dts @@ -37,6 +37,15 @@ pinctrl-0 = <&edp_panel_power>; };
+ edp_backlight: edp-backlight { + compatible = "pwm-backlight"; + + power-supply = <&vreg_edp_bp>; + pwms = <&pm8350c_pwm 3 65535>; + + enable-gpios = <&pm8350c_gpios 7 GPIO_ACTIVE_HIGH>; + }; + vreg_edp_bp: vreg-edp-bp-regulator { compatible = "regulator-fixed"; regulator-name = "vreg_edp_bp"; @@ -123,7 +132,9 @@ ap_ts_pen_1v8: &i2c13 { edp_panel: edp-panel { compatible = "edp-panel";
+ backlight = <&edp_backlight>; power-supply = <&edp_3v3_regulator>; + ports { #address-cells = <1>; #size-cells = <0>; @@ -172,6 +183,13 @@ ap_ts_pen_1v8: &i2c13 { }; };
+&pm8350c_pwm { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&edp_bl_pwm>; +}; + &tlmm { edp_panel_power: edp-panel-power { pins = "gpio80";