K2G EVM has an SiI902x HDMI encoder on the board, and a separately purchasable LCD which can be attached to the board. Only one of these displays can be used at a time, and two dip-switches need to be changed when switching to another display.
The HDMI support is added to the base k2g-evm.dts file, and the LCD support is added as a separate k2g-evm-lcd.dts file. The user must choose one of the dtbs, depending on which display he wants to use.
Signed-off-by: Tomi Valkeinen tomi.valkeinen@ti.com Cc: devicetree@vger.kernel.org --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/keystone-k2g-evm-lcd.dts | 80 ++++++++++++++++++++ arch/arm/boot/dts/keystone-k2g-evm.dts | 87 ++++++++++++++++++++++ 3 files changed, 168 insertions(+) create mode 100644 arch/arm/boot/dts/keystone-k2g-evm-lcd.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 7e2424957809..11bb3ba22bdf 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -222,6 +222,7 @@ dtb-$(CONFIG_ARCH_KEYSTONE) += \ keystone-k2l-evm.dtb \ keystone-k2e-evm.dtb \ keystone-k2g-evm.dtb \ + keystone-k2g-evm-lcd.dtb \ keystone-k2g-ice.dtb dtb-$(CONFIG_MACH_KIRKWOOD) += \ kirkwood-b3.dtb \ diff --git a/arch/arm/boot/dts/keystone-k2g-evm-lcd.dts b/arch/arm/boot/dts/keystone-k2g-evm-lcd.dts new file mode 100644 index 000000000000..be0498010e71 --- /dev/null +++ b/arch/arm/boot/dts/keystone-k2g-evm-lcd.dts @@ -0,0 +1,80 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for K2G EVM with LCD Display + * + * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/ + */ + +#include "keystone-k2g-evm.dts" +#include <dt-bindings/pwm/pwm.h> + +/ { + lcd0: display { + compatible = "newhaven,nhd-4.3-480272ef-atxl", "panel-dpi"; + label = "lcd"; + + backlight = <&lcd_bl>; + + panel-timing { + clock-frequency = <9000000>; + hactive = <480>; + vactive = <272>; + hfront-porch = <2>; + hback-porch = <2>; + hsync-len = <41>; + vfront-porch = <2>; + vback-porch = <2>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; + + lcd_bl: backlight { + compatible = "pwm-backlight"; + pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 32 64 96 128 160 192 224 255>; + default-brightness-level = <8>; + }; +}; + +&i2c1 { + edt-ft5306@38 { + status = "okay"; + compatible = "edt,edt-ft5306", "edt,edt-ft5x06"; + reg = <0x38>; + + pinctrl-names = "default"; + pinctrl-0 = <&edt_ft5306_ts_pins>; + + interrupt-parent = <&gpio1>; + interrupts = <42 IRQ_TYPE_EDGE_FALLING>; + + touchscreen-size-x = <480>; + touchscreen-size-y = <272>; + }; +}; + +&k2g_pinctrl { + edt_ft5306_ts_pins: edt_ft5306_ts_pins { + pinctrl-single,pins = < + K2G_CORE_IOPAD(0x1364) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE3) /* pr1_pru1_gpo16.gpio1_42 */ + >; + }; +}; + +&dpi_out { + remote-endpoint = <&lcd_in>; +}; + +&sii9022 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts index 6a4657799b99..b232e3b30d76 100644 --- a/arch/arm/boot/dts/keystone-k2g-evm.dts +++ b/arch/arm/boot/dts/keystone-k2g-evm.dts @@ -81,6 +81,13 @@ >; };
+ i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + K2G_CORE_IOPAD(0x1384) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* i2c1_scl.i2c1_scl */ + K2G_CORE_IOPAD(0x1388) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* i2c1_sda.i2c1_sda */ + >; + }; + ecap0_pins: ecap0_pins { pinctrl-single,pins = < K2G_CORE_IOPAD(0x1374) (BUFFER_CLASS_B | MUX_MODE4) /* pr1_mdio_data.ecap0_in_apwm0_out */ @@ -114,6 +121,46 @@ K2G_CORE_IOPAD(0x11f0) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE0) /* uart2_txd.uart2_txd */ >; }; + + vout_pins: pinmux_vout_pins { + pinctrl-single,pins = < + K2G_CORE_IOPAD(0x1078) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata23.dssdata23 */ + K2G_CORE_IOPAD(0x107c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata22.dssdata22 */ + K2G_CORE_IOPAD(0x1080) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata21.dssdata21 */ + K2G_CORE_IOPAD(0x1084) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata20.dssdata20 */ + K2G_CORE_IOPAD(0x1088) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata19.dssdata19 */ + K2G_CORE_IOPAD(0x108c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata18.dssdata18 */ + K2G_CORE_IOPAD(0x1090) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata17.dssdata17 */ + K2G_CORE_IOPAD(0x1094) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata16.dssdata16 */ + K2G_CORE_IOPAD(0x1098) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata15.dssdata15 */ + K2G_CORE_IOPAD(0x109c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata14.dssdata14 */ + K2G_CORE_IOPAD(0x10a0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata13.dssdata13 */ + K2G_CORE_IOPAD(0x10a4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata12.dssdata12 */ + K2G_CORE_IOPAD(0x10a8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata11.dssdata11 */ + K2G_CORE_IOPAD(0x10ac) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata10.dssdata10 */ + K2G_CORE_IOPAD(0x10b0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata9.dssdata9 */ + K2G_CORE_IOPAD(0x10b4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata8.dssdata8 */ + K2G_CORE_IOPAD(0x10b8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata7.dssdata7 */ + K2G_CORE_IOPAD(0x10bc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata6.dssdata6 */ + K2G_CORE_IOPAD(0x10c0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata5.dssdata5 */ + K2G_CORE_IOPAD(0x10c4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata4.dssdata4 */ + K2G_CORE_IOPAD(0x10c8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata3.dssdata3 */ + K2G_CORE_IOPAD(0x10cc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata2.dssdata2 */ + K2G_CORE_IOPAD(0x10d0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata1.dssdata1 */ + K2G_CORE_IOPAD(0x10d4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata0.dssdata0 */ + K2G_CORE_IOPAD(0x10d8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssvsync.dssvsync */ + K2G_CORE_IOPAD(0x10dc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dsshsync.dsshsync */ + K2G_CORE_IOPAD(0x10e0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dsspclk.dsspclk */ + K2G_CORE_IOPAD(0x10e4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssde.dssde */ + K2G_CORE_IOPAD(0x10e8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssfid.dssfid */ + >; + }; + + sii9022_pins: sii9022_pins { + pinctrl-single,pins = < + K2G_CORE_IOPAD(0x1338) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE3) /* pr1_pru1_gpo5.gpio1_31 */ + >; + }; };
&uart0 { @@ -268,3 +315,43 @@ pinctrl-0 = <&uart2_pins>; status = "okay"; }; + +&dss { + pinctrl-names = "default"; + pinctrl-0 = <&vout_pins>; + status = "ok"; + + port { + dpi_out: endpoint { + remote-endpoint = <&sii9022_in>; + }; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "okay"; + clock-frequency = <400000>; + + sii9022: sii9022@3b { + compatible = "sil,sii9022"; + reg = <0x3b>; + + pinctrl-names = "default"; + pinctrl-0 = <&sii9022_pins>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sii9022_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; + }; +};