v4 was: http://lists.freedesktop.org/archives/dri-devel/2013-September/045340.html
Changes from v4:
- The kernel is now in charge of adjusting the stereo mode timings. - There is a per-connector opt-in boolean to expose stereo modes, letting people enable stereo for each driver/connector. - The series now depends on the latest bits from the drm-intel tree - Removed the 2 buffers check that was judged unnecessary - I realized that for frame packing modes (where you have to adjust the vdisplay to be 2 * vdisplay + vblank) with a NTSC clock I was reconstructing the clock without adjusting it by 1000 / 1001. Now that the timing computation is in the kernel, fixed it there. - I also checked that we correctly match against the 2D CEA mode for the AVI infoframes. The last bit to make it work was the introduction of crtc_clock to separate the original clock from the one computed by drm_mode_set_crtcinfo() - And finally, I booted with i915.fastboot=1 and discovered that the pipe_src register was getting clobbered, so fixed that as well