Hi Paul.
As already said on irc, maybe add:
"The generic bindings for the SPI slaves documented in [1] also applies" as we see other binding using spi already does.
Looking at: sitronix,st7789v.txt should reg also be specified as required here?
Sam
On Sun, Jun 02, 2019 at 06:48:43PM +0200, Paul Cercueil wrote:
The KD035G6-54NT is a 3.5" 320x240 24-bit TFT LCD panel.
Signed-off-by: Paul Cercueil paul@crapouillou.net
.../panel/kingdisplay,kd035g6-54nt.txt | 27 +++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.txt
diff --git a/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.txt b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.txt new file mode 100644 index 000000000000..a6e4a9af4925 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.txt @@ -0,0 +1,27 @@ +King Display KD035G6-54NT 3.5" (320x240 pixels) 24-bit TFT LCD panel
+Required properties: +- compatible: should be "kingdisplay,kd035g6-54nt" +- power-supply: See panel-common.txt +- reset-gpios: See panel-common.txt
+Optional properties: +- backlight: see panel-common.txt
+Example:
+&spi {
- display-panel {
compatible = "kingdisplay,kd035g6-54nt";reg = <0>;spi-max-frequency = <3125000>;spi-3wire;spi-cs-high;reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;backlight = <&backlight>;power-supply = <&ldo6>;- };
+};
2.21.0.593.g511ec345e18