In case there is a bridge connected to the LCDIF, use bus_format from the bridge, otherwise behave as before and use bus_format from the connector. This way, even if there are multiple bridges in the display pipeline, the LCDIF will use the correct format.
Signed-off-by: Marek Vasut marex@denx.de Cc: Daniel Abrecht public@danielabrecht.ch Cc: Emil Velikov emil.l.velikov@gmail.com Cc: Laurent Pinchart laurent.pinchart@ideasonboard.com Cc: Lucas Stach l.stach@pengutronix.de Cc: Stefan Agner stefan@agner.ch --- drivers/gpu/drm/mxsfb/mxsfb_kms.c | 33 +++++++++++++++++++++++-------- 1 file changed, 25 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/mxsfb/mxsfb_kms.c b/drivers/gpu/drm/mxsfb/mxsfb_kms.c index 5bcc06c1ac0b..98d8ba0bae84 100644 --- a/drivers/gpu/drm/mxsfb/mxsfb_kms.c +++ b/drivers/gpu/drm/mxsfb/mxsfb_kms.c @@ -47,16 +47,13 @@ static u32 set_hsync_pulse_width(struct mxsfb_drm_private *mxsfb, u32 val) * Setup the MXSFB registers for decoding the pixels out of the framebuffer and * outputting them on the bus. */ -static void mxsfb_set_formats(struct mxsfb_drm_private *mxsfb) +static void mxsfb_set_formats(struct mxsfb_drm_private *mxsfb, + const u32 bus_format) { struct drm_device *drm = mxsfb->drm; const u32 format = mxsfb->crtc.primary->state->fb->format->format; - u32 bus_format = MEDIA_BUS_FMT_RGB888_1X24; u32 ctrl, ctrl1;
- if (mxsfb->connector->display_info.num_bus_formats) - bus_format = mxsfb->connector->display_info.bus_formats[0]; - DRM_DEV_DEBUG_DRIVER(drm->dev, "Using bus_format: 0x%08X\n", bus_format);
@@ -222,7 +219,8 @@ static dma_addr_t mxsfb_get_fb_paddr(struct drm_plane *plane) return gem->paddr; }
-static void mxsfb_crtc_mode_set_nofb(struct mxsfb_drm_private *mxsfb) +static void mxsfb_crtc_mode_set_nofb(struct mxsfb_drm_private *mxsfb, + const u32 bus_format) { struct drm_device *drm = mxsfb->crtc.dev; struct drm_display_mode *m = &mxsfb->crtc.state->adjusted_mode; @@ -247,7 +245,7 @@ static void mxsfb_crtc_mode_set_nofb(struct mxsfb_drm_private *mxsfb) if (mxsfb->devdata->has_overlay) writel(0, mxsfb->base + LCDC_AS_CTRL);
- mxsfb_set_formats(mxsfb); + mxsfb_set_formats(mxsfb, bus_format);
clk_set_rate(mxsfb->clk, m->crtc_clock * 1000);
@@ -345,7 +343,9 @@ static void mxsfb_crtc_atomic_enable(struct drm_crtc *crtc, struct drm_atomic_state *state) { struct mxsfb_drm_private *mxsfb = to_mxsfb_drm_private(crtc->dev); + struct drm_bridge_state *bridge_state; struct drm_device *drm = mxsfb->drm; + u32 bus_format = 0; dma_addr_t paddr;
pm_runtime_get_sync(drm->dev); @@ -353,7 +353,24 @@ static void mxsfb_crtc_atomic_enable(struct drm_crtc *crtc,
drm_crtc_vblank_on(crtc);
- mxsfb_crtc_mode_set_nofb(mxsfb); + /* If there is a bridge attached to the LCDIF, use its bus format */ + if (mxsfb->bridge && state) { + bridge_state = + drm_atomic_get_new_bridge_state(state, + mxsfb->bridge); + if (bridge_state) + bus_format = bridge_state->input_bus_cfg.format; + } + + /* If there is no bridge, use bus format from connector */ + if (!bus_format && mxsfb->connector->display_info.num_bus_formats) + bus_format = mxsfb->connector->display_info.bus_formats[0]; + + /* If all else fails, default to RGB888_1X24 */ + if (!bus_format) + bus_format = MEDIA_BUS_FMT_RGB888_1X24; + + mxsfb_crtc_mode_set_nofb(mxsfb, bus_format);
/* Write cur_buf as well to avoid an initial corrupt frame */ paddr = mxsfb_get_fb_paddr(crtc->primary);