The NEC NL8048HL11 is a 10.4cm WVGA (800x480) panel with a 24-bit RGB parallel data interface and an SPI control interface.
Signed-off-by: Laurent Pinchart laurent.pinchart@ideasonboard.com --- .../bindings/display/panel/nec,nl8048hl11.txt | 38 +++++++++++++++++++ 1 file changed, 38 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.txt
diff --git a/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.txt b/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.txt new file mode 100644 index 000000000000..a2559c74a45b --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.txt @@ -0,0 +1,38 @@ +NEC NL8048HL11 Panel +==================== + +The NEC NL8048HL11 is a 10.4cm WVGA (800x480) panel with a 24-bit RGB parallel +data interface and an SPI control interface. + +Required properties: +- compatible: Shall contain "nec,nl8048hl11". +- reset-gpios: The panel reset GPIO specifier. + +Optional properties: +- label: A symbolic name for the panel. + +Required nodes: +- Video port for DPI input + +The device node shall contain one 'port' child node corresponding to the DPI +input, with one child 'endpoint' node, according to the bindings defined in +[1]. + +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt + +Example +------- + +lcd-panel: panel@0 { + compatible = "nec,nl8048hl11"; + reg = <0>; + spi-max-frequency = <10000000>; + + reset-gpios = <&gpio7 7 GPIO_ACTIVE_LOW>; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; +};