On Wed, 2020-10-14 at 12:44 +0800, CK Hu wrote:
Hi, Chunfeng:
On Tue, 2020-10-13 at 16:52 +0800, Chunfeng Yun wrote:
Convert HDMI PHY binding to YAML schema mediatek,ufs-phy.yaml
Signed-off-by: Chunfeng Yun chunfeng.yun@mediatek.com
v2: fix binding check warning of reg in example
.../display/mediatek/mediatek,hdmi.txt | 17 +--- .../bindings/phy/mediatek,hdmi-phy.yaml | 90 +++++++++++++++++++ 2 files changed, 91 insertions(+), 16 deletions(-) create mode 100644 Documentation/devicetree/bindings/phy/mediatek,hdmi-phy.yaml
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt index 7b124242b0c5..edac18951a75 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt @@ -50,22 +50,7 @@ Required properties:
HDMI PHY
-The HDMI PHY serializes the HDMI encoder's three channel 10-bit parallel -output and drives the HDMI pads.
-Required properties: -- compatible: "mediatek,<chip>-hdmi-phy" -- reg: Physical base address and length of the module's registers -- clocks: PLL reference clock -- clock-names: must contain "pll_ref" -- clock-output-names: must be "hdmitx_dig_cts" on mt8173 -- #phy-cells: must be <0> -- #clock-cells: must be <0>
-Optional properties: -- mediatek,ibias: TX DRV bias current for <1.65Gbps, defaults to 0xa -- mediatek,ibias_up: TX DRV bias current for >1.65Gbps, defaults to 0x1c +See phy/mediatek,hdmi-phy.yaml
Example:
diff --git a/Documentation/devicetree/bindings/phy/mediatek,hdmi-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,hdmi-phy.yaml new file mode 100644 index 000000000000..77df50204606 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/mediatek,hdmi-phy.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2020 MediaTek +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/mediatek,hdmi-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml#
+title: MediaTek High Definition Multimedia Interface (HDMI) PHY binding
+maintainers:
- CK Hu ck.hu@mediatek.com
I think you should remove "CK Hu ck.hu@mediatek.com" and add latest mediatek drm maintainer:
Ok, will do it, thanks
DRM DRIVERS FOR MEDIATEK M: Chun-Kuang Hu chunkuang.hu@kernel.org M: Philipp Zabel p.zabel@pengutronix.de L: dri-devel@lists.freedesktop.org S: Supported F: Documentation/devicetree/bindings/display/mediatek/ F: drivers/gpu/drm/mediatek/
Regards, CK