Try to document the object caching related bits, like cache_coherent and cache_dirty.
v2(Ville): - As pointed out by Ville, fix the completely incorrect assumptions about the "partial" coherency on shared LLC platforms. v3(Daniel): - Fix nonsense about "dirtying" the cache with reads. v4(Daniel): - Various improvements, including adding some more details for WT.
Suggested-by: Daniel Vetter daniel.vetter@ffwll.ch Signed-off-by: Matthew Auld matthew.auld@intel.com Cc: Ville Syrjälä ville.syrjala@linux.intel.com Cc: Mika Kuoppala mika.kuoppala@linux.intel.com Reviewed-by: Daniel Vetter daniel.vetter@ffwll.ch --- .../gpu/drm/i915/gem/i915_gem_object_types.h | 187 +++++++++++++++++- drivers/gpu/drm/i915/i915_drv.h | 9 - 2 files changed, 183 insertions(+), 13 deletions(-)
diff --git a/drivers/gpu/drm/i915/gem/i915_gem_object_types.h b/drivers/gpu/drm/i915/gem/i915_gem_object_types.h index afbadfc5516b..79de925aecfd 100644 --- a/drivers/gpu/drm/i915/gem/i915_gem_object_types.h +++ b/drivers/gpu/drm/i915/gem/i915_gem_object_types.h @@ -92,6 +92,86 @@ struct drm_i915_gem_object_ops { const char *name; /* friendly name for debug, e.g. lockdep classes */ };
+/** + * enum i915_cache_level - The supported GTT caching values for system memory + * pages. + * + * These translate to some special GTT PTE bits when binding pages into some + * address space. It also determines whether an object, or rather its pages are + * coherent with the GPU, when also reading or writing through the CPU cache + * with those pages. + * + * Userspace can also control this through struct drm_i915_gem_caching. + */ +enum i915_cache_level { + /** + * @I915_CACHE_NONE: + * + * GPU access is not coherent with the CPU cache. If the cache is dirty + * and we need the underlying pages to be coherent with some later GPU + * access then we need to manually flush the pages. + * + * On shared LLC platforms reads and writes through the CPU cache are + * still coherent even with this setting. See also + * &drm_i915_gem_object.cache_coherent for more details. Due to this we + * should only ever use uncached for scanout surfaces, otherwise we end + * up over-flushing in some places. + * + * This is the default on non-LLC platforms. + */ + I915_CACHE_NONE = 0, + /** + * @I915_CACHE_LLC: + * + * GPU access is coherent with the CPU cache. If the cache is dirty, + * then the GPU will ensure that access remains coherent, when both + * reading and writing through the CPU cache. GPU writes can dirty the + * CPU cache. + * + * Not used for scanout surfaces. + * + * Applies to both platforms with shared LLC(HAS_LLC), and snooping + * based platforms(HAS_SNOOP). + * + * This is the default on shared LLC platforms. The only exception is + * scanout objects, where the display engine is not coherent with the + * CPU cache. For such objects I915_CACHE_NONE or I915_CACHE_WT is + * automatically applied by the kernel in pin_for_display, if userspace + * has not done so already. + */ + I915_CACHE_LLC, + /** + * @I915_CACHE_L3_LLC: + * + * Explicitly enable the Gfx L3 cache, with coherent LLC. + * + * The Gfx L3 sits between the domain specific caches, e.g + * sampler/render caches, and the larger LLC. LLC is coherent with the + * GPU, but L3 is only visible to the GPU, so likely needs to be flushed + * when the workload completes. + * + * Not used for scanout surfaces. + * + * Only exposed on some gen7 + GGTT. More recent hardware has dropped + * this explicit setting, where it should now be enabled by default. + */ + I915_CACHE_L3_LLC, + /** + * @I915_CACHE_WT: + * + * Write-through. Used for scanout surfaces. + * + * The GPU can utilise the caches, while still having the display engine + * be coherent with GPU writes, as a result we don't need to flush the + * CPU caches when moving out of the render domain. This is the default + * setting chosen by the kernel, if supported by the HW, otherwise we + * fallback to I915_CACHE_NONE. On the CPU side writes through the CPU + * cache still need to be flushed, to remain coherent with the display + * engine. + */ + I915_CACHE_WT, +}; + enum i915_map_type { I915_MAP_WB = 0, I915_MAP_WC, @@ -229,14 +309,113 @@ struct drm_i915_gem_object { unsigned int mem_flags; #define I915_BO_FLAG_STRUCT_PAGE BIT(0) /* Object backed by struct pages */ #define I915_BO_FLAG_IOMEM BIT(1) /* Object backed by IO memory */ - /* - * Is the object to be mapped as read-only to the GPU - * Only honoured if hardware has relevant pte bit + /** + * @cache_level: The desired GTT caching level. + * + * See enum i915_cache_level for possible values, along with what + * each does. */ unsigned int cache_level:3; - unsigned int cache_coherent:2; + /** + * @cache_coherent: + * + * Track whether the pages are coherent with the GPU if reading or + * writing through the CPU caches. The largely depends on the + * @cache_level setting. + * + * On platforms which don't have the shared LLC(HAS_SNOOP), like on Atom + * platforms, coherency must be explicitly requested with some special + * GTT caching bits(see enum i915_cache_level). When enabling coherency + * it does come at a performance and power cost on such platforms. On + * the flip side the kernel does not need to manually flush any buffers + * which need to be coherent with the GPU, if the object is not coherent + * i.e @cache_coherent is zero. + * + * On platforms that share the LLC with the CPU(HAS_LLC), all GT memory + * access will automatically snoop the CPU caches(even with CACHE_NONE). + * The one exception is when dealing with the display engine, like with + * scanout surfaces. To handle this the kernel will always flush the + * surface out of the CPU caches when preparing it for scanout. Also + * note that since scanout surfaces are only ever read by the display + * engine we only need to care about flushing any writes through the CPU + * cache, reads on the other hand will always be coherent. + * + * Something strange here is why @cache_coherent is not a simple + * boolean, i.e coherent vs non-coherent. The reasoning for this is back + * to the display engine not being fully coherent. As a result scanout + * surfaces will either be marked as I915_CACHE_NONE or I915_CACHE_WT. + * In the case of seeing I915_CACHE_NONE the kernel makes the assumption + * that this is likely a scanout surface, and will set @cache_coherent + * as only I915_BO_CACHE_COHERENT_FOR_READ, on platforms with the shared + * LLC. The kernel uses this to always flush writes through the CPU + * cache as early as possible, where it can, in effect keeping + * @cache_dirty clean, so we can potentially avoid stalling when + * flushing the surface just before doing the scanout. This does mean + * we might unnecessarily flush non-scanout objects in some places, but + * the default assumption is that all normal objects should be using + * I915_CACHE_LLC, at least on platforms with the shared LLC. + * + * Supported values: + * + * I915_BO_CACHE_COHERENT_FOR_READ: + * + * On shared LLC platforms, we use this for special scanout surfaces, + * where the display engine is not coherent with the CPU cache. As such + * we need to ensure we flush any writes before doing the scanout. As an + * optimisation we try to flush any writes as early as possible to avoid + * stalling later. + * + * Thus for scanout surfaces using I915_CACHE_NONE, on shared LLC + * platforms, we use: + * + * cache_coherent = I915_BO_CACHE_COHERENT_FOR_READ + * + * While for normal objects that are fully coherent, including special + * scanout surfaces marked as I915_CACHE_WT, we use: + * + * cache_coherent = I915_BO_CACHE_COHERENT_FOR_READ | + * I915_BO_CACHE_COHERENT_FOR_WRITE + * + * And then for objects that are not coherent at all we use: + * + * cache_coherent = 0 + * + * I915_BO_CACHE_COHERENT_FOR_WRITE: + * + * When writing through the CPU cache, the GPU is still coherent. Note + * that this also implies I915_BO_CACHE_COHERENT_FOR_READ. + */ #define I915_BO_CACHE_COHERENT_FOR_READ BIT(0) #define I915_BO_CACHE_COHERENT_FOR_WRITE BIT(1) + unsigned int cache_coherent:2; + + /** + * @cache_dirty: + * + * Track if we are we dirty with writes through the CPU cache for this + * object. As a result reading directly from main memory might yield + * stale data. + * + * This also ties into whether the kernel is tracking the object as + * coherent with the GPU, as per @cache_coherent, as it determines if + * flushing might be needed at various points. + * + * Another part of @cache_dirty is managing flushing when first + * acquiring the pages for system memory, at this point the pages are + * considered foreign, so the default assumption is that the cache is + * dirty, for example the page zeroing done by the kernel might leave + * writes though the CPU cache, or swapping-in, while the actual data in + * main memory is potentially stale. Note that this is a potential + * security issue when dealing with userspace objects and zeroing. Now, + * whether we actually need apply the big sledgehammer of flushing all + * the pages on acquire depends on if @cache_coherent is marked as + * I915_BO_CACHE_COHERENT_FOR_WRITE, i.e that the GPU will be coherent + * for both reads and writes though the CPU cache. + * + * Note that on shared LLC platforms we still apply the heavy flush for + * I915_CACHE_NONE objects, under the assumption that this is going to + * be used for scanout. + */ unsigned int cache_dirty:1;
/** diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index d118834a4ed9..f65e0441fc99 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -394,15 +394,6 @@ struct drm_i915_display_funcs { void (*read_luts)(struct intel_crtc_state *crtc_state); };
-enum i915_cache_level { - I915_CACHE_NONE = 0, - I915_CACHE_LLC, /* also used for snoopable memory on non-LLC */ - I915_CACHE_L3_LLC, /* gen7+, L3 sits between the domain specifc - caches, eg sampler/render caches, and the - large Last-Level-Cache. LLC is coherent with - the CPU, but L3 is only visible to the GPU. */ - I915_CACHE_WT, /* hsw:gt3e WriteThrough for scanouts */ -};
#define I915_COLOR_UNEVICTABLE (-1) /* a non-vma sharing the address space */