drm_panel-based drivers for the ACX565AKM, LB035Q02, LS037V7DW01, NL8048HL11, TD028TTEC1 and TD043MTEA1 are available, remove the omapdrm-specific drivers.
Signed-off-by: Laurent Pinchart laurent.pinchart@ideasonboard.com --- drivers/gpu/drm/omapdrm/displays/Kconfig | 38 - drivers/gpu/drm/omapdrm/displays/Makefile | 6 - .../displays/panel-lgphilips-lb035q02.c | 254 ------ .../omapdrm/displays/panel-nec-nl8048hl11.c | 271 ------- .../displays/panel-sharp-ls037v7dw01.c | 265 ------ .../omapdrm/displays/panel-sony-acx565akm.c | 766 ------------------ .../omapdrm/displays/panel-tpo-td028ttec1.c | 401 --------- .../omapdrm/displays/panel-tpo-td043mtea1.c | 513 ------------ .../gpu/drm/omapdrm/dss/omapdss-boot-init.c | 7 - 9 files changed, 2521 deletions(-) delete mode 100644 drivers/gpu/drm/omapdrm/displays/panel-lgphilips-lb035q02.c delete mode 100644 drivers/gpu/drm/omapdrm/displays/panel-nec-nl8048hl11.c delete mode 100644 drivers/gpu/drm/omapdrm/displays/panel-sharp-ls037v7dw01.c delete mode 100644 drivers/gpu/drm/omapdrm/displays/panel-sony-acx565akm.c delete mode 100644 drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c delete mode 100644 drivers/gpu/drm/omapdrm/displays/panel-tpo-td043mtea1.c
diff --git a/drivers/gpu/drm/omapdrm/displays/Kconfig b/drivers/gpu/drm/omapdrm/displays/Kconfig index bb73d49fc3e0..f2be594c7eff 100644 --- a/drivers/gpu/drm/omapdrm/displays/Kconfig +++ b/drivers/gpu/drm/omapdrm/displays/Kconfig @@ -7,42 +7,4 @@ config DRM_OMAP_PANEL_DSI_CM help Driver for generic DSI command mode panels.
-config DRM_OMAP_PANEL_SONY_ACX565AKM - tristate "ACX565AKM Panel" - depends on SPI && BACKLIGHT_CLASS_DEVICE - help - This is the LCD panel used on Nokia N900 - -config DRM_OMAP_PANEL_LGPHILIPS_LB035Q02 - tristate "LG.Philips LB035Q02 LCD Panel" - depends on SPI - help - LCD Panel used on the Gumstix Overo Palo35 - -config DRM_OMAP_PANEL_SHARP_LS037V7DW01 - tristate "Sharp LS037V7DW01 LCD Panel" - depends on BACKLIGHT_CLASS_DEVICE - help - LCD Panel used in TI's SDP3430 and EVM boards - -config DRM_OMAP_PANEL_TPO_TD028TTEC1 - tristate "TPO TD028TTEC1 LCD Panel" - depends on SPI - help - LCD panel used in Openmoko. - -config DRM_OMAP_PANEL_TPO_TD043MTEA1 - tristate "TPO TD043MTEA1 LCD Panel" - depends on SPI - help - LCD Panel used in OMAP3 Pandora - -config DRM_OMAP_PANEL_NEC_NL8048HL11 - tristate "NEC NL8048HL11 Panel" - depends on SPI - depends on BACKLIGHT_CLASS_DEVICE - help - This NEC NL8048HL11 panel is TFT LCD used in the - Zoom2/3/3630 sdp boards. - endmenu diff --git a/drivers/gpu/drm/omapdrm/displays/Makefile b/drivers/gpu/drm/omapdrm/displays/Makefile index 58ddfa9917f8..488ddf153613 100644 --- a/drivers/gpu/drm/omapdrm/displays/Makefile +++ b/drivers/gpu/drm/omapdrm/displays/Makefile @@ -1,8 +1,2 @@ # SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_DRM_OMAP_PANEL_DSI_CM) += panel-dsi-cm.o -obj-$(CONFIG_DRM_OMAP_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o -obj-$(CONFIG_DRM_OMAP_PANEL_LGPHILIPS_LB035Q02) += panel-lgphilips-lb035q02.o -obj-$(CONFIG_DRM_OMAP_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o -obj-$(CONFIG_DRM_OMAP_PANEL_TPO_TD028TTEC1) += panel-tpo-td028ttec1.o -obj-$(CONFIG_DRM_OMAP_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o -obj-$(CONFIG_DRM_OMAP_PANEL_NEC_NL8048HL11) += panel-nec-nl8048hl11.o diff --git a/drivers/gpu/drm/omapdrm/displays/panel-lgphilips-lb035q02.c b/drivers/gpu/drm/omapdrm/displays/panel-lgphilips-lb035q02.c deleted file mode 100644 index 51eb98e96cde..000000000000 --- a/drivers/gpu/drm/omapdrm/displays/panel-lgphilips-lb035q02.c +++ /dev/null @@ -1,254 +0,0 @@ -/* - * LG.Philips LB035Q02 LCD Panel driver - * - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ - * Author: Tomi Valkeinen tomi.valkeinen@ti.com - * Based on a driver by: Steve Sakoman steve@sakoman.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ - -#include <linux/module.h> -#include <linux/delay.h> -#include <linux/spi/spi.h> -#include <linux/mutex.h> -#include <linux/gpio.h> -#include <linux/gpio/consumer.h> - -#include "../dss/omapdss.h" - -static const struct videomode lb035q02_vm = { - .hactive = 320, - .vactive = 240, - - .pixelclock = 6500000, - - .hsync_len = 2, - .hfront_porch = 20, - .hback_porch = 68, - - .vsync_len = 2, - .vfront_porch = 4, - .vback_porch = 18, - - .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW, -}; - -struct panel_drv_data { - struct omap_dss_device dssdev; - - struct spi_device *spi; - - struct videomode vm; - - struct gpio_desc *enable_gpio; -}; - -#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev) - -static int lb035q02_write_reg(struct spi_device *spi, u8 reg, u16 val) -{ - struct spi_message msg; - struct spi_transfer index_xfer = { - .len = 3, - .cs_change = 1, - }; - struct spi_transfer value_xfer = { - .len = 3, - }; - u8 buffer[16]; - - spi_message_init(&msg); - - /* register index */ - buffer[0] = 0x70; - buffer[1] = 0x00; - buffer[2] = reg & 0x7f; - index_xfer.tx_buf = buffer; - spi_message_add_tail(&index_xfer, &msg); - - /* register value */ - buffer[4] = 0x72; - buffer[5] = val >> 8; - buffer[6] = val; - value_xfer.tx_buf = buffer + 4; - spi_message_add_tail(&value_xfer, &msg); - - return spi_sync(spi, &msg); -} - -static void init_lb035q02_panel(struct spi_device *spi) -{ - /* Init sequence from page 28 of the lb035q02 spec */ - lb035q02_write_reg(spi, 0x01, 0x6300); - lb035q02_write_reg(spi, 0x02, 0x0200); - lb035q02_write_reg(spi, 0x03, 0x0177); - lb035q02_write_reg(spi, 0x04, 0x04c7); - lb035q02_write_reg(spi, 0x05, 0xffc0); - lb035q02_write_reg(spi, 0x06, 0xe806); - lb035q02_write_reg(spi, 0x0a, 0x4008); - lb035q02_write_reg(spi, 0x0b, 0x0000); - lb035q02_write_reg(spi, 0x0d, 0x0030); - lb035q02_write_reg(spi, 0x0e, 0x2800); - lb035q02_write_reg(spi, 0x0f, 0x0000); - lb035q02_write_reg(spi, 0x16, 0x9f80); - lb035q02_write_reg(spi, 0x17, 0x0a0f); - lb035q02_write_reg(spi, 0x1e, 0x00c1); - lb035q02_write_reg(spi, 0x30, 0x0300); - lb035q02_write_reg(spi, 0x31, 0x0007); - lb035q02_write_reg(spi, 0x32, 0x0000); - lb035q02_write_reg(spi, 0x33, 0x0000); - lb035q02_write_reg(spi, 0x34, 0x0707); - lb035q02_write_reg(spi, 0x35, 0x0004); - lb035q02_write_reg(spi, 0x36, 0x0302); - lb035q02_write_reg(spi, 0x37, 0x0202); - lb035q02_write_reg(spi, 0x3a, 0x0a0d); - lb035q02_write_reg(spi, 0x3b, 0x0806); -} - -static int lb035q02_connect(struct omap_dss_device *src, - struct omap_dss_device *dst) -{ - struct panel_drv_data *ddata = to_panel_data(dst); - - init_lb035q02_panel(ddata->spi); - - return 0; -} - -static void lb035q02_disconnect(struct omap_dss_device *src, - struct omap_dss_device *dst) -{ -} - -static void lb035q02_enable(struct omap_dss_device *dssdev) -{ - struct panel_drv_data *ddata = to_panel_data(dssdev); - - if (ddata->enable_gpio) - gpiod_set_value_cansleep(ddata->enable_gpio, 1); -} - -static void lb035q02_disable(struct omap_dss_device *dssdev) -{ - struct panel_drv_data *ddata = to_panel_data(dssdev); - - if (ddata->enable_gpio) - gpiod_set_value_cansleep(ddata->enable_gpio, 0); -} - -static int lb035q02_get_modes(struct omap_dss_device *dssdev, - struct drm_connector *connector) -{ - struct panel_drv_data *ddata = to_panel_data(dssdev); - - return omapdss_display_get_modes(connector, &ddata->vm); -} - -static const struct omap_dss_device_ops lb035q02_ops = { - .connect = lb035q02_connect, - .disconnect = lb035q02_disconnect, - - .enable = lb035q02_enable, - .disable = lb035q02_disable, - - .get_modes = lb035q02_get_modes, -}; - -static int lb035q02_probe_of(struct spi_device *spi) -{ - struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev); - struct gpio_desc *gpio; - - gpio = devm_gpiod_get(&spi->dev, "enable", GPIOD_OUT_LOW); - if (IS_ERR(gpio)) { - dev_err(&spi->dev, "failed to parse enable gpio\n"); - return PTR_ERR(gpio); - } - - ddata->enable_gpio = gpio; - - return 0; -} - -static int lb035q02_panel_spi_probe(struct spi_device *spi) -{ - struct panel_drv_data *ddata; - struct omap_dss_device *dssdev; - int r; - - ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL); - if (ddata == NULL) - return -ENOMEM; - - dev_set_drvdata(&spi->dev, ddata); - - ddata->spi = spi; - - r = lb035q02_probe_of(spi); - if (r) - return r; - - ddata->vm = lb035q02_vm; - - dssdev = &ddata->dssdev; - dssdev->dev = &spi->dev; - dssdev->ops = &lb035q02_ops; - dssdev->type = OMAP_DISPLAY_TYPE_DPI; - dssdev->display = true; - dssdev->owner = THIS_MODULE; - dssdev->of_port = 0; - dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES; - - /* - * Note: According to the panel documentation: - * DE is active LOW - * DATA needs to be driven on the FALLING edge - */ - dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH - | DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE - | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE; - - omapdss_display_init(dssdev); - omapdss_device_register(dssdev); - - return 0; -} - -static int lb035q02_panel_spi_remove(struct spi_device *spi) -{ - struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev); - struct omap_dss_device *dssdev = &ddata->dssdev; - - omapdss_device_unregister(dssdev); - - lb035q02_disable(dssdev); - - return 0; -} - -static const struct of_device_id lb035q02_of_match[] = { - { .compatible = "omapdss,lgphilips,lb035q02", }, - {}, -}; - -MODULE_DEVICE_TABLE(of, lb035q02_of_match); - -static struct spi_driver lb035q02_spi_driver = { - .probe = lb035q02_panel_spi_probe, - .remove = lb035q02_panel_spi_remove, - .driver = { - .name = "panel_lgphilips_lb035q02", - .of_match_table = lb035q02_of_match, - .suppress_bind_attrs = true, - }, -}; - -module_spi_driver(lb035q02_spi_driver); - -MODULE_ALIAS("spi:lgphilips,lb035q02"); -MODULE_AUTHOR("Tomi Valkeinen tomi.valkeinen@ti.com"); -MODULE_DESCRIPTION("LG.Philips LB035Q02 LCD Panel driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/gpu/drm/omapdrm/displays/panel-nec-nl8048hl11.c b/drivers/gpu/drm/omapdrm/displays/panel-nec-nl8048hl11.c deleted file mode 100644 index ebde3f6f670e..000000000000 --- a/drivers/gpu/drm/omapdrm/displays/panel-nec-nl8048hl11.c +++ /dev/null @@ -1,271 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * NEC NL8048HL11 Panel driver - * - * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ - * Author: Erik Gilling konkers@android.com - * Converted to new DSS device model: Tomi Valkeinen tomi.valkeinen@ti.com - */ - -#include <linux/delay.h> -#include <linux/gpio/consumer.h> -#include <linux/module.h> -#include <linux/spi/spi.h> - -#include "../dss/omapdss.h" - -struct panel_drv_data { - struct omap_dss_device dssdev; - - struct videomode vm; - - struct gpio_desc *res_gpio; - - struct spi_device *spi; -}; - -#define LCD_XRES 800 -#define LCD_YRES 480 -/* - * NEC PIX Clock Ratings - * MIN:21.8MHz TYP:23.8MHz MAX:25.7MHz - */ -#define LCD_PIXEL_CLOCK 23800000 - -static const struct { - unsigned char addr; - unsigned char dat; -} nec_8048_init_seq[] = { - { 3, 0x01 }, { 0, 0x00 }, { 1, 0x01 }, { 4, 0x00 }, { 5, 0x14 }, - { 6, 0x24 }, { 16, 0xD7 }, { 17, 0x00 }, { 18, 0x00 }, { 19, 0x55 }, - { 20, 0x01 }, { 21, 0x70 }, { 22, 0x1E }, { 23, 0x25 }, { 24, 0x25 }, - { 25, 0x02 }, { 26, 0x02 }, { 27, 0xA0 }, { 32, 0x2F }, { 33, 0x0F }, - { 34, 0x0F }, { 35, 0x0F }, { 36, 0x0F }, { 37, 0x0F }, { 38, 0x0F }, - { 39, 0x00 }, { 40, 0x02 }, { 41, 0x02 }, { 42, 0x02 }, { 43, 0x0F }, - { 44, 0x0F }, { 45, 0x0F }, { 46, 0x0F }, { 47, 0x0F }, { 48, 0x0F }, - { 49, 0x0F }, { 50, 0x00 }, { 51, 0x02 }, { 52, 0x02 }, { 53, 0x02 }, - { 80, 0x0C }, { 83, 0x42 }, { 84, 0x42 }, { 85, 0x41 }, { 86, 0x14 }, - { 89, 0x88 }, { 90, 0x01 }, { 91, 0x00 }, { 92, 0x02 }, { 93, 0x0C }, - { 94, 0x1C }, { 95, 0x27 }, { 98, 0x49 }, { 99, 0x27 }, { 102, 0x76 }, - { 103, 0x27 }, { 112, 0x01 }, { 113, 0x0E }, { 114, 0x02 }, - { 115, 0x0C }, { 118, 0x0C }, { 121, 0x30 }, { 130, 0x00 }, - { 131, 0x00 }, { 132, 0xFC }, { 134, 0x00 }, { 136, 0x00 }, - { 138, 0x00 }, { 139, 0x00 }, { 140, 0x00 }, { 141, 0xFC }, - { 143, 0x00 }, { 145, 0x00 }, { 147, 0x00 }, { 148, 0x00 }, - { 149, 0x00 }, { 150, 0xFC }, { 152, 0x00 }, { 154, 0x00 }, - { 156, 0x00 }, { 157, 0x00 }, { 2, 0x00 }, -}; - -static const struct videomode nec_8048_panel_vm = { - .hactive = LCD_XRES, - .vactive = LCD_YRES, - .pixelclock = LCD_PIXEL_CLOCK, - .hfront_porch = 6, - .hsync_len = 1, - .hback_porch = 4, - .vfront_porch = 3, - .vsync_len = 1, - .vback_porch = 4, - - .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW, -}; - -#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev) - -static int nec_8048_spi_send(struct spi_device *spi, unsigned char reg_addr, - unsigned char reg_data) -{ - int ret = 0; - unsigned int cmd = 0, data = 0; - - cmd = 0x0000 | reg_addr; /* register address write */ - data = 0x0100 | reg_data; /* register data write */ - data = (cmd << 16) | data; - - ret = spi_write(spi, (unsigned char *)&data, 4); - if (ret) - pr_err("error in spi_write %x\n", data); - - return ret; -} - -static int init_nec_8048_wvga_lcd(struct spi_device *spi) -{ - unsigned int i; - /* Initialization Sequence */ - /* nec_8048_spi_send(spi, REG, VAL) */ - for (i = 0; i < (ARRAY_SIZE(nec_8048_init_seq) - 1); i++) - nec_8048_spi_send(spi, nec_8048_init_seq[i].addr, - nec_8048_init_seq[i].dat); - udelay(20); - nec_8048_spi_send(spi, nec_8048_init_seq[i].addr, - nec_8048_init_seq[i].dat); - return 0; -} - -static int nec_8048_connect(struct omap_dss_device *src, - struct omap_dss_device *dst) -{ - return 0; -} - -static void nec_8048_disconnect(struct omap_dss_device *src, - struct omap_dss_device *dst) -{ -} - -static void nec_8048_enable(struct omap_dss_device *dssdev) -{ - struct panel_drv_data *ddata = to_panel_data(dssdev); - - gpiod_set_value_cansleep(ddata->res_gpio, 1); -} - -static void nec_8048_disable(struct omap_dss_device *dssdev) -{ - struct panel_drv_data *ddata = to_panel_data(dssdev); - - gpiod_set_value_cansleep(ddata->res_gpio, 0); -} - -static int nec_8048_get_modes(struct omap_dss_device *dssdev, - struct drm_connector *connector) -{ - struct panel_drv_data *ddata = to_panel_data(dssdev); - - return omapdss_display_get_modes(connector, &ddata->vm); -} - -static const struct omap_dss_device_ops nec_8048_ops = { - .connect = nec_8048_connect, - .disconnect = nec_8048_disconnect, - - .enable = nec_8048_enable, - .disable = nec_8048_disable, - - .get_modes = nec_8048_get_modes, -}; - -static int nec_8048_probe(struct spi_device *spi) -{ - struct panel_drv_data *ddata; - struct omap_dss_device *dssdev; - struct gpio_desc *gpio; - int r; - - dev_dbg(&spi->dev, "%s\n", __func__); - - spi->mode = SPI_MODE_0; - spi->bits_per_word = 32; - - r = spi_setup(spi); - if (r < 0) { - dev_err(&spi->dev, "spi_setup failed: %d\n", r); - return r; - } - - init_nec_8048_wvga_lcd(spi); - - ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL); - if (ddata == NULL) - return -ENOMEM; - - dev_set_drvdata(&spi->dev, ddata); - - ddata->spi = spi; - - gpio = devm_gpiod_get(&spi->dev, "reset", GPIOD_OUT_LOW); - if (IS_ERR(gpio)) { - dev_err(&spi->dev, "failed to get reset gpio\n"); - return PTR_ERR(gpio); - } - - ddata->res_gpio = gpio; - - ddata->vm = nec_8048_panel_vm; - - dssdev = &ddata->dssdev; - dssdev->dev = &spi->dev; - dssdev->ops = &nec_8048_ops; - dssdev->type = OMAP_DISPLAY_TYPE_DPI; - dssdev->display = true; - dssdev->owner = THIS_MODULE; - dssdev->of_port = 0; - dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES; - dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH - | DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE - | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE; - - omapdss_display_init(dssdev); - omapdss_device_register(dssdev); - - return 0; -} - -static int nec_8048_remove(struct spi_device *spi) -{ - struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev); - struct omap_dss_device *dssdev = &ddata->dssdev; - - dev_dbg(&ddata->spi->dev, "%s\n", __func__); - - omapdss_device_unregister(dssdev); - - nec_8048_disable(dssdev); - - return 0; -} - -#ifdef CONFIG_PM_SLEEP -static int nec_8048_suspend(struct device *dev) -{ - struct spi_device *spi = to_spi_device(dev); - - nec_8048_spi_send(spi, 2, 0x01); - mdelay(40); - - return 0; -} - -static int nec_8048_resume(struct device *dev) -{ - struct spi_device *spi = to_spi_device(dev); - - /* reinitialize the panel */ - spi_setup(spi); - nec_8048_spi_send(spi, 2, 0x00); - init_nec_8048_wvga_lcd(spi); - - return 0; -} -static SIMPLE_DEV_PM_OPS(nec_8048_pm_ops, nec_8048_suspend, - nec_8048_resume); -#define NEC_8048_PM_OPS (&nec_8048_pm_ops) -#else -#define NEC_8048_PM_OPS NULL -#endif - -static const struct of_device_id nec_8048_of_match[] = { - { .compatible = "omapdss,nec,nl8048hl11", }, - {}, -}; - -MODULE_DEVICE_TABLE(of, nec_8048_of_match); - -static struct spi_driver nec_8048_driver = { - .driver = { - .name = "panel-nec-nl8048hl11", - .pm = NEC_8048_PM_OPS, - .of_match_table = nec_8048_of_match, - .suppress_bind_attrs = true, - }, - .probe = nec_8048_probe, - .remove = nec_8048_remove, -}; - -module_spi_driver(nec_8048_driver); - -MODULE_ALIAS("spi:nec,nl8048hl11"); -MODULE_AUTHOR("Erik Gilling konkers@android.com"); -MODULE_DESCRIPTION("NEC-NL8048HL11 Driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/gpu/drm/omapdrm/displays/panel-sharp-ls037v7dw01.c b/drivers/gpu/drm/omapdrm/displays/panel-sharp-ls037v7dw01.c deleted file mode 100644 index 637eb64371d9..000000000000 --- a/drivers/gpu/drm/omapdrm/displays/panel-sharp-ls037v7dw01.c +++ /dev/null @@ -1,265 +0,0 @@ -/* - * LCD panel driver for Sharp LS037V7DW01 - * - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ - * Author: Tomi Valkeinen tomi.valkeinen@ti.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ - -#include <linux/delay.h> -#include <linux/gpio/consumer.h> -#include <linux/module.h> -#include <linux/of.h> -#include <linux/platform_device.h> -#include <linux/slab.h> -#include <linux/regulator/consumer.h> - -#include "../dss/omapdss.h" - -struct panel_drv_data { - struct omap_dss_device dssdev; - struct regulator *vcc; - - struct videomode vm; - - struct gpio_desc *resb_gpio; /* low = reset active min 20 us */ - struct gpio_desc *ini_gpio; /* high = power on */ - struct gpio_desc *mo_gpio; /* low = 480x640, high = 240x320 */ - struct gpio_desc *lr_gpio; /* high = conventional horizontal scanning */ - struct gpio_desc *ud_gpio; /* high = conventional vertical scanning */ -}; - -static const struct videomode sharp_ls_vm = { - .hactive = 480, - .vactive = 640, - - .pixelclock = 19200000, - - .hsync_len = 2, - .hfront_porch = 1, - .hback_porch = 28, - - .vsync_len = 1, - .vfront_porch = 1, - .vback_porch = 1, - - .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW, -}; - -#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev) - -static int sharp_ls_connect(struct omap_dss_device *src, - struct omap_dss_device *dst) -{ - return 0; -} - -static void sharp_ls_disconnect(struct omap_dss_device *src, - struct omap_dss_device *dst) -{ -} - -static void sharp_ls_pre_enable(struct omap_dss_device *dssdev) -{ - struct panel_drv_data *ddata = to_panel_data(dssdev); - int r; - - if (ddata->vcc) { - r = regulator_enable(ddata->vcc); - if (r) - dev_err(dssdev->dev, "%s: failed to enable regulator\n", - __func__); - } -} - -static void sharp_ls_enable(struct omap_dss_device *dssdev) -{ - struct panel_drv_data *ddata = to_panel_data(dssdev); - - /* wait couple of vsyncs until enabling the LCD */ - msleep(50); - - if (ddata->resb_gpio) - gpiod_set_value_cansleep(ddata->resb_gpio, 1); - - if (ddata->ini_gpio) - gpiod_set_value_cansleep(ddata->ini_gpio, 1); -} - -static void sharp_ls_disable(struct omap_dss_device *dssdev) -{ - struct panel_drv_data *ddata = to_panel_data(dssdev); - - if (ddata->ini_gpio) - gpiod_set_value_cansleep(ddata->ini_gpio, 0); - - if (ddata->resb_gpio) - gpiod_set_value_cansleep(ddata->resb_gpio, 0); - - /* wait at least 5 vsyncs after disabling the LCD */ - msleep(100); -} - -static void sharp_ls_post_disable(struct omap_dss_device *dssdev) -{ - struct panel_drv_data *ddata = to_panel_data(dssdev); - - if (ddata->vcc) - regulator_disable(ddata->vcc); -} - -static int sharp_ls_get_modes(struct omap_dss_device *dssdev, - struct drm_connector *connector) -{ - struct panel_drv_data *ddata = to_panel_data(dssdev); - - return omapdss_display_get_modes(connector, &ddata->vm); -} - -static const struct omap_dss_device_ops sharp_ls_ops = { - .connect = sharp_ls_connect, - .disconnect = sharp_ls_disconnect, - - .pre_enable = sharp_ls_pre_enable, - .enable = sharp_ls_enable, - .disable = sharp_ls_disable, - .post_disable = sharp_ls_post_disable, - - .get_modes = sharp_ls_get_modes, -}; - -static int sharp_ls_get_gpio_of(struct device *dev, int index, int val, - const char *desc, struct gpio_desc **gpiod) -{ - struct gpio_desc *gd; - - *gpiod = NULL; - - gd = devm_gpiod_get_index(dev, desc, index, GPIOD_OUT_LOW); - if (IS_ERR(gd)) - return PTR_ERR(gd); - - *gpiod = gd; - return 0; -} - -static int sharp_ls_probe_of(struct platform_device *pdev) -{ - struct panel_drv_data *ddata = platform_get_drvdata(pdev); - int r; - - ddata->vcc = devm_regulator_get(&pdev->dev, "envdd"); - if (IS_ERR(ddata->vcc)) { - dev_err(&pdev->dev, "failed to get regulator\n"); - return PTR_ERR(ddata->vcc); - } - - /* lcd INI */ - r = sharp_ls_get_gpio_of(&pdev->dev, 0, 0, "enable", &ddata->ini_gpio); - if (r) - return r; - - /* lcd RESB */ - r = sharp_ls_get_gpio_of(&pdev->dev, 0, 0, "reset", &ddata->resb_gpio); - if (r) - return r; - - /* lcd MO */ - r = sharp_ls_get_gpio_of(&pdev->dev, 0, 0, "mode", &ddata->mo_gpio); - if (r) - return r; - - /* lcd LR */ - r = sharp_ls_get_gpio_of(&pdev->dev, 1, 1, "mode", &ddata->lr_gpio); - if (r) - return r; - - /* lcd UD */ - r = sharp_ls_get_gpio_of(&pdev->dev, 2, 1, "mode", &ddata->ud_gpio); - if (r) - return r; - - return 0; -} - -static int sharp_ls_probe(struct platform_device *pdev) -{ - struct panel_drv_data *ddata; - struct omap_dss_device *dssdev; - int r; - - ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL); - if (ddata == NULL) - return -ENOMEM; - - platform_set_drvdata(pdev, ddata); - - r = sharp_ls_probe_of(pdev); - if (r) - return r; - - ddata->vm = sharp_ls_vm; - - dssdev = &ddata->dssdev; - dssdev->dev = &pdev->dev; - dssdev->ops = &sharp_ls_ops; - dssdev->type = OMAP_DISPLAY_TYPE_DPI; - dssdev->display = true; - dssdev->owner = THIS_MODULE; - dssdev->of_port = 0; - dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES; - - /* - * Note: According to the panel documentation: - * DATA needs to be driven on the FALLING edge - */ - dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH - | DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE - | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE; - - omapdss_display_init(dssdev); - omapdss_device_register(dssdev); - - return 0; -} - -static int __exit sharp_ls_remove(struct platform_device *pdev) -{ - struct panel_drv_data *ddata = platform_get_drvdata(pdev); - struct omap_dss_device *dssdev = &ddata->dssdev; - - omapdss_device_unregister(dssdev); - - if (omapdss_device_is_enabled(dssdev)) { - sharp_ls_disable(dssdev); - sharp_ls_post_disable(dssdev); - } - - return 0; -} - -static const struct of_device_id sharp_ls_of_match[] = { - { .compatible = "omapdss,sharp,ls037v7dw01", }, - {}, -}; - -MODULE_DEVICE_TABLE(of, sharp_ls_of_match); - -static struct platform_driver sharp_ls_driver = { - .probe = sharp_ls_probe, - .remove = __exit_p(sharp_ls_remove), - .driver = { - .name = "panel-sharp-ls037v7dw01", - .of_match_table = sharp_ls_of_match, - .suppress_bind_attrs = true, - }, -}; - -module_platform_driver(sharp_ls_driver); - -MODULE_AUTHOR("Tomi Valkeinen tomi.valkeinen@ti.com"); -MODULE_DESCRIPTION("Sharp LS037V7DW01 Panel Driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/gpu/drm/omapdrm/displays/panel-sony-acx565akm.c b/drivers/gpu/drm/omapdrm/displays/panel-sony-acx565akm.c deleted file mode 100644 index 67379f71bd88..000000000000 --- a/drivers/gpu/drm/omapdrm/displays/panel-sony-acx565akm.c +++ /dev/null @@ -1,766 +0,0 @@ -/* - * Sony ACX565AKM LCD Panel driver - * - * Copyright (C) 2010 Nokia Corporation - * - * Original Driver Author: Imre Deak imre.deak@nokia.com - * Based on panel-generic.c by Tomi Valkeinen tomi.valkeinen@ti.com - * Adapted to new DSS2 framework: Roger Quadros roger.quadros@nokia.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see http://www.gnu.org/licenses/. - */ - -#include <linux/backlight.h> -#include <linux/delay.h> -#include <linux/gpio/consumer.h> -#include <linux/jiffies.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/sched.h> -#include <linux/spi/spi.h> - -#include "../dss/omapdss.h" - -#define MIPID_CMD_READ_DISP_ID 0x04 -#define MIPID_CMD_READ_RED 0x06 -#define MIPID_CMD_READ_GREEN 0x07 -#define MIPID_CMD_READ_BLUE 0x08 -#define MIPID_CMD_READ_DISP_STATUS 0x09 -#define MIPID_CMD_RDDSDR 0x0F -#define MIPID_CMD_SLEEP_IN 0x10 -#define MIPID_CMD_SLEEP_OUT 0x11 -#define MIPID_CMD_DISP_OFF 0x28 -#define MIPID_CMD_DISP_ON 0x29 -#define MIPID_CMD_WRITE_DISP_BRIGHTNESS 0x51 -#define MIPID_CMD_READ_DISP_BRIGHTNESS 0x52 -#define MIPID_CMD_WRITE_CTRL_DISP 0x53 - -#define CTRL_DISP_BRIGHTNESS_CTRL_ON (1 << 5) -#define CTRL_DISP_AMBIENT_LIGHT_CTRL_ON (1 << 4) -#define CTRL_DISP_BACKLIGHT_ON (1 << 2) -#define CTRL_DISP_AUTO_BRIGHTNESS_ON (1 << 1) - -#define MIPID_CMD_READ_CTRL_DISP 0x54 -#define MIPID_CMD_WRITE_CABC 0x55 -#define MIPID_CMD_READ_CABC 0x56 - -#define MIPID_VER_LPH8923 3 -#define MIPID_VER_LS041Y3 4 -#define MIPID_VER_L4F00311 8 -#define MIPID_VER_ACX565AKM 9 - -struct panel_drv_data { - struct omap_dss_device dssdev; - - struct gpio_desc *reset_gpio; - - struct videomode vm; - - char *name; - int enabled; - int model; - int revision; - u8 display_id[3]; - unsigned has_bc:1; - unsigned has_cabc:1; - unsigned cabc_mode; - unsigned long hw_guard_end; /* next value of jiffies - when we can issue the - next sleep in/out command */ - unsigned long hw_guard_wait; /* max guard time in jiffies */ - - struct spi_device *spi; - struct mutex mutex; - - struct backlight_device *bl_dev; -}; - -static const struct videomode acx565akm_panel_vm = { - .hactive = 800, - .vactive = 480, - .pixelclock = 24000000, - .hfront_porch = 28, - .hsync_len = 4, - .hback_porch = 24, - .vfront_porch = 3, - .vsync_len = 3, - .vback_porch = 4, - - .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW, -}; - -#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev) - -static void acx565akm_transfer(struct panel_drv_data *ddata, int cmd, - const u8 *wbuf, int wlen, u8 *rbuf, int rlen) -{ - struct spi_message m; - struct spi_transfer *x, xfer[5]; - int r; - - BUG_ON(ddata->spi == NULL); - - spi_message_init(&m); - - memset(xfer, 0, sizeof(xfer)); - x = &xfer[0]; - - cmd &= 0xff; - x->tx_buf = &cmd; - x->bits_per_word = 9; - x->len = 2; - - if (rlen > 1 && wlen == 0) { - /* - * Between the command and the response data there is a - * dummy clock cycle. Add an extra bit after the command - * word to account for this. - */ - x->bits_per_word = 10; - cmd <<= 1; - } - spi_message_add_tail(x, &m); - - if (wlen) { - x++; - x->tx_buf = wbuf; - x->len = wlen; - x->bits_per_word = 9; - spi_message_add_tail(x, &m); - } - - if (rlen) { - x++; - x->rx_buf = rbuf; - x->len = rlen; - spi_message_add_tail(x, &m); - } - - r = spi_sync(ddata->spi, &m); - if (r < 0) - dev_dbg(&ddata->spi->dev, "spi_sync %d\n", r); -} - -static inline void acx565akm_cmd(struct panel_drv_data *ddata, int cmd) -{ - acx565akm_transfer(ddata, cmd, NULL, 0, NULL, 0); -} - -static inline void acx565akm_write(struct panel_drv_data *ddata, - int reg, const u8 *buf, int len) -{ - acx565akm_transfer(ddata, reg, buf, len, NULL, 0); -} - -static inline void acx565akm_read(struct panel_drv_data *ddata, - int reg, u8 *buf, int len) -{ - acx565akm_transfer(ddata, reg, NULL, 0, buf, len); -} - -static void hw_guard_start(struct panel_drv_data *ddata, int guard_msec) -{ - ddata->hw_guard_wait = msecs_to_jiffies(guard_msec); - ddata->hw_guard_end = jiffies + ddata->hw_guard_wait; -} - -static void hw_guard_wait(struct panel_drv_data *ddata) -{ - unsigned long wait = ddata->hw_guard_end - jiffies; - - if ((long)wait > 0 && wait <= ddata->hw_guard_wait) { - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(wait); - } -} - -static void set_sleep_mode(struct panel_drv_data *ddata, int on) -{ - int cmd; - - if (on) - cmd = MIPID_CMD_SLEEP_IN; - else - cmd = MIPID_CMD_SLEEP_OUT; - /* - * We have to keep 120msec between sleep in/out commands. - * (8.2.15, 8.2.16). - */ - hw_guard_wait(ddata); - acx565akm_cmd(ddata, cmd); - hw_guard_start(ddata, 120); -} - -static void set_display_state(struct panel_drv_data *ddata, int enabled) -{ - int cmd = enabled ? MIPID_CMD_DISP_ON : MIPID_CMD_DISP_OFF; - - acx565akm_cmd(ddata, cmd); -} - -static int panel_enabled(struct panel_drv_data *ddata) -{ - __be32 v; - u32 disp_status; - int enabled; - - acx565akm_read(ddata, MIPID_CMD_READ_DISP_STATUS, (u8 *)&v, 4); - disp_status = __be32_to_cpu(v); - enabled = (disp_status & (1 << 17)) && (disp_status & (1 << 10)); - dev_dbg(&ddata->spi->dev, - "LCD panel %senabled by bootloader (status 0x%04x)\n", - enabled ? "" : "not ", disp_status); - return enabled; -} - -static int panel_detect(struct panel_drv_data *ddata) -{ - acx565akm_read(ddata, MIPID_CMD_READ_DISP_ID, ddata->display_id, 3); - dev_dbg(&ddata->spi->dev, "MIPI display ID: %02x%02x%02x\n", - ddata->display_id[0], - ddata->display_id[1], - ddata->display_id[2]); - - switch (ddata->display_id[0]) { - case 0x10: - ddata->model = MIPID_VER_ACX565AKM; - ddata->name = "acx565akm"; - ddata->has_bc = 1; - ddata->has_cabc = 1; - break; - case 0x29: - ddata->model = MIPID_VER_L4F00311; - ddata->name = "l4f00311"; - break; - case 0x45: - ddata->model = MIPID_VER_LPH8923; - ddata->name = "lph8923"; - break; - case 0x83: - ddata->model = MIPID_VER_LS041Y3; - ddata->name = "ls041y3"; - break; - default: - ddata->name = "unknown"; - dev_err(&ddata->spi->dev, "invalid display ID\n"); - return -ENODEV; - } - - ddata->revision = ddata->display_id[1]; - - dev_info(&ddata->spi->dev, "omapfb: %s rev %02x LCD detected\n", - ddata->name, ddata->revision); - - return 0; -} - -/*----------------------Backlight Control-------------------------*/ - -static void enable_backlight_ctrl(struct panel_drv_data *ddata, int enable) -{ - u16 ctrl; - - acx565akm_read(ddata, MIPID_CMD_READ_CTRL_DISP, (u8 *)&ctrl, 1); - if (enable) { - ctrl |= CTRL_DISP_BRIGHTNESS_CTRL_ON | - CTRL_DISP_BACKLIGHT_ON; - } else { - ctrl &= ~(CTRL_DISP_BRIGHTNESS_CTRL_ON | - CTRL_DISP_BACKLIGHT_ON); - } - - ctrl |= 1 << 8; - acx565akm_write(ddata, MIPID_CMD_WRITE_CTRL_DISP, (u8 *)&ctrl, 2); -} - -static void set_cabc_mode(struct panel_drv_data *ddata, unsigned int mode) -{ - u16 cabc_ctrl; - - ddata->cabc_mode = mode; - if (!ddata->enabled) - return; - cabc_ctrl = 0; - acx565akm_read(ddata, MIPID_CMD_READ_CABC, (u8 *)&cabc_ctrl, 1); - cabc_ctrl &= ~3; - cabc_ctrl |= (1 << 8) | (mode & 3); - acx565akm_write(ddata, MIPID_CMD_WRITE_CABC, (u8 *)&cabc_ctrl, 2); -} - -static unsigned int get_cabc_mode(struct panel_drv_data *ddata) -{ - return ddata->cabc_mode; -} - -static unsigned int get_hw_cabc_mode(struct panel_drv_data *ddata) -{ - u8 cabc_ctrl; - - acx565akm_read(ddata, MIPID_CMD_READ_CABC, &cabc_ctrl, 1); - return cabc_ctrl & 3; -} - -static void acx565akm_set_brightness(struct panel_drv_data *ddata, int level) -{ - int bv; - - bv = level | (1 << 8); - acx565akm_write(ddata, MIPID_CMD_WRITE_DISP_BRIGHTNESS, (u8 *)&bv, 2); - - if (level) - enable_backlight_ctrl(ddata, 1); - else - enable_backlight_ctrl(ddata, 0); -} - -static int acx565akm_get_actual_brightness(struct panel_drv_data *ddata) -{ - u8 bv; - - acx565akm_read(ddata, MIPID_CMD_READ_DISP_BRIGHTNESS, &bv, 1); - - return bv; -} - - -static int acx565akm_bl_update_status(struct backlight_device *dev) -{ - struct panel_drv_data *ddata = dev_get_drvdata(&dev->dev); - int level; - - dev_dbg(&ddata->spi->dev, "%s\n", __func__); - - if (dev->props.fb_blank == FB_BLANK_UNBLANK && - dev->props.power == FB_BLANK_UNBLANK) - level = dev->props.brightness; - else - level = 0; - - if (ddata->has_bc) - acx565akm_set_brightness(ddata, level); - else - return -ENODEV; - - return 0; -} - -static int acx565akm_bl_get_intensity(struct backlight_device *dev) -{ - struct panel_drv_data *ddata = dev_get_drvdata(&dev->dev); - - dev_dbg(&dev->dev, "%s\n", __func__); - - if (!ddata->has_bc) - return -ENODEV; - - if (dev->props.fb_blank == FB_BLANK_UNBLANK && - dev->props.power == FB_BLANK_UNBLANK) { - if (ddata->has_bc) - return acx565akm_get_actual_brightness(ddata); - else - return dev->props.brightness; - } - - return 0; -} - -static int acx565akm_bl_update_status_locked(struct backlight_device *dev) -{ - struct panel_drv_data *ddata = dev_get_drvdata(&dev->dev); - int r; - - mutex_lock(&ddata->mutex); - r = acx565akm_bl_update_status(dev); - mutex_unlock(&ddata->mutex); - - return r; -} - -static int acx565akm_bl_get_intensity_locked(struct backlight_device *dev) -{ - struct panel_drv_data *ddata = dev_get_drvdata(&dev->dev); - int r; - - mutex_lock(&ddata->mutex); - r = acx565akm_bl_get_intensity(dev); - mutex_unlock(&ddata->mutex); - - return r; -} - -static const struct backlight_ops acx565akm_bl_ops = { - .get_brightness = acx565akm_bl_get_intensity_locked, - .update_status = acx565akm_bl_update_status_locked, -}; - -/*--------------------Auto Brightness control via Sysfs---------------------*/ - -static const char * const cabc_modes[] = { - "off", /* always used when CABC is not supported */ - "ui", - "still-image", - "moving-image", -}; - -static ssize_t show_cabc_mode(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct panel_drv_data *ddata = dev_get_drvdata(dev); - const char *mode_str; - int mode; - int len; - - if (!ddata->has_cabc) - mode = 0; - else - mode = get_cabc_mode(ddata); - mode_str = "unknown"; - if (mode >= 0 && mode < ARRAY_SIZE(cabc_modes)) - mode_str = cabc_modes[mode]; - len = snprintf(buf, PAGE_SIZE, "%s\n", mode_str); - - return len < PAGE_SIZE - 1 ? len : PAGE_SIZE - 1; -} - -static ssize_t store_cabc_mode(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct panel_drv_data *ddata = dev_get_drvdata(dev); - int i; - - for (i = 0; i < ARRAY_SIZE(cabc_modes); i++) { - const char *mode_str = cabc_modes[i]; - int cmp_len = strlen(mode_str); - - if (count > 0 && buf[count - 1] == '\n') - count--; - if (count != cmp_len) - continue; - - if (strncmp(buf, mode_str, cmp_len) == 0) - break; - } - - if (i == ARRAY_SIZE(cabc_modes)) - return -EINVAL; - - if (!ddata->has_cabc && i != 0) - return -EINVAL; - - mutex_lock(&ddata->mutex); - set_cabc_mode(ddata, i); - mutex_unlock(&ddata->mutex); - - return count; -} - -static ssize_t show_cabc_available_modes(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct panel_drv_data *ddata = dev_get_drvdata(dev); - int len; - int i; - - if (!ddata->has_cabc) - return snprintf(buf, PAGE_SIZE, "%s\n", cabc_modes[0]); - - for (i = 0, len = 0; - len < PAGE_SIZE && i < ARRAY_SIZE(cabc_modes); i++) - len += snprintf(&buf[len], PAGE_SIZE - len, "%s%s%s", - i ? " " : "", cabc_modes[i], - i == ARRAY_SIZE(cabc_modes) - 1 ? "\n" : ""); - - return len < PAGE_SIZE ? len : PAGE_SIZE - 1; -} - -static DEVICE_ATTR(cabc_mode, S_IRUGO | S_IWUSR, - show_cabc_mode, store_cabc_mode); -static DEVICE_ATTR(cabc_available_modes, S_IRUGO, - show_cabc_available_modes, NULL); - -static struct attribute *bldev_attrs[] = { - &dev_attr_cabc_mode.attr, - &dev_attr_cabc_available_modes.attr, - NULL, -}; - -static const struct attribute_group bldev_attr_group = { - .attrs = bldev_attrs, -}; - -static int acx565akm_connect(struct omap_dss_device *src, - struct omap_dss_device *dst) -{ - return 0; -} - -static void acx565akm_disconnect(struct omap_dss_device *src, - struct omap_dss_device *dst) -{ -} - -static int acx565akm_panel_power_on(struct omap_dss_device *dssdev) -{ - struct panel_drv_data *ddata = to_panel_data(dssdev); - - dev_dbg(&ddata->spi->dev, "%s\n", __func__); - - /*FIXME tweak me */ - msleep(50); - - if (ddata->reset_gpio) - gpiod_set_value(ddata->reset_gpio, 1); - - if (ddata->enabled) { - dev_dbg(&ddata->spi->dev, "panel already enabled\n"); - return 0; - } - - /* - * We have to meet all the following delay requirements: - * 1. tRW: reset pulse width 10usec (7.12.1) - * 2. tRT: reset cancel time 5msec (7.12.1) - * 3. Providing PCLK,HS,VS signals for 2 frames = ~50msec worst - * case (7.6.2) - * 4. 120msec before the sleep out command (7.12.1) - */ - msleep(120); - - set_sleep_mode(ddata, 0); - ddata->enabled = 1; - - /* 5msec between sleep out and the next command. (8.2.16) */ - usleep_range(5000, 10000); - set_display_state(ddata, 1); - set_cabc_mode(ddata, ddata->cabc_mode); - - return acx565akm_bl_update_status(ddata->bl_dev); -} - -static void acx565akm_panel_power_off(struct omap_dss_device *dssdev) -{ - struct panel_drv_data *ddata = to_panel_data(dssdev); - - dev_dbg(dssdev->dev, "%s\n", __func__); - - if (!ddata->enabled) - return; - - set_display_state(ddata, 0); - set_sleep_mode(ddata, 1); - ddata->enabled = 0; - /* - * We have to provide PCLK,HS,VS signals for 2 frames (worst case - * ~50msec) after sending the sleep in command and asserting the - * reset signal. We probably could assert the reset w/o the delay - * but we still delay to avoid possible artifacts. (7.6.1) - */ - msleep(50); - - if (ddata->reset_gpio) - gpiod_set_value(ddata->reset_gpio, 0); - - /* FIXME need to tweak this delay */ - msleep(100); -} - -static void acx565akm_enable(struct omap_dss_device *dssdev) -{ - struct panel_drv_data *ddata = to_panel_data(dssdev); - - mutex_lock(&ddata->mutex); - acx565akm_panel_power_on(dssdev); - mutex_unlock(&ddata->mutex); -} - -static void acx565akm_disable(struct omap_dss_device *dssdev) -{ - struct panel_drv_data *ddata = to_panel_data(dssdev); - - mutex_lock(&ddata->mutex); - acx565akm_panel_power_off(dssdev); - mutex_unlock(&ddata->mutex); -} - -static int acx565akm_get_modes(struct omap_dss_device *dssdev, - struct drm_connector *connector) -{ - struct panel_drv_data *ddata = to_panel_data(dssdev); - - return omapdss_display_get_modes(connector, &ddata->vm); -} - -static const struct omap_dss_device_ops acx565akm_ops = { - .connect = acx565akm_connect, - .disconnect = acx565akm_disconnect, - - .enable = acx565akm_enable, - .disable = acx565akm_disable, - - .get_modes = acx565akm_get_modes, -}; - -static int acx565akm_probe(struct spi_device *spi) -{ - struct panel_drv_data *ddata; - struct omap_dss_device *dssdev; - struct backlight_device *bldev; - int max_brightness, brightness; - struct backlight_properties props; - struct gpio_desc *gpio; - int r; - - dev_dbg(&spi->dev, "%s\n", __func__); - - spi->mode = SPI_MODE_3; - - ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL); - if (ddata == NULL) - return -ENOMEM; - - dev_set_drvdata(&spi->dev, ddata); - - ddata->spi = spi; - - mutex_init(&ddata->mutex); - - gpio = devm_gpiod_get_optional(&spi->dev, "reset", GPIOD_OUT_LOW); - if (IS_ERR(gpio)) { - dev_err(&spi->dev, "failed to parse reset gpio\n"); - return PTR_ERR(gpio); - } - - ddata->reset_gpio = gpio; - - if (ddata->reset_gpio) - gpiod_set_value(ddata->reset_gpio, 1); - - /* - * After reset we have to wait 5 msec before the first - * command can be sent. - */ - usleep_range(5000, 10000); - - ddata->enabled = panel_enabled(ddata); - - r = panel_detect(ddata); - - if (!ddata->enabled && ddata->reset_gpio) - gpiod_set_value(ddata->reset_gpio, 0); - - if (r) { - dev_err(&spi->dev, "%s panel detect error\n", __func__); - return r; - } - - memset(&props, 0, sizeof(props)); - props.fb_blank = FB_BLANK_UNBLANK; - props.power = FB_BLANK_UNBLANK; - props.type = BACKLIGHT_RAW; - - bldev = backlight_device_register("acx565akm", &ddata->spi->dev, - ddata, &acx565akm_bl_ops, &props); - if (IS_ERR(bldev)) - return PTR_ERR(bldev); - ddata->bl_dev = bldev; - if (ddata->has_cabc) { - r = sysfs_create_group(&bldev->dev.kobj, &bldev_attr_group); - if (r) { - dev_err(&bldev->dev, - "%s failed to create sysfs files\n", __func__); - goto err_backlight_unregister; - } - ddata->cabc_mode = get_hw_cabc_mode(ddata); - } - - max_brightness = 255; - - if (ddata->has_bc) - brightness = acx565akm_get_actual_brightness(ddata); - else - brightness = 0; - - bldev->props.max_brightness = max_brightness; - bldev->props.brightness = brightness; - - acx565akm_bl_update_status(bldev); - - - ddata->vm = acx565akm_panel_vm; - - dssdev = &ddata->dssdev; - dssdev->dev = &spi->dev; - dssdev->ops = &acx565akm_ops; - dssdev->type = OMAP_DISPLAY_TYPE_SDI; - dssdev->display = true; - dssdev->owner = THIS_MODULE; - dssdev->of_port = 0; - dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES; - dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH - | DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE - | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE; - - omapdss_display_init(dssdev); - omapdss_device_register(dssdev); - - return 0; - -err_backlight_unregister: - backlight_device_unregister(bldev); - return r; -} - -static int acx565akm_remove(struct spi_device *spi) -{ - struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev); - struct omap_dss_device *dssdev = &ddata->dssdev; - - dev_dbg(&ddata->spi->dev, "%s\n", __func__); - - sysfs_remove_group(&ddata->bl_dev->dev.kobj, &bldev_attr_group); - backlight_device_unregister(ddata->bl_dev); - - omapdss_device_unregister(dssdev); - - if (omapdss_device_is_enabled(dssdev)) - acx565akm_disable(dssdev); - - return 0; -} - -static const struct of_device_id acx565akm_of_match[] = { - { .compatible = "omapdss,sony,acx565akm", }, - {}, -}; -MODULE_DEVICE_TABLE(of, acx565akm_of_match); - -static struct spi_driver acx565akm_driver = { - .driver = { - .name = "acx565akm", - .of_match_table = acx565akm_of_match, - .suppress_bind_attrs = true, - }, - .probe = acx565akm_probe, - .remove = acx565akm_remove, -}; - -module_spi_driver(acx565akm_driver); - -MODULE_ALIAS("spi:sony,acx565akm"); -MODULE_AUTHOR("Nokia Corporation"); -MODULE_DESCRIPTION("acx565akm LCD Driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c b/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c deleted file mode 100644 index 8993daa73e78..000000000000 --- a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c +++ /dev/null @@ -1,401 +0,0 @@ -/* - * Toppoly TD028TTEC1 panel support - * - * Copyright (C) 2008 Nokia Corporation - * Author: Tomi Valkeinen tomi.valkeinen@ti.com - * - * Neo 1973 code (jbt6k74.c): - * Copyright (C) 2006-2007 by OpenMoko, Inc. - * Author: Harald Welte laforge@openmoko.org - * - * Ported and adapted from Neo 1973 U-Boot by: - * H. Nikolaus Schaller hns@goldelico.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see http://www.gnu.org/licenses/. - */ - -#include <linux/module.h> -#include <linux/delay.h> -#include <linux/spi/spi.h> - -#include "../dss/omapdss.h" - -struct panel_drv_data { - struct omap_dss_device dssdev; - - struct videomode vm; - - struct backlight_device *backlight; - - struct spi_device *spi_dev; -}; - -static const struct videomode td028ttec1_panel_vm = { - .hactive = 480, - .vactive = 640, - .pixelclock = 22153000, - .hfront_porch = 24, - .hsync_len = 8, - .hback_porch = 8, - .vfront_porch = 4, - .vsync_len = 2, - .vback_porch = 2, - - .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW, -}; - -#define JBT_COMMAND 0x000 -#define JBT_DATA 0x100 - -static int jbt_ret_write_0(struct panel_drv_data *ddata, u8 reg) -{ - int rc; - u16 tx_buf = JBT_COMMAND | reg; - - rc = spi_write(ddata->spi_dev, (u8 *)&tx_buf, - 1*sizeof(u16)); - if (rc != 0) - dev_err(&ddata->spi_dev->dev, - "jbt_ret_write_0 spi_write ret %d\n", rc); - - return rc; -} - -static int jbt_reg_write_1(struct panel_drv_data *ddata, u8 reg, u8 data) -{ - int rc; - u16 tx_buf[2]; - - tx_buf[0] = JBT_COMMAND | reg; - tx_buf[1] = JBT_DATA | data; - rc = spi_write(ddata->spi_dev, (u8 *)tx_buf, - 2*sizeof(u16)); - if (rc != 0) - dev_err(&ddata->spi_dev->dev, - "jbt_reg_write_1 spi_write ret %d\n", rc); - - return rc; -} - -static int jbt_reg_write_2(struct panel_drv_data *ddata, u8 reg, u16 data) -{ - int rc; - u16 tx_buf[3]; - - tx_buf[0] = JBT_COMMAND | reg; - tx_buf[1] = JBT_DATA | (data >> 8); - tx_buf[2] = JBT_DATA | (data & 0xff); - - rc = spi_write(ddata->spi_dev, (u8 *)tx_buf, - 3*sizeof(u16)); - - if (rc != 0) - dev_err(&ddata->spi_dev->dev, - "jbt_reg_write_2 spi_write ret %d\n", rc); - - return rc; -} - -enum jbt_register { - JBT_REG_SLEEP_IN = 0x10, - JBT_REG_SLEEP_OUT = 0x11, - - JBT_REG_DISPLAY_OFF = 0x28, - JBT_REG_DISPLAY_ON = 0x29, - - JBT_REG_RGB_FORMAT = 0x3a, - JBT_REG_QUAD_RATE = 0x3b, - - JBT_REG_POWER_ON_OFF = 0xb0, - JBT_REG_BOOSTER_OP = 0xb1, - JBT_REG_BOOSTER_MODE = 0xb2, - JBT_REG_BOOSTER_FREQ = 0xb3, - JBT_REG_OPAMP_SYSCLK = 0xb4, - JBT_REG_VSC_VOLTAGE = 0xb5, - JBT_REG_VCOM_VOLTAGE = 0xb6, - JBT_REG_EXT_DISPL = 0xb7, - JBT_REG_OUTPUT_CONTROL = 0xb8, - JBT_REG_DCCLK_DCEV = 0xb9, - JBT_REG_DISPLAY_MODE1 = 0xba, - JBT_REG_DISPLAY_MODE2 = 0xbb, - JBT_REG_DISPLAY_MODE = 0xbc, - JBT_REG_ASW_SLEW = 0xbd, - JBT_REG_DUMMY_DISPLAY = 0xbe, - JBT_REG_DRIVE_SYSTEM = 0xbf, - - JBT_REG_SLEEP_OUT_FR_A = 0xc0, - JBT_REG_SLEEP_OUT_FR_B = 0xc1, - JBT_REG_SLEEP_OUT_FR_C = 0xc2, - JBT_REG_SLEEP_IN_LCCNT_D = 0xc3, - JBT_REG_SLEEP_IN_LCCNT_E = 0xc4, - JBT_REG_SLEEP_IN_LCCNT_F = 0xc5, - JBT_REG_SLEEP_IN_LCCNT_G = 0xc6, - - JBT_REG_GAMMA1_FINE_1 = 0xc7, - JBT_REG_GAMMA1_FINE_2 = 0xc8, - JBT_REG_GAMMA1_INCLINATION = 0xc9, - JBT_REG_GAMMA1_BLUE_OFFSET = 0xca, - - JBT_REG_BLANK_CONTROL = 0xcf, - JBT_REG_BLANK_TH_TV = 0xd0, - JBT_REG_CKV_ON_OFF = 0xd1, - JBT_REG_CKV_1_2 = 0xd2, - JBT_REG_OEV_TIMING = 0xd3, - JBT_REG_ASW_TIMING_1 = 0xd4, - JBT_REG_ASW_TIMING_2 = 0xd5, - - JBT_REG_HCLOCK_VGA = 0xec, - JBT_REG_HCLOCK_QVGA = 0xed, -}; - -#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev) - -static int td028ttec1_panel_connect(struct omap_dss_device *src, - struct omap_dss_device *dst) -{ - return 0; -} - -static void td028ttec1_panel_disconnect(struct omap_dss_device *src, - struct omap_dss_device *dst) -{ -} - -static void td028ttec1_panel_enable(struct omap_dss_device *dssdev) -{ - struct panel_drv_data *ddata = to_panel_data(dssdev); - int r = 0; - - dev_dbg(dssdev->dev, "%s: state %d\n", __func__, dssdev->state); - - /* three times command zero */ - r |= jbt_ret_write_0(ddata, 0x00); - usleep_range(1000, 2000); - r |= jbt_ret_write_0(ddata, 0x00); - usleep_range(1000, 2000); - r |= jbt_ret_write_0(ddata, 0x00); - usleep_range(1000, 2000); - - if (r) { - dev_warn(dssdev->dev, "%s: transfer error\n", __func__); - return; - } - - /* deep standby out */ - r |= jbt_reg_write_1(ddata, JBT_REG_POWER_ON_OFF, 0x17); - - /* RGB I/F on, RAM write off, QVGA through, SIGCON enable */ - r |= jbt_reg_write_1(ddata, JBT_REG_DISPLAY_MODE, 0x80); - - /* Quad mode off */ - r |= jbt_reg_write_1(ddata, JBT_REG_QUAD_RATE, 0x00); - - /* AVDD on, XVDD on */ - r |= jbt_reg_write_1(ddata, JBT_REG_POWER_ON_OFF, 0x16); - - /* Output control */ - r |= jbt_reg_write_2(ddata, JBT_REG_OUTPUT_CONTROL, 0xfff9); - - /* Sleep mode off */ - r |= jbt_ret_write_0(ddata, JBT_REG_SLEEP_OUT); - - /* at this point we have like 50% grey */ - - /* initialize register set */ - r |= jbt_reg_write_1(ddata, JBT_REG_DISPLAY_MODE1, 0x01); - r |= jbt_reg_write_1(ddata, JBT_REG_DISPLAY_MODE2, 0x00); - r |= jbt_reg_write_1(ddata, JBT_REG_RGB_FORMAT, 0x60); - r |= jbt_reg_write_1(ddata, JBT_REG_DRIVE_SYSTEM, 0x10); - r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_OP, 0x56); - r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_MODE, 0x33); - r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_FREQ, 0x11); - r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_FREQ, 0x11); - r |= jbt_reg_write_1(ddata, JBT_REG_OPAMP_SYSCLK, 0x02); - r |= jbt_reg_write_1(ddata, JBT_REG_VSC_VOLTAGE, 0x2b); - r |= jbt_reg_write_1(ddata, JBT_REG_VCOM_VOLTAGE, 0x40); - r |= jbt_reg_write_1(ddata, JBT_REG_EXT_DISPL, 0x03); - r |= jbt_reg_write_1(ddata, JBT_REG_DCCLK_DCEV, 0x04); - /* - * default of 0x02 in JBT_REG_ASW_SLEW responsible for 72Hz requirement - * to avoid red / blue flicker - */ - r |= jbt_reg_write_1(ddata, JBT_REG_ASW_SLEW, 0x04); - r |= jbt_reg_write_1(ddata, JBT_REG_DUMMY_DISPLAY, 0x00); - - r |= jbt_reg_write_1(ddata, JBT_REG_SLEEP_OUT_FR_A, 0x11); - r |= jbt_reg_write_1(ddata, JBT_REG_SLEEP_OUT_FR_B, 0x11); - r |= jbt_reg_write_1(ddata, JBT_REG_SLEEP_OUT_FR_C, 0x11); - r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_D, 0x2040); - r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_E, 0x60c0); - r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_F, 0x1020); - r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_G, 0x60c0); - - r |= jbt_reg_write_2(ddata, JBT_REG_GAMMA1_FINE_1, 0x5533); - r |= jbt_reg_write_1(ddata, JBT_REG_GAMMA1_FINE_2, 0x00); - r |= jbt_reg_write_1(ddata, JBT_REG_GAMMA1_INCLINATION, 0x00); - r |= jbt_reg_write_1(ddata, JBT_REG_GAMMA1_BLUE_OFFSET, 0x00); - - r |= jbt_reg_write_2(ddata, JBT_REG_HCLOCK_VGA, 0x1f0); - r |= jbt_reg_write_1(ddata, JBT_REG_BLANK_CONTROL, 0x02); - r |= jbt_reg_write_2(ddata, JBT_REG_BLANK_TH_TV, 0x0804); - - r |= jbt_reg_write_1(ddata, JBT_REG_CKV_ON_OFF, 0x01); - r |= jbt_reg_write_2(ddata, JBT_REG_CKV_1_2, 0x0000); - - r |= jbt_reg_write_2(ddata, JBT_REG_OEV_TIMING, 0x0d0e); - r |= jbt_reg_write_2(ddata, JBT_REG_ASW_TIMING_1, 0x11a4); - r |= jbt_reg_write_1(ddata, JBT_REG_ASW_TIMING_2, 0x0e); - - r |= jbt_ret_write_0(ddata, JBT_REG_DISPLAY_ON); - - if (r) - dev_err(dssdev->dev, "%s: write error\n", __func__); - - backlight_enable(ddata->backlight); -} - -static void td028ttec1_panel_disable(struct omap_dss_device *dssdev) -{ - struct panel_drv_data *ddata = to_panel_data(dssdev); - - backlight_disable(ddata->backlight); - - dev_dbg(dssdev->dev, "td028ttec1_panel_disable()\n"); - - jbt_ret_write_0(ddata, JBT_REG_DISPLAY_OFF); - jbt_reg_write_2(ddata, JBT_REG_OUTPUT_CONTROL, 0x8002); - jbt_ret_write_0(ddata, JBT_REG_SLEEP_IN); - jbt_reg_write_1(ddata, JBT_REG_POWER_ON_OFF, 0x00); -} - -static int td028ttec1_panel_get_modes(struct omap_dss_device *dssdev, - struct drm_connector *connector) -{ - struct panel_drv_data *ddata = to_panel_data(dssdev); - - return omapdss_display_get_modes(connector, &ddata->vm); -} - -static const struct omap_dss_device_ops td028ttec1_ops = { - .connect = td028ttec1_panel_connect, - .disconnect = td028ttec1_panel_disconnect, - - .enable = td028ttec1_panel_enable, - .disable = td028ttec1_panel_disable, - - .get_modes = td028ttec1_panel_get_modes, -}; - -static int td028ttec1_panel_probe(struct spi_device *spi) -{ - struct panel_drv_data *ddata; - struct omap_dss_device *dssdev; - int r; - - dev_dbg(&spi->dev, "%s\n", __func__); - - spi->bits_per_word = 9; - spi->mode = SPI_MODE_3; - - r = spi_setup(spi); - if (r < 0) { - dev_err(&spi->dev, "spi_setup failed: %d\n", r); - return r; - } - - ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL); - if (ddata == NULL) - return -ENOMEM; - - ddata->backlight = devm_of_find_backlight(&spi->dev); - if (IS_ERR(ddata->backlight)) - return PTR_ERR(ddata->backlight); - - dev_set_drvdata(&spi->dev, ddata); - - ddata->spi_dev = spi; - - ddata->vm = td028ttec1_panel_vm; - - dssdev = &ddata->dssdev; - dssdev->dev = &spi->dev; - dssdev->ops = &td028ttec1_ops; - dssdev->type = OMAP_DISPLAY_TYPE_DPI; - dssdev->display = true; - dssdev->owner = THIS_MODULE; - dssdev->of_port = 0; - dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES; - - /* - * Note: According to the panel documentation: - * SYNC needs to be driven on the FALLING edge - */ - dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH - | DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE - | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE; - - omapdss_display_init(dssdev); - omapdss_device_register(dssdev); - - return 0; -} - -static int td028ttec1_panel_remove(struct spi_device *spi) -{ - struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev); - struct omap_dss_device *dssdev = &ddata->dssdev; - - dev_dbg(&ddata->spi_dev->dev, "%s\n", __func__); - - omapdss_device_unregister(dssdev); - - td028ttec1_panel_disable(dssdev); - - return 0; -} - -static const struct of_device_id td028ttec1_of_match[] = { - { .compatible = "omapdss,tpo,td028ttec1", }, - /* keep to not break older DTB */ - { .compatible = "omapdss,toppoly,td028ttec1", }, - {}, -}; - -MODULE_DEVICE_TABLE(of, td028ttec1_of_match); - -static const struct spi_device_id td028ttec1_ids[] = { - { "toppoly,td028ttec1", 0 }, - { "tpo,td028ttec1", 0}, - { /* sentinel */ } -}; - -MODULE_DEVICE_TABLE(spi, td028ttec1_ids); - - -static struct spi_driver td028ttec1_spi_driver = { - .probe = td028ttec1_panel_probe, - .remove = td028ttec1_panel_remove, - .id_table = td028ttec1_ids, - - .driver = { - .name = "panel-tpo-td028ttec1", - .of_match_table = td028ttec1_of_match, - .suppress_bind_attrs = true, - }, -}; - -module_spi_driver(td028ttec1_spi_driver); - -MODULE_AUTHOR("H. Nikolaus Schaller hns@goldelico.com"); -MODULE_DESCRIPTION("Toppoly TD028TTEC1 panel driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td043mtea1.c b/drivers/gpu/drm/omapdrm/displays/panel-tpo-td043mtea1.c deleted file mode 100644 index c667f4287893..000000000000 --- a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td043mtea1.c +++ /dev/null @@ -1,513 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * TPO TD043MTEA1 Panel driver - * - * Author: Gražvydas Ignotas notasas@gmail.com - * Converted to new DSS device model: Tomi Valkeinen tomi.valkeinen@ti.com - */ - -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/gpio/consumer.h> -#include <linux/module.h> -#include <linux/regulator/consumer.h> -#include <linux/slab.h> -#include <linux/spi/spi.h> - -#include "../dss/omapdss.h" - -#define TPO_R02_MODE(x) ((x) & 7) -#define TPO_R02_MODE_800x480 7 -#define TPO_R02_NCLK_RISING BIT(3) -#define TPO_R02_HSYNC_HIGH BIT(4) -#define TPO_R02_VSYNC_HIGH BIT(5) - -#define TPO_R03_NSTANDBY BIT(0) -#define TPO_R03_EN_CP_CLK BIT(1) -#define TPO_R03_EN_VGL_PUMP BIT(2) -#define TPO_R03_EN_PWM BIT(3) -#define TPO_R03_DRIVING_CAP_100 BIT(4) -#define TPO_R03_EN_PRE_CHARGE BIT(6) -#define TPO_R03_SOFTWARE_CTL BIT(7) - -#define TPO_R04_NFLIP_H BIT(0) -#define TPO_R04_NFLIP_V BIT(1) -#define TPO_R04_CP_CLK_FREQ_1H BIT(2) -#define TPO_R04_VGL_FREQ_1H BIT(4) - -#define TPO_R03_VAL_NORMAL (TPO_R03_NSTANDBY | TPO_R03_EN_CP_CLK | \ - TPO_R03_EN_VGL_PUMP | TPO_R03_EN_PWM | \ - TPO_R03_DRIVING_CAP_100 | TPO_R03_EN_PRE_CHARGE | \ - TPO_R03_SOFTWARE_CTL) - -#define TPO_R03_VAL_STANDBY (TPO_R03_DRIVING_CAP_100 | \ - TPO_R03_EN_PRE_CHARGE | TPO_R03_SOFTWARE_CTL) - -static const u16 tpo_td043_def_gamma[12] = { - 105, 315, 381, 431, 490, 537, 579, 686, 780, 837, 880, 1023 -}; - -struct panel_drv_data { - struct omap_dss_device dssdev; - - struct videomode vm; - - struct spi_device *spi; - struct regulator *vcc_reg; - struct gpio_desc *reset_gpio; - u16 gamma[12]; - u32 mode; - u32 vmirror:1; - u32 powered_on:1; - u32 spi_suspended:1; - u32 power_on_resume:1; -}; - -static const struct videomode tpo_td043_vm = { - .hactive = 800, - .vactive = 480, - - .pixelclock = 36000000, - - .hsync_len = 1, - .hfront_porch = 68, - .hback_porch = 214, - - .vsync_len = 1, - .vfront_porch = 39, - .vback_porch = 34, - - .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW, -}; - -#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev) - -static int tpo_td043_write(struct spi_device *spi, u8 addr, u8 data) -{ - struct spi_message m; - struct spi_transfer xfer; - u16 w; - int r; - - spi_message_init(&m); - - memset(&xfer, 0, sizeof(xfer)); - - w = ((u16)addr << 10) | (1 << 8) | data; - xfer.tx_buf = &w; - xfer.bits_per_word = 16; - xfer.len = 2; - spi_message_add_tail(&xfer, &m); - - r = spi_sync(spi, &m); - if (r < 0) - dev_warn(&spi->dev, "failed to write to LCD reg (%d)\n", r); - return r; -} - -static void tpo_td043_write_gamma(struct spi_device *spi, u16 gamma[12]) -{ - u8 i, val; - - /* gamma bits [9:8] */ - for (val = i = 0; i < 4; i++) - val |= (gamma[i] & 0x300) >> ((i + 1) * 2); - tpo_td043_write(spi, 0x11, val); - - for (val = i = 0; i < 4; i++) - val |= (gamma[i+4] & 0x300) >> ((i + 1) * 2); - tpo_td043_write(spi, 0x12, val); - - for (val = i = 0; i < 4; i++) - val |= (gamma[i+8] & 0x300) >> ((i + 1) * 2); - tpo_td043_write(spi, 0x13, val); - - /* gamma bits [7:0] */ - for (val = i = 0; i < 12; i++) - tpo_td043_write(spi, 0x14 + i, gamma[i] & 0xff); -} - -static int tpo_td043_write_mirror(struct spi_device *spi, bool h, bool v) -{ - u8 reg4 = TPO_R04_NFLIP_H | TPO_R04_NFLIP_V | - TPO_R04_CP_CLK_FREQ_1H | TPO_R04_VGL_FREQ_1H; - if (h) - reg4 &= ~TPO_R04_NFLIP_H; - if (v) - reg4 &= ~TPO_R04_NFLIP_V; - - return tpo_td043_write(spi, 4, reg4); -} - -static ssize_t tpo_td043_vmirror_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct panel_drv_data *ddata = dev_get_drvdata(dev); - - return snprintf(buf, PAGE_SIZE, "%d\n", ddata->vmirror); -} - -static ssize_t tpo_td043_vmirror_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t count) -{ - struct panel_drv_data *ddata = dev_get_drvdata(dev); - int val; - int ret; - - ret = kstrtoint(buf, 0, &val); - if (ret < 0) - return ret; - - val = !!val; - - ret = tpo_td043_write_mirror(ddata->spi, false, val); - if (ret < 0) - return ret; - - ddata->vmirror = val; - - return count; -} - -static ssize_t tpo_td043_mode_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct panel_drv_data *ddata = dev_get_drvdata(dev); - - return snprintf(buf, PAGE_SIZE, "%d\n", ddata->mode); -} - -static ssize_t tpo_td043_mode_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t count) -{ - struct panel_drv_data *ddata = dev_get_drvdata(dev); - long val; - int ret; - - ret = kstrtol(buf, 0, &val); - if (ret != 0 || val & ~7) - return -EINVAL; - - ddata->mode = val; - - val |= TPO_R02_NCLK_RISING; - tpo_td043_write(ddata->spi, 2, val); - - return count; -} - -static ssize_t tpo_td043_gamma_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct panel_drv_data *ddata = dev_get_drvdata(dev); - ssize_t len = 0; - int ret; - int i; - - for (i = 0; i < ARRAY_SIZE(ddata->gamma); i++) { - ret = snprintf(buf + len, PAGE_SIZE - len, "%u ", - ddata->gamma[i]); - if (ret < 0) - return ret; - len += ret; - } - buf[len - 1] = '\n'; - - return len; -} - -static ssize_t tpo_td043_gamma_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t count) -{ - struct panel_drv_data *ddata = dev_get_drvdata(dev); - unsigned int g[12]; - int ret; - int i; - - ret = sscanf(buf, "%u %u %u %u %u %u %u %u %u %u %u %u", - &g[0], &g[1], &g[2], &g[3], &g[4], &g[5], - &g[6], &g[7], &g[8], &g[9], &g[10], &g[11]); - - if (ret != 12) - return -EINVAL; - - for (i = 0; i < 12; i++) - ddata->gamma[i] = g[i]; - - tpo_td043_write_gamma(ddata->spi, ddata->gamma); - - return count; -} - -static DEVICE_ATTR(vmirror, S_IRUGO | S_IWUSR, - tpo_td043_vmirror_show, tpo_td043_vmirror_store); -static DEVICE_ATTR(mode, S_IRUGO | S_IWUSR, - tpo_td043_mode_show, tpo_td043_mode_store); -static DEVICE_ATTR(gamma, S_IRUGO | S_IWUSR, - tpo_td043_gamma_show, tpo_td043_gamma_store); - -static struct attribute *tpo_td043_attrs[] = { - &dev_attr_vmirror.attr, - &dev_attr_mode.attr, - &dev_attr_gamma.attr, - NULL, -}; - -static const struct attribute_group tpo_td043_attr_group = { - .attrs = tpo_td043_attrs, -}; - -static int tpo_td043_power_on(struct panel_drv_data *ddata) -{ - int r; - - if (ddata->powered_on) - return 0; - - r = regulator_enable(ddata->vcc_reg); - if (r != 0) - return r; - - /* wait for panel to stabilize */ - msleep(160); - - gpiod_set_value(ddata->reset_gpio, 0); - - tpo_td043_write(ddata->spi, 2, - TPO_R02_MODE(ddata->mode) | TPO_R02_NCLK_RISING); - tpo_td043_write(ddata->spi, 3, TPO_R03_VAL_NORMAL); - tpo_td043_write(ddata->spi, 0x20, 0xf0); - tpo_td043_write(ddata->spi, 0x21, 0xf0); - tpo_td043_write_mirror(ddata->spi, false, ddata->vmirror); - tpo_td043_write_gamma(ddata->spi, ddata->gamma); - - ddata->powered_on = 1; - return 0; -} - -static void tpo_td043_power_off(struct panel_drv_data *ddata) -{ - if (!ddata->powered_on) - return; - - tpo_td043_write(ddata->spi, 3, - TPO_R03_VAL_STANDBY | TPO_R03_EN_PWM); - - gpiod_set_value(ddata->reset_gpio, 1); - - /* wait for at least 2 vsyncs before cutting off power */ - msleep(50); - - tpo_td043_write(ddata->spi, 3, TPO_R03_VAL_STANDBY); - - regulator_disable(ddata->vcc_reg); - - ddata->powered_on = 0; -} - -static int tpo_td043_connect(struct omap_dss_device *src, - struct omap_dss_device *dst) -{ - return 0; -} - -static void tpo_td043_disconnect(struct omap_dss_device *src, - struct omap_dss_device *dst) -{ -} - -static void tpo_td043_enable(struct omap_dss_device *dssdev) -{ - struct panel_drv_data *ddata = to_panel_data(dssdev); - int r; - - /* - * If we are resuming from system suspend, SPI clocks might not be - * enabled yet, so we'll program the LCD from SPI PM resume callback. - */ - if (!ddata->spi_suspended) { - r = tpo_td043_power_on(ddata); - if (r) { - dev_err(&ddata->spi->dev, "%s: power on failed (%d)\n", - __func__, r); - return; - } - } -} - -static void tpo_td043_disable(struct omap_dss_device *dssdev) -{ - struct panel_drv_data *ddata = to_panel_data(dssdev); - - if (!ddata->spi_suspended) - tpo_td043_power_off(ddata); -} - -static int tpo_td043_get_modes(struct omap_dss_device *dssdev, - struct drm_connector *connector) -{ - struct panel_drv_data *ddata = to_panel_data(dssdev); - - return omapdss_display_get_modes(connector, &ddata->vm); -} - -static const struct omap_dss_device_ops tpo_td043_ops = { - .connect = tpo_td043_connect, - .disconnect = tpo_td043_disconnect, - - .enable = tpo_td043_enable, - .disable = tpo_td043_disable, - - .get_modes = tpo_td043_get_modes, -}; - -static int tpo_td043_probe(struct spi_device *spi) -{ - struct panel_drv_data *ddata; - struct omap_dss_device *dssdev; - struct gpio_desc *gpio; - int r; - - dev_dbg(&spi->dev, "%s\n", __func__); - - spi->bits_per_word = 16; - spi->mode = SPI_MODE_0; - - r = spi_setup(spi); - if (r < 0) { - dev_err(&spi->dev, "spi_setup failed: %d\n", r); - return r; - } - - ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL); - if (ddata == NULL) - return -ENOMEM; - - dev_set_drvdata(&spi->dev, ddata); - - ddata->spi = spi; - - ddata->mode = TPO_R02_MODE_800x480; - memcpy(ddata->gamma, tpo_td043_def_gamma, sizeof(ddata->gamma)); - - ddata->vcc_reg = devm_regulator_get(&spi->dev, "vcc"); - if (IS_ERR(ddata->vcc_reg)) { - dev_err(&spi->dev, "failed to get LCD VCC regulator\n"); - return PTR_ERR(ddata->vcc_reg); - } - - gpio = devm_gpiod_get(&spi->dev, "reset", GPIOD_OUT_HIGH); - if (IS_ERR(gpio)) { - dev_err(&spi->dev, "failed to get reset gpio\n"); - return PTR_ERR(gpio); - } - - ddata->reset_gpio = gpio; - - r = sysfs_create_group(&spi->dev.kobj, &tpo_td043_attr_group); - if (r) { - dev_err(&spi->dev, "failed to create sysfs files\n"); - return r; - } - - ddata->vm = tpo_td043_vm; - - dssdev = &ddata->dssdev; - dssdev->dev = &spi->dev; - dssdev->ops = &tpo_td043_ops; - dssdev->type = OMAP_DISPLAY_TYPE_DPI; - dssdev->display = true; - dssdev->owner = THIS_MODULE; - dssdev->of_port = 0; - dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES; - - /* - * Note: According to the panel documentation: - * SYNC needs to be driven on the FALLING edge - */ - dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH - | DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE - | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE; - - omapdss_display_init(dssdev); - omapdss_device_register(dssdev); - - return 0; -} - -static int tpo_td043_remove(struct spi_device *spi) -{ - struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev); - struct omap_dss_device *dssdev = &ddata->dssdev; - - dev_dbg(&ddata->spi->dev, "%s\n", __func__); - - omapdss_device_unregister(dssdev); - - if (omapdss_device_is_enabled(dssdev)) - tpo_td043_disable(dssdev); - - sysfs_remove_group(&spi->dev.kobj, &tpo_td043_attr_group); - - return 0; -} - -#ifdef CONFIG_PM_SLEEP -static int tpo_td043_spi_suspend(struct device *dev) -{ - struct panel_drv_data *ddata = dev_get_drvdata(dev); - - dev_dbg(dev, "tpo_td043_spi_suspend, tpo %p\n", ddata); - - ddata->power_on_resume = ddata->powered_on; - tpo_td043_power_off(ddata); - ddata->spi_suspended = 1; - - return 0; -} - -static int tpo_td043_spi_resume(struct device *dev) -{ - struct panel_drv_data *ddata = dev_get_drvdata(dev); - int ret; - - dev_dbg(dev, "tpo_td043_spi_resume\n"); - - if (ddata->power_on_resume) { - ret = tpo_td043_power_on(ddata); - if (ret) - return ret; - } - ddata->spi_suspended = 0; - - return 0; -} -#endif - -static SIMPLE_DEV_PM_OPS(tpo_td043_spi_pm, - tpo_td043_spi_suspend, tpo_td043_spi_resume); - -static const struct of_device_id tpo_td043_of_match[] = { - { .compatible = "omapdss,tpo,td043mtea1", }, - {}, -}; - -MODULE_DEVICE_TABLE(of, tpo_td043_of_match); - -static struct spi_driver tpo_td043_spi_driver = { - .driver = { - .name = "panel-tpo-td043mtea1", - .pm = &tpo_td043_spi_pm, - .of_match_table = tpo_td043_of_match, - .suppress_bind_attrs = true, - }, - .probe = tpo_td043_probe, - .remove = tpo_td043_remove, -}; - -module_spi_driver(tpo_td043_spi_driver); - -MODULE_ALIAS("spi:tpo,td043mtea1"); -MODULE_AUTHOR("Gražvydas Ignotas notasas@gmail.com"); -MODULE_DESCRIPTION("TPO TD043MTEA1 LCD Driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c b/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c index 24e36d68f3c4..caa291ea1c5c 100644 --- a/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c +++ b/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c @@ -185,14 +185,7 @@ static const struct of_device_id omapdss_of_match[] __initconst = { };
static const struct of_device_id omapdss_of_fixups_whitelist[] __initconst = { - { .compatible = "lgphilips,lb035q02" }, - { .compatible = "nec,nl8048hl11" }, { .compatible = "panel-dsi-cm" }, - { .compatible = "sharp,ls037v7dw01" }, - { .compatible = "sony,acx565akm" }, - { .compatible = "toppoly,td028ttec1" }, - { .compatible = "tpo,td028ttec1" }, - { .compatible = "tpo,td043mtea1" }, {}, };